Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterHorizontal Roller & Sliding Windows in Fort Lauderdale, FL | TruePane Windows & Doors
Horizontal roller and sliding windows are one of the most practical impact-rated openings you can put in a Fort Lauderdale home. They glide side to side on a reinforced track instead of swinging out, which means they work beautifully over kitchen counters, walkways, and patios where a casement or awning window would get in the way. TruePane Windows & Doors installs this profile across our PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass lines, so you get the configuration and finish that actually fits your house rather than whatever happens to be in stock. We measure, order, and install to Florida Building Code High-Velocity Hurricane Zone standards. Call (954) 280-4413 to talk through your opening sizes and get a written quote.
Product Overview - Horizontal Roller & Sliding Windows
In South Florida, a window earns its keep by doing two things at once: letting you live comfortably most of the year, and holding the building envelope together when a storm rolls in from the Atlantic. The horizontal roller and sliding window is our workhorse impact profile for exactly that reason. Laminated impact glass tested to withstand 140-mph winds and 9,500 lbs of wind-borne debris impact sits inside an aluminum or vinyl frame that glides horizontally on a reinforced track. No cranks to strip, no hinges to sag. Just a clean, linear operation that holds up to salt air, humidity, and daily use.
Architecturally, this window suits the long, low sightlines you see across Fort Lauderdale neighborhoods: mid-century ranches in Sailboat Bend, newer construction in Victoria Park, canal-front homes in Rio Vista, and high-rise condos along the Galt Ocean Mile. Because the sash weight is carried by the track rather than a hinge, larger openings stay operable without the strain you’d get from a projecting window. That makes this profile a strong choice for wide living-room openings, bedrooms that face the water, and any room where you want ventilation without sacrificing floor or wall space.
What separates a well-installed slider from a leaky, sticky one is how the frame is set and sealed. TruePane Windows & Doors treats every opening as a structural opening, not a trim job. We install level, plumb, and square, seal the perimeter with AAMA 812 low-expansion foam, and follow AAMA 2400/2410 installation practice so the NOA-rated assembly performs the way it was tested.
Technical Specifications
Frame Materials
- Aluminum: Slimmer sightlines, excellent strength for larger openings, available in a range of finishes
- Vinyl: Thermal efficiency, low maintenance, and a clean look for residential projects
Track Configurations
- 2-Track: One fixed panel, one sliding panel
- 3-Track: Two sliding panels plus a fixed panel, for wider openings with more ventilation area
Glass Options
- Laminated Impact Glass (PVB Interlayer)
- Low-E Insulated Glass
- Tinted Glass
- Clear Glass
Finish Options
- White
- Almond
- Bronze
- Black
- Tan
Screen Options
- Retractable Screen
- Sliding Screen
Hurricane & Compliance Performance
Laminated Impact Glass. Two panes of glass are bonded to a PVB (polyvinyl butyral) interlayer. Under a large-missile impact, the glass may crack but it stays in the frame as a single sheet, keeping wind, rain, and debris outside where they belong.
Miami-Dade NOA / Florida Product Approval. Each configuration carries a Miami-Dade Notice of Acceptance and a Florida Product Approval number. These are issued per configuration, so we verify the exact numbers on your specific quote before anything is ordered.
FBC/HVHZ Compliance. The system is engineered to Florida Building Code High-Velocity Hurricane Zone requirements, which govern the stricter coastal building practices used throughout Broward County and Fort Lauderdale.
TAS 201/202/203 Testing Context. HVHZ-rated products are tested under the TAS protocol family. TAS 201 covers large-missile impact, TAS 202 covers cyclic wind-pressure loading, and TAS 203 covers forced-entry resistance. This window profile is built for that testing environment.
Design Pressure for Your Wind Zone. Design pressures are matched to your wind zone, up to +/-100, and never higher. We don’t sell you a higher DP rating than your opening actually needs; you get the right product for where your house sits.
Energy Performance. Low-E and insulated glass options are available for homes that want impact protection plus better thermal and UV performance. Clear and tinted glass round out the line for different exposures and privacy needs.
Color & Glass Options
Finish selection in Fort Lauderdale tends to split along architectural lines. White and almond frames read as classic Florida and disappear into stucco walls. Bronze and tan suit the Mediterranean and Spanish-influenced homes you see throughout Coral Ridge and Colee Hammock. Black frames have become the go-to for modern builds and renovations, especially in neighborhoods like Progresso Village and Flagler Village where contrast trim is part of the design language. Aluminum frames take all five finishes cleanly; vinyl tends to look best in white and almond.
On the glass side, laminated impact glass is the structural core of this product. From there, Low-E insulated glass is the smart pick for east- and west-facing openings that take direct sun, reducing heat gain while keeping the view clear. Tinted glass helps cut glare on canal-front and ocean-facing elevations. Clear glass is the right call when you want maximum visible light and no color shift. We’ll help you match the glass package to the room, the exposure, and how you actually live in the space.
Installation by TruePane Windows & Doors in Fort Lauderdale
An impact window is only as good as its installation. The NOA and Florida Product Approval ratings assume the window is installed correctly: level, plumb, square, and sealed. If an installer rushes the rough opening, shims it sloppily, or skips the perimeter seal, the assembly can’t perform the way it was tested. That’s the difference between a window that passes a permit inspection and one that actually holds in a storm.
Our Fort Lauderdale installation process starts with a pre-install inspection of the rough opening. We check the framing for rot, especially on older coastal homes where water intrusion has had time to do damage. We verify the opening dimensions against the product’s approved size range and confirm the design pressure matches the wind zone for that specific location in Fort Lauderdale. Then we set the frame level, plumb, and square, anchor it per the manufacturer’s approved method, and seal the perimeter with AAMA 812 low-expansion foam before installing the sash.
We install to AAMA 2400/2410 practice, which means flashing, sealing, and drainage are handled correctly rather than cosmetically. After the system is in, we run a water test on the opening to confirm the seal. Cleanup happens the same day. And because HVHZ jurisdictions in Broward County require product approval documentation as part of the permit submittal, we provide the NOA and Florida Product Approval numbers tied to your exact configuration so your permit package moves without delay.
Coastal exposure matters in Fort Lauderdale. Homes within a few blocks of the Intracoastal or the ocean are often in a higher wind zone, which changes the required design pressure. We check the address against the current wind zone map before we quote, so the window you buy is the window your permit requires. No guessing, no overselling.
Frequently Asked Questions - Horizontal Roller & Sliding Windows
Design pressures are matched to your specific wind zone, up to +/-100, and never higher. The correct DP rating depends on where your Fort Lauderdale home sits relative to the coast, so we verify the wind zone for your address before quoting. Call (954) 280-4413 and we’ll pull the right configuration for your opening.
Lead time varies by manufacturer line, glass package, and frame finish. Standard configurations across our PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass lines typically run several weeks, but custom sizes or less common finishes can extend that. We give you a written lead time on your quote so you can plan the renovation around it. Call (954) 280-4413 for current timelines.
Yes. High-Velocity Hurricane Zone jurisdictions in Broward County require product approval documentation as part of the permit package. Each configuration carries a Miami-Dade NOA and Florida Product Approval number, issued per configuration. We provide the exact numbers for your specific window on your quote, so your permit submittal is accurate. Call (954) 280-4413 to get the details for your opening.
Yes, within the approved size ranges for each frame material and track configuration. You choose 2-track or 3-track, aluminum or vinyl, your glass package, your finish color, and your screen option. The dimensions are built to your rough opening measurements. Large or unusual sizes may fall outside the tested range for certain configurations, so we confirm approval before ordering. Call (954) 280-4413 to go over your opening sizes.
Keep the bottom track clear of sand, salt, and debris, especially on coastal Fort Lauderdale homes where wind blows grit onto sills. Vacuum the track regularly and wipe the frame with mild soap and water. Avoid abrasive cleaners on the glass and frame finishes. If the sash ever feels stiff or the rollers wear, get it serviced before forcing it; forcing a misaligned sash can damage the track. Call (954) 280-4413 if you need a service visit.
Get a Quote - Horizontal Roller & Sliding Windows in Fort Lauderdale
Ready to price Horizontal Roller & Sliding Windows for your Fort Lauderdale home? We’ll measure your openings, verify your wind zone, and put together a written quote with the exact NOA and Florida Product Approval numbers for your configuration. Call TruePane Windows & Doors at (954) 280-4413 to schedule your free on-site measurement and get the project started.
Written by the team at TruePane Windows & Doors, serving Fort Lauderdale since our founding with hurricane-impact windows and doors installed to Florida Building Code High-Velocity Hurricane Zone standards.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other TruePane Windows & Doors Services
What Neighbors Say About TruePane Windows & Doors
Detailed Images
