Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterTherma-Tru Energy-Efficient Windows in Fort Lauderdale: What to Know First
Therma-Tru energy-efficient windows in Fort Lauderdale typically involve replacing failed insulated glass units, upgrading to Low-E coated glass, or swapping worn weatherstripping and glazing on existing Therma-Tru door and window frames. Most jobs we quote run between $400 and $1,900 depending on glass package, frame condition, and whether you’re replacing one sash or a full opening. We’re an independent Therma-Tru service provider, which means we tell you straight whether a repair makes sense or a full replacement is the honest call. If you own a Therma-Tru entry door, sidelight, or transom and your electric bill creeps up every July, call (954) 280-4413 and we’ll put eyes on it.
How Therma-Tru Products Fail - and How We Fix Them
Therma-Tru builds a solid door, but South Florida humidity finds the weak points in any insulated glass assembly. Here’s what we see on service calls across Fort Lauderdale.
- Fogged glass on Classic-Craft and Fiber-Classic sidelights. Therma-Tru’s fiberglass door systems hold up well against rot, but the sealed glass units in sidelights and transoms are the first casualty of salt air and constant UV. We’ve pulled units from homes in Victoria Park and Rio Vista where the desiccant inside the spacer was saturated. The fix is a new insulated glass unit with fresh Low-E coating and argon fill, set into the existing fiberglass frame with new glazing tape.
- Failed thermal seals on Smooth-Star door glass inserts. Smooth-Star doors from the late 1990s and early 2000s used a thinner IG unit than what Therma-Tru specs today. When the seal fails, you get that hazy film between the panes you can’t wipe off. No amount of cleaning fixes it. We order replacement IG units sized to the exact insert and set them with the correct setting blocks so the weight doesn’t sit on the seal.
- Warped or compressed weatherstripping on Therma-Tru door bottoms. The door sweep and threshold seal on a Therma-Tru entry system take a beating from Fort Lauderdale’s afternoon downpours and relentless sun. When the sweep compresses, conditioned air pours out and hot air comes in. We replace the OEM sweep with a commercial-grade equivalent that holds its shape longer in heat, and we adjust the threshold for a true seal.
- Condensation between Therma-Tru double-pane sliders. Fort Lauderdale homes with older Therma-Tru sliding patio assemblies see interior condensation that signals a blown seal. Dale Kessler has a saying for this: “If it is not right on paper, it will not be right on the wall.” He means that the replacement unit has to be ordered to the exact glass-to-glass dimensions recorded on site, not pulled from a catalog. We measure twice, call the glass fabricator once, and the unit drops in square.
- Fading and heat gain through non-Low-E Therma-Tru glass. Some Therma-Tru door glass ordered a decade ago shipped with clear annealed glass and no Low-E coating. In a south- or west-facing Fort Lauderdale entry, that glass acts like a solar oven. We swap the old insert for an ENERGY STAR-rated Low-E unit with argon gas, and the temperature difference inside the door is noticeable the same afternoon.
Our Therma-Tru Energy-Efficient Windows Process
This is how a Therma-Tru energy-efficient window job goes with our crew.
- 1
Call and talk to a live person. No voicemail tree, no call center. You reach someone at our shop, day or night, and we schedule a time that works.
- 2
We measure the opening and the existing glass unit. Every opening gets measured twice. The old glass gets inspected for seal failure, spacer type, and frame condition. We write it down.
- 3
We quote OEM and quality aftermarket side by side on paper. For Therma-Tru inserts, we show you the cost of a factory-spec replacement unit versus a fabricated Low-E unit with better energy ratings. You see exactly what you’re buying before you commit.
- 4
We order the glass and set the date. Most Therma-Tru IG replacements are fabricated and installed within a week, not a month.
- 5
Installation, cleanup, and a true test. Our uniformed, background-checked techs set the unit, re-glaze, re-weatherstrip if needed, and clean the glass. Then we check the seal under direct light and make sure the door or window operates the way it should.
- 6
Warranty registration before we leave your driveway. Both warranty layers, manufacturer and workmanship, get registered in writing. You get the paperwork that day. That’s The Keystone Standard, and it’s non-negotiable.
What Therma-Tru Energy-Efficient Windows Costs in Fort Lauderdale
We quote every job in writing before we start, and the number on the estimate is the number on the bill. Here are the common Therma-Tru scenarios we price in Fort Lauderdale.
| Job | Typical Range |
|---|---|
| Replace one fogged IG unit in a Therma-Tru sidelight | $400 - $700 |
| Replace a Therma-Tru door glass insert with Low-E + argon | $600 - $1,200 |
| Full transom glass replacement, Low-E upgrade | $700 - $1,300 |
| Therma-Tru sliding patio door glass upgrade (both panels) | $1,200 - $1,900 |
| Weatherstripping and threshold seal replacement on a Therma-Tru entry door | $150 - $350 |
What moves the price: glass package (standard Low-E versus high-performance tinted), opening size, whether the frame needs re-glazing or carpentry work, and access. Nobody can price a Therma-Tru glass job over the phone accurately, and anyone who does is guessing. Call (954) 280-4413 and we’ll measure it and put a written number in your hand.
Why Fort Lauderdale Homeowners Call TruePane Windows & Doors for Therma-Tru Work
We’ve been serving Fort Lauderdale and South Florida since 2008, and Dale Kessler founded TruePane Windows & Doors in 2008 on one rule: if the pane is not true, the job is not done. That rule governs every Therma-Tru insert we set, and it’s why we back every job with the Done Right Promise. If it isn’t right, we make it right, no paperwork fights and no arguing. We’re an authorized installer for more than a dozen manufacturer lines, including PGT, CGI, CWS, and ES Windows, so when a Therma-Tru repair leads to a bigger conversation about replacement windows, we can quote you side by side and let you decide. A live person answers our phone 24/7, and our techs are background-checked, uniformed, and trained to work in your home the way they’d work in their own mother’s. We register both warranty layers before the truck leaves your driveway. That’s the square deal, and we stand behind it.
FAQs
Yes, in the vast majority of cases we replace the insulated glass unit and re-use the existing fiberglass or steel frame, as long as the frame is structurally sound. That’s the point of fixing Therma-Tru rather than replacing it. Call (954) 280-4413 and we’ll tell you honestly which one makes sense for your door.
As an independent Therma-Tru service provider, we never claim to speak for Therma-Tru’s warranty department. What we do is document the work properly, use correctly sized IG units, and register the glass manufacturer’s warranty in writing so you have paperwork for any future claim. If your original door is still under Therma-Tru warranty, we’ll flag that before any work begins.
Most sidelight and transom glass replacements are completed in a single visit of two to three hours once the fabricated glass unit is in hand. The glass fabrication typically takes three to five business days after we measure and order.
That fogging means the seal on your insulated glass unit has failed, and the damp Fort Lauderdale air is working its way between the panes. It’s not a cleaning problem and it won’t get better on its own. The fix is a new IG unit, and we quote those for free.
Yes. We come out, measure, inspect, and hand you a written estimate with the exact cost, and it costs you nothing. Call (954) 280-4413 and we’ll set a time.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Fort Lauderdale and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.