Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterMr-Glass Window Installation: The Fort Lauderdale Owner’s Guide
If you own Mr-Glass windows in Fort Lauderdale and a unit is failing, we stock and install Mr-Glass-compatible replacement sashes, balances, rollers, and insulated glass units, with most window installation jobs priced between $185 and $640 per opening depending on the part and the frame condition. We carry common Mr-Glass hardware on our trucks, so a single-visit repair is the rule rather than the exception. The way most homeowners find us: a window that suddenly drops an inch when opened, a sash that won’t stay up, or a room that’s ten degrees warmer than the hallway in August and the window seal has finally fogged over.
We’re TruePane Windows & Doors, and we’ve been installing and repairing windows in Fort Lauderdale since 2008. We’re an independent service provider, not affiliated with Mr-Glass, which means we work on the window in front of us, not a corporate script. Dale Kessler founded this company because he kept seeing the same problem: window hardware replaced with the wrong part, a sash that binds six months later, and a homeowner holding a voided warranty. That’s the problem we fix permanently.
Which Mr-Glass Models This Applies To
Mr-Glass windows show up in a wide range of Fort Lauderdale homes, from 1980s single-hung units to mid-2000s horizontal sliders and casement windows. The compatibility gotcha with Mr-Glass specifically is the balance system. Mr-Glass single-hung and double-hung windows from the 1990s and early 2000s used a block-and-tackle balance with a channel width that changed between production runs. A balance that’s off by an eighth of an inch won’t seat correctly, and forcing it damages the sash. We measure the channel before we ever pull a part off the truck.
To identify your Mr-Glass window, look for the manufacturer label on the side of the sash or the top edge of the frame. If the label is gone, the corner construction of the sash and the style of the locking mechanism will narrow it down. For most Mr-Glass windows, we recommend OEM or OEM-equivalent balances and pivots. Aftermarket generic balances are cheaper, but the spring tension is often wrong for the sash weight, and you end up with a window that slams or won’t close. On rollers and weatherstripping, quality aftermarket equivalents hold up fine in Fort Lauderdale’s heat and humidity when the profile matches. On insulated glass units, we always quote both OEM and a quality equivalent so you see exactly what you’re buying and what the warranty covers.
Signs Your Mr-Glass Window Installation Is Failing
- The sash drops when you open it. This is almost always a failed balance, not a broken lock or a warped frame. Mr-Glass balances from the 1990s and 2000s use a spring-and-cord system that fatigues with age and repeated use. The first symptom is a window that slowly sinks three or four inches on its own.
- You have to lift with both hands to open it. On a Mr-Glass slider, this is usually worn rollers that have flattened on one side, causing the sash to drag on the track. On a hung window, it’s a balance that has lost tension. Both are repairable without replacing the whole window.
- Draft or heat coming through a closed window. In Fort Lauderdale, this is often deteriorated weatherstripping or a sash that has settled out of square. It’s not just comfort. A leaky window in a coastal climate pulls humidity into the wall cavity, and that starts a longer-term problem.
- Fog or condensation between the glass panes. The seal on the insulated glass unit has failed. This is a common failure on Mr-Glass units that are fifteen to twenty years old, especially on the south and west elevations where the Florida sun beats on the glass all afternoon. It won’t clear up on its own.
- The window sticks or binds when you close it. This can be a bent pivot bar, a worn shoe, or a track that has worked its way out of alignment. It’s the kind of problem that gets worse every time you force it, and forcing it cracks the sash or snaps the lock.
Replacement Cost & What’s Included
For Mr-Glass window installation in Fort Lauderdale, here’s what you can expect to pay, installed:
- Balance replacement (per window): $145-$225
- Roller replacement (per window): $120-$190
- Weatherstripping replacement (per window): $95-$165
- Insulated glass unit replacement (per window): $285-$525
- Complete sash replacement (per window): $340-$640
Labor is included in every number above. The range depends on the window size, whether the frame needs any correction, and whether you choose OEM or a quality equivalent for the part. We quote the part and the labor separately on paper before we start, so there are no surprise line items. Every window installation is covered by our Done Right Promise: if it’s not done right, we make it right with no paperwork and no arguing. Both warranty layers get registered in writing before our truck leaves your driveway.
DIY or Call Us?
There are a few things an owner can safely check: whether the track is clean and free of debris, whether screws on the lock and handle are snug, whether the weatherstripping is visibly cracked or missing. Those checks are free and take ten minutes.
Where DIY goes wrong on Mr-Glass windows is the balance system. A block-and-tackle balance is under spring tension, and taking one out incorrectly can send a metal part flying. We’ve seen homeowners put the wrong tension balance into a heavy sash and then watch the sash launch when they release it. If the sash is heavy or the balance is loaded, call us. A trained technician with the right replacement part will have the window working in under an hour in most cases. Call (954) 280-4413 and we’ll talk through what you’re seeing.
FAQs
A well-installed Mr-Glass window will give you 15 to 25 years in Fort Lauderdale’s coastal climate, with the heat, humidity, and salt air wearing the weatherstripping and balances faster than inland locations. The glass itself will outlast every other part on the window. The frequent failure points are the moving hardware and the seal on the insulated glass unit, both of which can be replaced without buying a new window.
Yes, in most cases. Balances, rollers, weatherstripping, locks, and even the insulated glass unit itself can all be replaced individually without removing the window frame from the wall. The exceptions are a rotted frame or a sash that has pulled apart at the corners, where replacement is genuinely the better call. We’ll tell you which one you’re facing, and we’ll tell you if a repair isn’t worth the money.
Most Mr-Glass part replacements take forty-five minutes to an hour per window, done in a single visit. A complete sash or insulated glass unit replacement can take one to two hours depending on the size and how the window was originally set. We’ll give you an honest time estimate before we start, and we’ll be there when we say.
We stock common Mr-Glass balances, rollers, and locks on our trucks in Fort Lauderdale. If we need a specific sash or an insulated glass unit cut to size, we order it and typically have it in hand within a week. We’ll tell you which situation you’re in before we schedule the work, so you’re never surprised by a second appointment left hanging.
If you have a Mr-Glass window that’s failing, call (954) 280-4413 and describe what you’re seeing. We’ll give you a straight answer about what it needs and what it’ll cost before we ever schedule a visit. Free estimates mean exactly that, and a live person answers the phone every time you call.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Fort Lauderdale and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.