Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Clearwater
Door installation in Clearwater runs $800-$4,200 for most entry and storm door replacements, with impact-rated units and custom French doors landing on the higher end. Our crews know Clearwater’s housing stock well: 1950s-70s concrete block construction, salt air on both sides of the peninsula, and wind codes most door suppliers miss. Call (954) 280-4413 and we’ll send a technician who measures twice, quotes on paper, and registers both warranty layers before leaving your driveway.
We serve Clearwater from our South Florida dispatch office, with local crews who work these neighborhoods every week. You get a live person when you call, not a call center or a voicemail tree. That matters when a door binds in August or a storm is three days out and you need straight answers about wind ratings and lead times.
Why TruePane Windows & Doors Is Clearwater’s Preferred Door Installation Company
Clearwater homeowners tend to know their houses. Many have lived in them for twenty years or more. They remember the contractor who set a door out of plumb and disappeared when the jamb started pulling away from the block. That is exactly the history TruePane was founded to correct.
Dale Kessler started this company in 2008 as a second-generation glazier who had watched too many out-of-true installs and voided warranty claims. The rule on his whiteboard has not changed: if the pane is not true, the job is not done. That applies to every door we hang in Clearwater, from a simple storm door in Skycrest to a custom pivot door on Island Estates.
Our Door Installation team shows up in uniform, background-checked, and with the manufacturer’s spec sheet in hand. We register both warranty layers in writing before the truck leaves your driveway. That is The Keystone Standard, and we put it on every quote.
Clearwater residents also get the Done Right Promise. If something is not right, we make it right. No paperwork fights, no arguing, no fine print that covers neither. We’ve built our reputation in Clearwater the same way we’ve built it everywhere else we work: one door at a time, done correctly, with a company that plans to be in town thirty years from now.
Our Door Installation Services in Clearwater
Entry & Swing Doors
A front entry door in Clearwater does more than open and close. It is the first line of defense against wind-driven rain off the Gulf and the salt-laden air that comes off Tampa Bay. We install impact-rated entry doors that meet Florida Product Approval wind-load requirements for coastal Pinellas County, which means the 130+ mph design wind speed, not the inland standard. If your current door is a hollow-core slab from the 1970s, it is likely not doing what your insurance company now expects it to do.
Storm Doors
Storm doors make sense in Clearwater for a specific reason: they protect your primary entry door from the salt spray and UV that eat finishes and hardware faster here than almost anywhere in Florida. We install storm doors with corrosion-resistant hardware and properly flashed sill pans. The goal is a door that outlasts the next three hurricane seasons without the hinges seizing or the closer failing.
Double & French Doors
Double and French doors in Clearwater need more than good looks. We frame and flash them for the wind loads this peninsula actually sees. That means fusion-welded frame legs, jamb anchors set into the concrete block, and flashing tape at every transition. Too many Clearwater French doors were originally set with wood shims and hope. We set them so they stay square through a Category 2.
Bifold & Folding Doors
Bifold and folding door systems expand a Clearwater living room onto a patio or pool deck. They also create large openings that code treats as part of the building envelope. We install folding doors tested to Florida wind-borne debris standards, with the proper top track reinforcement and drainage at the sill. The last thing you want is a 16-foot opening that leaks or racks out of square during the first summer storm. We make sure that does not happen.
Pivot Doors
Pivot doors are a statement piece, and in Clearwater they are increasingly common in newer builds along the beach corridor. They are also heavy, and they demand a level subfloor and a properly reinforced header. We handle pivot door installation as a structural job, not a cosmetic one. That means checking the rough opening, confirming load path, and setting the pivot hardware so the door swings true on day one and year fourteen.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Clearwater
TruePane is an authorized installer for more than a dozen manufacturer lines, including, PGT, and CGI. For Clearwater specifically, we regularly install doors from CGI, ES Windows, and ECO Window Systems because these manufacturers build products tested for the Florida coastal wind and salt environment. We keep common hardware and replacement parts available for fast turnaround on service calls across Clearwater. When you sit down with us, we quote manufacturer lines side by side on paper so you see exactly what you are buying, what each unit costs, and what the warranty actually covers in writing.
Common Door Installation Problems We See in Clearwater Homes
- Rusted-out door jambs from dual salt-air exposure. Clearwater’s peninsula geography means doors get hit with corrosive Gulf air from the west and bay air from the east. Frame oxidation and hardware seizure show up years before the same door would fail inland. We regularly replace jambs where the screws have stripped out of the concrete block entirely.
- Undersized or deteriorated rough openings in 1950s-70s CBS homes. Original door frames in Clearwater’s concrete block houses were often set without structural anchors. New impact-rated units are heavier and carry wind-load requirements the old framing was never designed to meet. That means reframing and additional anchoring before we set the new door.
- Failed waterproofing at sill pans and thresholds. Clearwater’s heavy summer downpours, combined with salt spray, find every gap in an improperly flashed threshold. Water gets behind the jamb, rots the subfloor, and triggers mold before the homeowner sees a stain. Proper flashing tape and a correctly sloped sill pan stop this before it starts.
- Improperly flashed side lights and transoms on custom doors. Clearwater’s intense UV and wind-driven rain will exploit any gap in flashing around glass panels next to a door. We see argon loss in insulated glass units adjacent to doors where the flashing was skipped. Our crews flash every transition, every time.
How Clearwater Door Replacement Intersects With Florida Wind Codes and Insurance
Here is the thing most Clearwater homeowners do not hear from a door salesperson: a new door is not just a door in this city. It is a wind mitigation credit on your insurance policy, or it should be. Clearwater sits in Florida’s wind-borne debris region. The design wind speed for coastal Pinellas County is over 130 mph. A standard door unit sold at a big-box store in Tampa or Orlando cannot legally be installed in most of Clearwater because it will not meet Florida Product Approval wind-load ratings. If you install it anyway, it fails the wind mitigation inspection your insurer now requires, and you lose the premium credit or the coverage itself.
We handle this directly. Every door we install in Clearwater comes with the documentation you need for a wind mitigation report: product approval numbers, installation standards followed, and a clear paper trail for your insurance agent. We also schedule the inspection after install so you can get the credit applied without chasing paperwork for six weeks. Last month our crew replaced a corroded 1960s aluminum slider entry in the Greenwood neighborhood. The original jamb had salt-air oxidation so severe the screws stripped out of the concrete block, and the existing rough opening was built for old single-pane glass with no flashing tape. We reframed the opening to accept a new impact-rated insulated glass unit door, installed fusion-welded frame legs with proper jamb anchors, and wrapped the perimeter in flashing tape before setting the unit, then scheduled the wind mitigation inspection so the homeowner could finally get a competitive insurance quote.
That is the difference between a door installer and a company that understands what a door means on Clearwater’s peninsula. We do the second thing.
Pricing for Door Installation in Clearwater, FL
Clearwater door installation pricing runs as follows: a basic storm door starts around $800-$1,400 installed. A standard entry door with a steel or fiberglass slab runs $1,500-$3,200. Impact-rated entry doors, which most Clearwater homes should consider, run $2,200-$4,200 depending on manufacturer and glass package. Double and French doors start around $3,500 and climb based on size and wind-load requirements. Custom pivot doors run $5,000 and up.
What moves the number: whether the rough opening needs reframing, whether the existing jamb is salvageable, what wind-load rating the unit must meet, and whether your HOA requires a specific exterior finish. We write all of this into a line-item quote before work begins. No change orders appear out of nowhere, and any surprise we find once we open the wall is priced and approved in writing before we touch it. Call (954) 280-4413 for a free estimate with real numbers, not a vague range and a handshake.
We Also Serve Cities Near Clearwater
Beyond Clearwater, our crews regularly handle door installation in Clearwater‘s neighboring communities, including Largo, Belleair Beach, Safety Harbor, and Dunedin. If you live near Clearwater in one of those cities, call (954) 280-4413 and we’ll confirm crew availability for your area. You get the same live person on the phone, the same Keystone Standard, and the same Done Right Promise.
Serving Clearwater, FL - Our Local Coverage Area
We’re based in the Clearwater area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Clearwater
Yes. Door replacement in Clearwater requires a permit when the opening size changes, when structural work is involved, or when you are upgrading to impact-rated units that must meet current Florida Building Code wind-load requirements. What many homeowners do not expect is the code upgrade the permit triggers once we open the wall. If the existing framing is undersized or deteriorated, which is common in 1950s-70s CBS homes, we must bring it to current code before the inspector signs off. Our approach is inspection first. We price allowances for likely framing and waterproofing work into the contract, and any additional finding is quoted and approved in writing before we proceed. Call (954) 280-4413 and we’ll walk you through exactly what your permit will require.
Because Clearwater is a peninsula with salt water on two sides. Gulf of Mexico air hits the west side of your house, Tampa Bay air hits the east. That dual exposure means aluminum frames oxidize and steel hardware corrodes at roughly double the rate of inland Pinellas or Hillsborough County homes. A door frame that might last thirty years in Brandon fails in fifteen here. The fix is impact-rated units with powder-coated or anodized frames and stainless or marine-grade hardware, installed with proper flashing so salt water never reaches the structural anchors. We install this type of hardware as standard on Clearwater door replacements, not as an upsell.
It depends on what the existing frame looks like once we inspect it. In many Clearwater homes built between the late 1950s and the 1970s, the original jamb is either rusted, out of square, or set without proper anchors. If the frame is structurally sound and square, a slab replacement is possible. If it is not, and our inspection says it is not, a full frame replacement is the only way to get a door that seals, swings, and meets wind-load code. Slab replacements in Clearwater typically run $600-$1,400; full frame replacements run $1,500-$4,200 depending on the unit. We will show you the condition of your frame and let you decide with real information, not a sales pitch. Call (954) 280-4413 for an inspection and a written quote.
HOA approval is often the longest lead time item in a Clearwater beach condo door replacement. Many associations in the beach corridor require specific exterior finishes, specific hurricane ratings, or specific manufacturer lines, and some must approve the install plan before the permit even moves. Florida’s high-rise building code adds a separate set of requirements for buildings over 75 feet. We handle this by working with your association’s approval process from day one. We submit the product specs, finish samples, and installation standards they need to see, and we do not start work until the approval is in writing. If you are unsure whether your condo board will approve a given door, call (954) 280-4413 and we’ll help you navigate it.
You get a complete documentation package for every opening we replace or install: the Florida Product Approval number for the door unit, the installation standard used, the date of install, and the address of the property. This is exactly what a wind mitigation inspector or your insurance agent needs to apply the credits for impact-rated openings. We also schedule the inspection or coordinate with your inspector so the paperwork is complete before you submit to your insurer. No Clearwater homeowner should have to chase documentation for weeks after the install. That is part of The Keystone Standard, and it applies to every door we set in Clearwater. Call (954) 280-4413 to schedule your free estimate and get the documentation process started.
Contact TruePane Windows & Doors in Clearwater
If you live in Clearwater and you are tired of living with a door that binds, leaks, or will not pass a wind mitigation inspection, call us. You will get a live person on the phone, not a voicemail tree. We will schedule a time for a background-checked, uniformed technician to measure your openings, inspect the existing framing, and quote you real numbers on paper. Then we install the door correctly, register both warranty layers in writing, and stand behind the work for 90 days with the Done Right Promise. That is the deal in Clearwater, and it has been for a long time.
Call (954) 280-4413 to schedule your free estimate.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Clearwater with craft and the Keystone Standard since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.