Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Geneva
Door installation in Geneva, FL typically runs $1,900-$4,800 for a standard exterior entry door, with storm doors at $700-$1,600 and French or double door units between $3,200 and $7,400 depending on impact glazing and framing condition. Most jobs we handle in Geneva complete in one visit, but the older riverside homes here often hide rotten sill plates that turn a straightforward swap into a half-day of carpentry first. We know those houses. We know Snead Road, East Geneva, the acreage off Snow Hill, and we know what Seminole County’s floodplain rules mean for every opening we set. If you’re standing in front of a door that binds, sags, or lets daylight through the weatherstripping, call (954) 280-4413 for a free estimate. We will measure it twice and tell you what it will take before any work begins.
Why TruePane Windows & Doors Is Geneva’s Preferred Door Installation Company
Dale Kessler founded TruePane Windows & Doors in 2008 on a rule that still hangs on the shop whiteboard: if the pane is not true, the job is not done. That is what we bring to every door opening in Geneva, whether it is a 1950s frame cottage on a dirt road or a newer build on a cleared five-acre lot. Our Door Installation team has worked enough of Geneva’s older homes to know that the door itself is only half the job. The framing, the threshold, the flashing, the jamb depth against the stucco or wood siding, all of it matters more out here where ground moisture from the St. Johns floodplain sits against a house year-round.
Geneva homeowners do not call us because they want a quick bid and a fast sell. They call because the door has been sticking since the last rainy season, or the French door glass fogged up a year after some other crew set it, and they are done accepting less. They want a company that answers the phone when they call. Ours does. A live person picks up 24 hours a day, 7 days a week. Not a voicemail tree. Not a regional call center. Somebody who can actually help.
Every technician we send to Geneva is background-checked and uniformed. They measure every opening twice. They quote manufacturer lines side by side on paper, so you see exactly what you are buying and what it costs before you sign anything. Then we register both warranty layers in writing, durations stated, before the truck leaves your driveway. That is The Keystone Standard. It is not a slogan. It is the way we have done every job since 2008 of combined craft heritage, and it is the same standard whether we are setting a $700 storm door or a $7,000 impact-rated French unit.
Our Door Installation Services in Geneva
Entry & Swing Doors
Entry doors in Geneva take more abuse than nearly anywhere else in Seminole County, because the air stays humid year-round and the afternoon thunderstorms hit hard during summer. A swing door that is set out of true will swell, bind, and eventually pull its hinges loose from the jamb. We set our entry doors with full sill pans, flashing tape at the rough opening, and jamb screws that bite into framing, not just trim. If your door is an original from the 1960s or 1970s, expect us to check the sill plate before quoting. In Geneva, that is usually where the real problem lives.
Double & French Doors
French doors, particularly east-facing units on homes near the Econlockhatchee River or along East Geneva’s low ground, are the most common casualty of two things: morning sun on one side and floodplain humidity on the other. The thermal stress works the seals loose, and moisture wicks up through the threshold into the frame. We regularly replace double French doors in Geneva where the glass has fogged within five or six years because the original unit was set directly on a slab with no capillary break. We quote the full solution, not just the panel swap, because doing it half-right out here means doing it again in three years.
On a 1960s cracker-style home near the Econlockhatchee River, we replaced a rotted east-facing double French door that had been set directly on a slab built before modern moisture barriers. Our crew found the original threshold sitting on a sill plate softened by decades of high water-table damp. We sistered the rotten framing, flashed the rough opening with a full sill pan and flashing tape, then set a new Andersen 400 Series Frenchwood unit with impact-rated low-E glazing, bringing the opening into full Florida Building Code compliance. That is the difference between a door company and a crew that actually understands Geneva’s older homes.
Bifold & Folding Doors
Bifold and folding door systems are popular on Geneva acreage homes where owners want the back of the house opened up to a patio or pool screen. These are heavy units, and on a raised wood-frame home with pier foundations, which is common in this area, the rough opening has to be engineered correctly before the first panel goes in. We check header support, floor deflection, and track level, because a folding door that is even an eighth of an inch out of level will fight you for the rest of its life. For detached outbuildings and shops, we scoped the need for extra framing reinforcement on nearly every large folding door we have set in Geneva.
Pivot Doors
Pivot doors are a bigger commitment. They are heavier than a standard hinged entry, which means Geneva’s soft, wet ground matters less than the framing we tie into. On an older home with original rough openings cut for a 30 or 32 inch door, installing a pivot system usually means reframing the opening entirely. PGT and CGI both make pivot-capable impact units, and we have set enough of them on Geneva’s larger custom homes to know exactly what the Sem inole County inspector will want to see before sign-off. If you are considering one, call us before you buy the door. The opening always dictates the plan, not the other way around.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Geneva
We are an authorized installer for more than a dozen manufacturer lines, including, PGT, and CGI. For Geneva specifically, we carry and service Ply Gem and CWS units as well. Why does that matter to a homeowner in Geneva? Because when a manufacturer warranty claim requires a factory-authorized installer, you do not want to be the person hunting for one in July. We keep parts common to this area’s homes, we know which impact ratings Seminole County accepts, and we can quote PGT and Andersen side by side on paper so you see the difference in cost, glass package, and warranty length before you spend a dollar.
Common Door Installation Problems We See in Geneva Homes
- Rotted threshold plates and door jambs. Geneva’s position in the St. Johns River floodplain means the ground holds moisture at the foundation line for months at a time. Original wood sills and jambs on homes built between the 1940s and 1970s eventually soften and collapse, which is why a door that racks or binds is rarely fixable by planing the edge.
- Single-pane or louvered door panels that fail Seminole County’s impact test. Many original doors in Geneva do not meet current Florida Building Code large-missile requirements. A replacement means a full tear-out to a rated jamb, not a simple insert. We scope that before quoting, so there are no change orders halfway through.
- Wet-season delivery and staging problems. Long gravel or dirt driveways on acreage lots turn soft during the summer rains. We plan material delivery around weather windows and bring equipment that can stage on grass without sinking, which protects both your new door and your yard.
- Foggy glass on French and patio doors. High humidity plus large temperature swings between air-conditioned interiors and Geneva’s sticky outdoor air stress older double-pane seals. Once the desiccant inside the seal is saturated, the panel must be replaced. We see this most often on east-facing units with afternoon sun exposure.
Pricing for Door Installation in Geneva, FL
Key Takeaways:
- Entry and swing doors: $1,900-$4,800 on average in Geneva, including tear-out and basic sill repair.
- Storm doors: $700-$1,600, depending on glazing and whether the existing frame is sound.
- Double and French doors: $3,200-$7,400, with impact-rated glazing at the higher end.
- Bifold and pivot doors: $5,500-$14,000+, because these usually require reframing and structural reinforcement on older homes.
- Full tear-outs with rotten sill replacement add $400-$1,200 to any of the above.
Geneva pricing runs slightly higher than suburban Seminole County because of two factors: many homes need framing repair before a new door can be set, and unincorporated acreage lots mean longer material hauls and more careful staging. We do not pad the quote. We write it line by line, and the price we give you is the price on the bill. No change orders for surprise framing unless you approve them first. Call (954) 280-4413 to schedule a free estimate. We will come to Geneva, measure, and give you a written number you can hold us to.
We Also Serve Cities Near Geneva
TruePane serves Door Installation in Geneva and the surrounding communities of Oviedo, Sanford, Winter Springs, and Goldenrod. If you live near the Seminole-Volusia county line or on the east side toward the river, we are already working in your area. Dispatch and scheduling are coordinated from our South Florida office, and our crews serve Geneva locally.
Serving Geneva, FL - Our Local Coverage Area
We’re based in the Geneva area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Geneva
Geneva is unincorporated Seminole County, which means there is no city building department to pull from. Every exterior door replacement requires a permit through Seminole County’s building division, and any opening in the floodplain or windborne debris zone triggers large-missile impact glazing or approved shutter requirements under Florida Building Code. We handle the permit paperwork as part of our quote, and we have a good working relationship with the county inspectors who cover the Geneva area. Call (954) 280-4413 and we can tell you exactly what your specific door opening will require.
Usually not in Geneva, because what looks like minor threshold rot often extends up into the jamb legs once the door is removed. In this riverside climate, moisture wicks upward from the slab or sill plate into the wood, and by the time you see it, the bottom six to ten inches of the jamb are compromised. We can sometimes sister in new material rather than do a full-frame replacement, but that is a judgment call we make only after the old door is out and the framing is exposed. We will tell you honestly which path your house needs before we quote so there are no surprises mid-job.
Yes, if the opening is being replaced, it must meet current Florida Building Code, regardless of the home’s age or elevation. Seminole County requires large-missile impact protection for exterior door openings in windborne debris regions. The good news is that impact-rated doors also provide better insulation, noise reduction, and security, so you get a functional upgrade along with code compliance. We quote PGT, CGI, Andersen, and other rated lines side by side on paper so you see the real cost difference between panels before committing.
Detached structures on Geneva acreage often sit on slab-on-grade pads with no moisture barrier and no overhang protection, which means we usually need to add a full sill pan and flashing system that a main-house opening might already have. If the structure has pier-and-beam support, the door header may need reinforcement before a heavy unit is installed. We scope the specific building, check the existing framing, and quote the reinforcement as a separate line item if it is needed. That way you know exactly what the structure requires before we start.
Fog between the panes means the insulated glass unit’s seal has failed, and Geneva’s high humidity plus large temperature swings accelerate that failure. Once the seal goes, the argon gas escapes and condensation forms inside the glazing, which cannot be wiped away. The fix is replacing the IG unit or the entire door panel, and in Geneva, where the same conditions will exist after replacement, we recommend impact-rated low-E glazing with a better seal warranty. We register the manufacturer warranty in writing and stand behind the installation for 90 days with our Done Right Promise. Call us for a free look at the door and a straight answer on repair versus replace.
If you are in Geneva and need a door that opens clean, seals tight, and stands up to Seminole County weather, call (954) 280-4413. We will bring a tape measure, a straight answer, and a written quote that holds. That is how we have done it since 2008, and it is how we plan to keep doing it for the next thirty.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Geneva and Seminole County with honest craft and written warranties since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.