Awning Windows

Awning Windows in Fort Lauderdale, FL | TruePane Windows & Doors

Awning windows are top-hinged, crank-out windows that open outward from the bottom, letting you keep fresh air moving even during a passing Florida rain shower. For Fort Lauderdale homeowners, that’s more than a convenience, it’s a daily reality from June through October. TruePane Windows & Doors supplies and installs impact-rated awning windows across Broward County, with laminated glass engineered to take a hurricane-borne hit and stay in the frame. Whether you’re replacing original 1970s single-pane units in Victoria Park or finishing new construction in Rio Vista, we pull the right permits, set every window level and square, and stand behind the work. Call (954) 280-4413 to talk about your project.

Call (954) 280-4413

Product Overview - Awning Windows

An awning window hinges at the top and cranks outward from the bottom, which creates a sloped glass surface that sheds rainwater while the sash is open. That geometry matters in Fort Lauderdale, where a 20-minute afternoon downpour can appear out of nowhere. You can leave an awning window cracked open during light rain and keep the room ventilated without water pooling on the sill.

These windows earn their keep in specific architectural spots. You’ll find them over kitchen sinks, in bathrooms, in stairwells, and on shorter walls where a tall casement or sliding window doesn’t make sense. In mid-century and ranch homes across neighborhoods like Coral Ridge and Imperial Point, awning windows often run in horizontal bands high on the wall, which works beautifully with our slimline aluminum and vinyl frames.

What separates an impact-rated awning window from a standard one is the glass package and the frame engineering behind it. The sash carries laminated impact glass with a PVB interlayer that holds the pane together if something strikes it. The frame, hinges, and locking hardware are built to keep that sash connected to the building under repeated wind-pressure cycling, not just on a calm showroom day. TruePane Windows & Doors installs this product across our PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass lines, which means we can match the right engineering and finish to the wind zone your Fort Lauderdale address actually sits in.

Technical Specifications

Awning windows from TruePane Windows & Doors come in configurations sized for residential openings throughout Fort Lauderdale. Here’s what you can specify:

• Frame materials: Aluminum or vinyl. Aluminum offers a narrow sightline and comes powder-coated; vinyl provides high thermal resistance and a lower maintenance profile in coastal salt air.
• Glass options: Laminated impact glass with PVB interlayer, Low-E insulated glass, tinted glass, or clear glass. Impact-rated packages combine laminated glass with the glazing option that suits your exposure.
• Finish options: White, Almond, Bronze, Black, and Tan. These are paint-grade finishes selected to hold color under South Florida UV without chalky fading.
• Screen options: Fixed screen or retractable screen. Fixed screens sit on the interior side; retractables roll out of the way when you want an unobstructed view.
• Operation: Smooth crank or handle operation with multi-point locking hardware. The sash closes tight against the weatherstrip for a positive air seal.
• Sill design: Sloped, weathertight sill profiles that direct water away from the interior even during wind-driven rain.

Hurricane & Compliance Performance

Every awning window we sell in Fort Lauderdale is specified to meet the Florida Building Code for the High-Velocity Hurricane Zone. Here’s a breakdown of what that actually means for the product.

• Laminated Impact Glass - The glass package uses a PVB (polyvinyl butyral) interlayer sandwiched between panes. When debris strikes, the glass cracks but the interlayer holds the fragments in place, keeping wind and rain out of the opening. That one piece of engineering is the difference between a broken window and a breached building envelope.
• Miami-Dade NOA / Florida Product Approval - Each awning window configuration carries a Miami-Dade Notice of Acceptance and Florida Product Approval number issued for that specific size and glass package. We verify the exact NOA number on your quote, because a product approval for one configuration doesn’t automatically cover another.
• FBC / HVHZ Compliance - These windows are engineered to Florida Building Code High-Velocity Hurricane Zone requirements. That’s the stricter codebook that applies to Fort Lauderdale and the rest of Broward County, and it governs everything from glass retention to anchorage.
• TAS 201 / 202 / 203 Testing Context - HVHZ-rated products are tested under this protocol family. TAS 201 is the large-missile impact test, TAS 202 covers cyclic wind-pressure loading (the repeated push-pull that simulates a hurricane’s gusts), and TAS 203 addresses forced-entry resistance. Ask us which test reports apply to your specific configuration and we’ll pull them.
• Design Pressure for Your Wind Zone - We don’t oversell ratings. Design pressures are matched to your wind zone, up to +/‑100, never higher than the opening actually requires. Specifying a window with a higher DP than your zone demands adds cost without adding safety. We size it correctly.
• Energy Performance - Low-E and insulated glass options are available for awning windows facing direct sun in Fort Lauderdale. Low-E coatings cut solar heat gain through east and west exposures, and insulated packages help manage heat transfer in rooms you condition year-round.

Color & Glass Options

Fort Lauderdale homes lean hard toward coastal and Mediterranean architectural styles, and your finish choice should follow that direction. White and Almond are the most common on stucco exteriors from Las Olas to Middle River Terrace, they read clean and disappear into a light colored facade. Bronze and Black finishes give you a modern contrast that holds its own on contemporary builds and darker trim lines we’re seeing in new construction off Federal Highway. Tan works especially well on ranch and villa style exteriors where beige and sand tones dominate.

On glass, laminated impact glass is the non-negotiable baseline in Fort Lauderdale. From there, clear glass keeps views pure, tinted glass knocks down glare and heat gain, and Low-E insulated glass adds a layer of thermal performance for rooms with heavy sun exposure. If sound matters, which it often does for homes near Dixie Highway or the FLL flight path, ask us about insulated configurations.

Installation by TruePane Windows & Doors in Fort Lauderdale

An awning window only performs to its NOA rating if it’s installed the way the approval assumes it will be. We’ve replaced enough badly flashed windows across Fort Lauderdale to know that installation is where most failures start. Here’s how our process runs.

We begin with a pre-install inspection of the opening. We check the rough opening dimensions against the approved product size, inspect the surrounding framing for rot or termite damage, especially in older wood-framed homes in neighborhoods like Poinsettia Heights, and verify the substrate can actually receive the specified anchors. If something looks compromised, we tell you before we set a single screw.

Every awning window goes in level, plumb, and square, with shims placed only where the manufacturer’s installation details call for them. We apply AAMA 812 low-expansion foam around the perimeter to seal the gap, then follow AAMA 2400/2410 standard practice for flashing and integration with the existing weather barrier. In Fort Lauderdale’s coastal exposure zones, that perimeter seal and flashing sequence is what keeps wind-driven rain out of your wall cavity during a storm. Once the window is set, we run a water test on the installation and walk you through crank operation before cleanup.

Permitting in HVHZ jurisdictions like Fort Lauderdale requires approved product submittals, and we handle that as part of the job. Removing original windows and installing non-impact units in an HVHZ zone will fail inspection. We pull the correct permit package and submit the NOA documentation your specific configuration carries.

Call (954) 280-4413 to schedule your free on-site measurement.

Frequently Asked Questions - Awning Windows

What wind zone / design pressure is the awning window rated for?
Design pressure is matched to the wind zone your Fort Lauderdale address falls under, up to +/‑100, never higher. We calculate the required DP from your specific opening size and exposure category. Call (954) 280-4413 for the exact rating on your quote.

What is the lead time for awning windows?
Most awning window orders ship in 4 to 8 weeks from final approval depending on the manufacturer line, finish, and glass package. Custom sizes and less common finishes can run longer. We confirm a realistic delivery window when you place the order, and we don’t schedule tear-out until product is in hand. Call (954) 280-4413 to check current lead times for your configuration.

Does an awning window require a Miami-Dade NOA or Florida Product Approval submittal for my permit?
Yes. In Fort Lauderdale and throughout Broward County, your permit package must include the product approval documentation for the exact window configuration being installed. We pull the correct NOA or Florida Product Approval number for your sizes and glass package and submit it with your permit. Call (954) 280-4413 and we’ll verify approval numbers on your quote.

Can I customize the size or configuration of my awning windows?
Yes, within the approved size ranges for the impact rating. We can configure single units, horizontal bands of multiple awning windows, composite units with fixed picture windows above or below, and custom glass and finish combinations. Every configuration must fall within a tested and approved size range. Call (954) 280-4413 with your rough opening dimensions.

How do I maintain the frame and hardware?
Wash frames with mild soap and water, and rinse salt spray off coastal-facing aluminum frames every few months. Keep the crank mechanism clean and lightly lubricated once a year, and clear debris from the sill weep holes so water drains. An annual check of weatherstripping keeps the air seal tight. Call (954) 280-4413 if a crank starts feeling stiff and we’ll service it.

Get a Quote - Awning Windows in Fort Lauderdale

If you’re pricing awning windows for a Fort Lauderdale home, let’s measure the actual openings and quote the right configuration for your wind zone. We’ll walk you through glass, finish, screen, and approval documentation. Call (954) 280-4413 to schedule your free on-site measurement and get a written line-item quote.

Written by the team at TruePane Windows & Doors, serving Fort Lauderdale, FL.