Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCWS Custom & Geometric Windows in Fort Lauderdale: What to Know First
TruePane Windows & Doors provides independent CWS custom and geometric window service across Fort Lauderdale, from replacement glass to full geometric unit swaps, with most jobs completed in a single visit. Typical CWS custom window repair or replacement runs $600-$1,800 depending on shape complexity, glass package, and whether the frame is salvageable. We are not affiliated with or authorized by CWS, which means we work for you, not the manufacturer. If you own a CWS arched, radius, or oversized geometric window and something is wrong, call (954) 280-4413 and a live person will answer.
This page is for Fort Lauderdale homeowners who bought CWS windows, live with them daily, and want straight answers about what fails, what it costs to fix, and whether the window is worth saving. We have worked on CWS units from Victoria Park to Coral Ridge, and the patterns are consistent enough that we can tell you what to expect before we even see the window.
Key Takeaways
- We service CWS custom and geometric windows as an independent provider, not a factory arm.
- Most CWS geometric window failures are seal-related or hardware-related, not structural frame failures.
- We register repair work against existing warranty coverage where the manufacturer allows it.
- Quotes are free, written line by line, and good before the first cut is made.
How CWS Products Fail - and How We Fix Them
CWS windows in Fort Lauderdale see heat, salt air, and hurricane-driven rain cycles that inland windows never face. After years of service calls on these units, certain failure patterns show up more than others. Here is what we see most often in the field:
- Seal failure on CWS impact geometric units. Arched and radius CWS windows carry laminated glass that handles wind load well, but the insulated seal around the perimeter of the glass pack breaks down faster in shapes with tight radius bends. The symptom is fogging or condensation between panes that never clears. We replace the insulated glass unit or the full sash, matching the original CWS glass makeup rather than swapping in a thinner aftermarket stack.
- Hardware fatigue on CWS casement and awning shapes. Geometric windows with operable venting sections, especially CWS casement styles with multi-point locks, wear out the hinge hardware after eight to twelve years of daily salt exposure. The window still looks fine but will not seal tightly at the corner. We replace worn hinges and lock points with OEM or matched-grade components, then adjust the sash so it closes square to the frame.
- Frame racking on oversized CWS picture windows. Large fixed geometric units, particularly CWS picture units over six feet on any side, can settle slightly out of square as the wall framing shifts. The glass does not crack, but the frame develops a subtle bow that stresses the seal and makes the window look wavy in certain light. We reset the frame, shim to true, and re-flash before resetting the glass.
- Weep system clogs on CWS horizontal slider and radius combinations. CWS geometric slider windows collect water in the track channels, and Fort Lauderdale’s afternoon downpours overwhelm a clogged weep system quickly. We clear the weeps, verify drainage, and replace worn track glides so the sash moves without binding.
- Exterior glazing bead shrinkage on shaped CWS units. The vinyl glazing beads on CWS geometric windows shrink and pull away at the corners after years of sun exposure, especially on south and west elevations in neighborhoods like Rio Vista and Las Olas Isles. The bead cracks, water gets behind it, and the seal starts to fail. We replace the bead with a matched profile and re-glaze the opening.
Our CWS Custom & Geometric Windows Process
Every CWS job starts the same way: we listen first, then measure, then put everything on paper. That is Dale Kessler’s rule, and it is why we rarely get surprised on a job site.
- 1
You call (954) 280-4413. A live person answers. We ask what the window is doing, when it started, and what shape and size it is. If you have the original CWS paperwork, great. If not, we still know what to look for.
- 2
We measure and diagnose on site. Our technician opens the window, checks the glass, the seal, the hardware, the frame squareness, and the flashing. We measure the opening twice, because on a geometric window a quarter inch is the difference between a clean fit and a fight.
- 3
You get a written, line-item quote. We show you OEM CWS parts versus matched grade aftermarket, with prices side by side. You decide. No upsell, no pressure.
- 4
We do the work. If the parts are in hand, the job happens in one visit. If the unit needs to be built to spec, we order it and schedule the install. We register warranty coverage in writing before the truck leaves your driveway.
- 5
We test and clean up. The window is opened, closed, locked, and checked for air and water intrusion. The work area is cleaned. You get the written guarantee.
If it is not right on paper, it will not be right on the wall. We live by that.
What CWS Custom & Geometric Windows Costs in Fort Lauderdale
Straight talk on pricing, because you have probably had a contractor give you a number and then change it. Here is what CWS work typically costs in the Fort Lauderdale market:
- Glass replacement on a CWS geometric unit: $400-$900 for standard insulated glass, $700-$1,400 for impact-rated laminated glass in a shaped configuration.
- Full sash replacement on a CWS casement or awning geometric vent: $600-$1,200 depending on size and glass package.
- Hardware rebuild on a CWS multi-point geometric window: $250-$550 for hinges, lock points, and track work.
- Full frame and glass replacement on oversized CWS geometric units: $1,200-$3,500 depending on square footage, glass rating, and whether the opening requires scaffolding or lift access.
What moves the price: the radius or angle complexity, whether the glass is impact-rated, whether the frame is salvageable, and the elevation difficulty. We do not quote a range and then bill above it. Your written quote holds. Call (954) 280-4413 for a free estimate, and we will give you the real number.
Why Fort Lauderdale Homeowners Call TruePane Windows & Doors for CWS Work
We have been serving Fort Lauderdale and the surrounding communities since 2008, and Dale Kessler, our owner and a second-generation glazier, grew up in Sailboat Bend. This is not a franchise play or a lead-buying operation. We are a local shop with local crews, background-checked and uniformed, who show up when they say they will and finish the job the same day when parts are on the truck.
Every CWS job carries our Done Right Promise. If it is not done right, we make it right, no paperwork fights and no fine print. We also handle the other major brands you may have in the same house, including PGT, CGI, ES Windows, and ECO Window Systems, so one call covers the whole home. If the pane is not true, the job is not done. That is the standard we work to, and we put it in writing.
FAQs
We work as an independent CWS service provider, which means we diagnose the problem and make the repair in line with manufacturer specifications, but we do not administer CWS warranty claims directly. What we do is register our workmanship warranty in writing and give you documentation you can file with CWS if the window is still under factory coverage. Call (954) 280-4413 if you want a straight read on whether your issue is warranty-eligible.
We can source OEM CWS replacement parts and glass through distributor channels, and we also carry matched-grade aftermarket options that meet or exceed the original spec. The choice is yours, and we show you both prices side by side on paper before any order is placed. Call (954) 280-4413 for a free assessment.
If the frame is square, the glass is intact, and the failure is seal or hardware related, repair is almost always the better value, usually 40 to 60 percent less than full replacement. If the frame is racked, water has rotted the rough opening, or the glass is delaminating, replacement is the honest recommendation. We will tell you which one makes sense for your window and your budget.
For a straightforward seal or hardware repair, we can often schedule within the same week and finish in one visit when parts are available locally. Custom-shaped impact glass may take two to four weeks to build. A live person answers the phone 24/7 at (954) 280-4413, so you will know exactly where you stand before you hang up.
Yes. We regularly service CWS units in Fort Lauderdale condo buildings, including high-rise work that requires lift access or compliance with building management rules. We handle the logistics, the permits where needed, and the cleanup. Call (954) 280-4413 with your building name and unit details, and we will tell you how it works.
Contact TruePane Windows & Doors
If your CWS custom or geometric window needs a second opinion or a real fix, call (954) 280-4413. A live person answers, 24 hours a day, 7 days a week. We will schedule the free estimate, put everything in writing, and stand behind the work with the Done Right Promise. Fort Lauderdale homeowners have trusted us since 2008. You can too.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Fort Lauderdale and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.