Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterViewLux Custom & Geometric Windows in Fort Lauderdale: What to Know First
ViewLux custom and geometric windows in Fort Lauderdale typically run from $1,800 to $9,400 per unit depending on shape complexity, glass package, and impact rating, with most custom jobs completed in two to four weeks from template to install. As an independent ViewLux service provider, TruePane Windows & Doors handles measurement, sourcing, and installation for arched, radius, trapezoid, and fully bespoke ViewLux openings across Broward County without the markup of going back through the original builder. We register both warranty layers in writing and stand behind the work for 90 days with no fine print.
This page is written for ViewLux owners in Fort Lauderdale who need a shaped window replaced or a custom opening built right, not for tire-kickers comparing vinyl stock numbers. If you already know the opening is out of square or the glass is fogged and you want a straight answer on cost and timeline, call (954) 280-4413 and talk to a live person.
How ViewLux Products Fail - and How We Fix Them
ViewLux builds a solid extruded aluminum frame, but Fort Lauderdale’s salt air, humidity, and hurricane cycle find the weak points in any shaped unit. Here’s what we see most often on custom and geometric ViewLux windows in this city:
- Radius and arch units lose seal at the curved glass transition. The ViewLux radius series relies on a bent-glass lamination bedded in a flexible glazing channel. After eight to ten years of Fort Lauderdale sun loading, that channel cures brittle and micro-separates from the frame. The window looks fogged, but the real failure is the channel, not the insulated glass unit. We re-bed and reseal rather than quoting a full glass pack replacement when the IGU itself tests sound.
- Trapezoid and parallelogram units rack at the corner keys. Geometric windows carry wind load unevenly. On ViewLux trapezoid units, the corner keys take the brunt of it, and we see hairline frame separation at the narrowest angle after storm seasons. The fix is disassembly, key replacement, and re-square before the glass goes back in. If it is not right on paper, it will not be right on the wall.
- Weep system clogging on custom bottom-tilt sashes. ViewLux’s custom tilt-turn and bottom-hinged units route water through narrow weep slots in the sill extrusion. Fort Lauderdale’s combination of wind-driven rain and airborne salt crust plugs those slots faster than the manufacturer’s cleaning guides suggest. Owners see interior water staining and assume a failed install. Usually it’s a ten-minute weep clearing and a re-angled sill flush. We check this before quoting any glass replacement.
- Oversized picture units bow under their own weight. ViewLux makes a wide-span picture line that shows up in custom living room openings. Over 60 inches, the horizontal mullion can deflect enough to bind an adjoining operable unit. We shim, re-mull, and re-align the operating sash so it closes without shoulder pressure, which also takes strain off the lock hardware.
- Obsolete finish matching on older ViewLux bronze and champagne profiles. If your ViewLux windows were installed before the company shifted finish lines, matching a single replacement unit to the existing bronze anodizing is genuinely difficult. We order raw mill finish and have it matched at a local Fort Lauderdale anodizer rather than installing a close-enough factory color that reads wrong in daylight.
Our ViewLux Custom & Geometric Windows Process
Here’s how a ViewLux custom or geometric window job runs with us, start to finish:
- 1
Call and talk to a live person. You reach a dispatcher at (954) 280-4413, not a voicemail tree. We ask about the window’s location, age, shape, and what it’s doing. That call determines whether we send a glass specialist or a full framing crew.
- 2
On-site diagnosis. A background-checked, uniformed technician measures the opening twice, documents the existing ViewLux frame condition with photos, and checks for the specific failure patterns listed above. We tell you on the spot whether this is a repair or a replacement.
- 3
Parts decision, in plain language. For service work, we offer OEM ViewLux components and quality aftermarket parts when the distinction matters. If aftermarket glass meets or exceeds the original spec and cuts two weeks off lead time, we say so. If it doesn’t, we don’t install it. Either way, you see both options on paper with real prices.
- 4
Template and order. For custom and geometric units, we template the exact opening, not just the nominal measurements. A radius that’s off by three-eighths of an inch means a reorder and a boarded-up opening. We don’t rush this step.
- 5
Install and test. We set the unit, level and square it, seal the perimeter with the right backer and sealant for Fort Lauderdale’s humidity cycle, and run water and pressure tests appropriate to the opening. Then we walk you through operation and leave the workspace clean.
- 6
Warranty registration before we leave. Both manufacturer warranty layers get registered in writing, with durations stated, before the truck pulls out of your driveway. Then the Done Right Promise starts.
What ViewLux Custom & Geometric Windows Costs in Fort Lauderdale
Custom and geometric work is priced per opening, and shape drives cost more than size. Here’s what Fort Lauderdale ViewLux owners can expect:
- Service call and diagnosis: $90 to $145, applied toward repair if you proceed.
- Seal replacement on a radius or arch unit: $340 to $780, depending on curve complexity and glass pack condition.
- Full custom trapezoid or parallelogram replacement with impact glass: $2,300 to $5,700 per unit.
- Oversized arched picture unit, impact-rated: $3,600 to $9,400 depending on span and finish matching.
- Corner key repair with re-square on geometric units: $280 to $520 per frame.
What moves the price: whether the unit is impact-rated, whether finish matching requires local anodizing, and whether the existing frame can be salvaged. We give you a written line-item quote before work starts, and the price on that quote is the price on the bill. Call (954) 280-4413 for an exact number on your opening. Estimates are free.
Why Fort Lauderdale Homeowners Call TruePane Windows & Doors for ViewLux Work
We’ve been in this trade since 2008, and Dale Kessler founded TruePane in 2008 out of a simple frustration: too many South Florida window jobs were being installed out of true, with warranties that quietly voided themselves when the homeowner needed them. That’s why every job carries the Keystone Standard: both manufacturer warranty layers registered in writing before we leave, and a Done Right Promise that says if it’s not right, we make it right. No paperwork fights, no arguing.
We’re not the cheapest bid in Fort Lauderdale, and we don’t try to be. We’re the company you call when the shaped window over the front door has to be right the first time. Our techs work on ViewLux regularly, and when a full replacement makes more sense, we quote PGT, CGI, CWS, and ES Windows side by side on paper so you see exactly what you’re buying. A square deal, every time.
FAQs
Yes, in most cases. Fogging on ViewLux shaped units often comes from the glazing channel failing, not the insulated glass itself. If the IGU still tests sound, we re-bed and reseal the glass for $340 to $780 instead of quoting a full custom replacement. Call (954) 280-4413 and we’ll diagnose it before recommending anything.
No. Manufacturer warranties cover materials, and your right to choose who installs or services those materials is protected. As an independent ViewLux service provider, we register both warranty layers in writing and state the durations so you never have to guess whether you’re covered.
Most custom and geometric ViewLux units take two to four weeks from template to install, depending on glass package and finish matching. Templating adds a few days up front, but it prevents the three-week mistake of ordering a unit that doesn’t fit the actual opening.
Yes, but we do it correctly rather than quickly. Older ViewLux bronze and champagne finishes are often discontinued, so we order mill finish material and have it matched at a local Fort Lauderdale anodizer. It takes a few extra days and costs a bit more, but the new unit won’t look wrong against the old ones.
We handle single openings. Plenty of Fort Lauderdale homes have one arched ViewLux window over the door or one trapezoid in a family room, and most of those jobs are completed in a single visit. You get the same Keystone Standard on one window that you’d get on thirty. Call (954) 280-4413 for a free estimate on yours.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Fort Lauderdale and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.