Impact Windows & Doors in Delray Beach - Free In-Home Measure, Written Price

Fast, Reliable Impact Windows & Doors Across Delray Beach

Impact windows and doors in Delray Beach have to meet Palm Beach County’s coastal High-Wind Zone code, and most of the work we do in this city happens in 55+ condo communities where the HOA approval comes before the permit. We know that sequence because we run it weekly across Kings Point, Century Village, and the A1A corridor. A compliant impact window installation here typically runs $85-$150 per square foot for the full frame replacement, depending on product line and opening size. If you need a straight answer on what your building requires, call (954) 280-4413 and we’ll walk you through it.

Call (954) 280-4413

TruePane has been setting impact-rated glass in Delray Beach long enough to know which product lines sail through architectural committee review and which ones stall. That matters when a board meeting is two weeks out and your windows are already fogged. We are a local company with a live person answering the phone at all hours, and our technicians work in Delray Beach homes every day. No call center. No callback form. You call, a person picks up, and we schedule the measurement.

Why TruePane Windows & Doors Is Delray Beach’s Preferred Impact Windows & Doors Company

Delray Beach homeowners stay put. Many have lived in the same Kings Point or Century Village unit for twenty or thirty years, and they remember contractors who promised one thing and installed another. Our reputation here is built on written quotes, registered warranties, and installs that pass the HOA walkthrough the first time. When a Delray Beach customer asks if we’ll be there when we say, the answer is yes, and it has been since 2008 of community service.

We put our work in Delray Beach under a Done Right Promise. If something is not right, we fix it without paperwork fights. That promise sits on top of The Keystone Standard: both manufacturer warranty layers registered in writing before our truck leaves your driveway. You get the durations stated, in writing, on paper. Dale Kessler founded TruePane on a rule that still governs every install: if the pane is not true, the job is not done.

Our technicians are background-checked and uniformed. They measure every opening twice. They quote manufacturer lines side by side on paper so you see exactly what you are buying, from PGT to CGI to Ply Gem. And they know Delray Beach’s buildings. They know what a 1970s bronze anodized frame looks like and what the architectural committee is going to ask before we even submit the package.

Our Impact Windows & Doors Services in Delray Beach

Hurricane Impact Windows

We replace original single-pane aluminum and jalousie windows with impact-rated systems that meet Florida Product Approval and Palm Beach County’s coastal High-Wind Zone requirements. In Delray Beach’s 55+ communities, the most common job is swapping failed 1970s jalousies for impact-rated double-hungs or casements that match the building’s original sightlines. We handle the HOA architectural package and the Palm Beach County permit in the correct order, so the board reviews before the county does.

Impact Sliding Glass Doors

West-facing sliders in inland Delray Beach condo communities take years of afternoon salt air, and we replace them with impact-rated sliders that carry the design pressure rating your building requires. The salt exposure only 3 to 5 miles from the ocean means we favor aluminum frames with a high-quality anodized or powder-coat finish over mill finish that oxidizes fast. Every install includes registration of both warranty layers before we leave.

Impact Entry & French Doors

Entry doors on Delray Beach condo units and single-family homes have to hold the same wind-load rating as the windows. We install impact-rated entry and French doors that meet code and sit square in openings that have shifted over 30 or 40 years. A door that binds in July usually means the original frame was never set true. We fix that.

Impact Garage Doors

Garage doors are the most common breach point in a hurricane, and in Delray Beach’s concrete block stucco homes, a failed garage door can pressure the roof off. We install impact-rated garage door systems with the bracing and track reinforcement Palm Beach County requires. The permit and inspection are part of the job.

Trusted Brands We Service in Delray Beach

We are an authorized installer for more than a dozen manufacturer lines, and in Delray Beach we work most often with PGT, CGI, and Ply Gem product lines because they carry Florida Product Approval and clear design pressure ratings that satisfy the county’s High-Wind Zone requirements. We quote those lines side by side on paper so you can compare glass packages, frame finishes, and warranty durations without a sales pitch. When a Kings Point board asks for a specific SDL grid or bronze frame profile, we can tell you which lines offer it and which do not before anyone orders product. That is the difference between an install that gets approved and one that gets torn out.

Common Impact Windows & Doors Problems We See in Delray Beach Homes

• Fogged jalousie and aluminum sliders in Kings Point and Century Village: The original 1970s and 80s windows in these communities use single-pane glass or failed-edge-seal insulated units that fog permanently. Salt air 3 to 5 miles inland from the Atlantic accelerates seal failure on west-facing openings, and once the seal goes, the glass cannot be repaired. It gets replaced with impact-rated, low-E argon-filled units that cut solar heat gain too.
• HOA architectural rejection after the permit was pulled: We see this every few months: a homeowner hires a contractor who orders product and pulls the Palm Beach County permit, then the condo board rejects the frame color or grid pattern because they never approved it in writing first. The homeowner eats the removal cost. In Delray Beach, the two-track approval is non-negotiable. HOA first, county second, product third.
• Salt-air oxidation on west-facing sliders and entry frames: Inland Delray Beach is close enough to the Atlantic that airborne salt reaches the 55+ communities without much barrier. Mill-finish aluminum frames and cheap powder coats pit and flake within a few years. We see it most on west-facing sliders that get the afternoon sun and the prevailing onshore wind together.
• Non-compliant products sold as Delray Beach-ready: Some lower-cost impact windows carry Florida Product Approval but are not rated for Palm Beach County’s coastal High-Wind Zone. They are legal in Orlando and Tampa but will not pass a Delray Beach inspection. We make sure your quote lists the design pressure rating, not just the product name.

Pricing for Impact Windows & Doors in Delray Beach, FL

We Also Serve Cities Near Delray Beach

Our crews work throughout southern Palm Beach County. We serve Delray Beach every day and regularly take jobs in Boynton Beach, Boca Raton, Deerfield Beach, and Greenacres. If you’re in one of those cities and dealing with the same HOA-plus-county approval process, call (954) 280-4413 and we’ll schedule a measurement. Our main Impact Windows & Doors page covers all the product and warranty details in one place.

FAQs - Impact Windows & Doors in Delray Beach

The HOA-Plus-County Sequence in Delray Beach: What You’re Actually Paying For

Delray Beach’s 55+ condo communities run a two-track approval process that does not exist in neighboring Boca Raton or Boynton Beach. The architectural committee has to sign off on frame color, grid pattern, and product specifications before Palm Beach County will even accept the permit application. That means a real Delray Beach impact window quote includes the time to prepare the architectural submittal, the board meeting wait, the county permit, the product order, the install, the county inspection, and the warranty registration. A cheap quote from a company that skips the HOA step is not cheap. It is a bet that the board will not enforce its own rules, and in Kings Point and Century Village, they enforce them.

We know this because we run the sequence constantly. In Kings Point, we replaced a row of 1970s bronze anodized aluminum jalousie windows with impact-rated ViewLux double-hungs after the architectural committee required an exact match to the original frame profile and SDL grid pattern. The original windows had seal failure, fog between panes, so we swapped them for low-E glass with argon fill, cutting solar heat gain without changing the building’s visual character. The committee walked the unit with the approval package in hand and signed off the same day. That is how the sequence is supposed to work.

Wind mitigation and code compliance are not paperwork we hand you as a courtesy. They are the point of the job. A compliant Delray Beach install includes the design pressure rating on your quote, the Florida Product Approval numbers for every product line we propose, the county permit pulled after HOA approval, the inspection scheduled, and the wind mitigation report that documents every opening. When your insurer asks for proof after a storm, you have it. When you sell the unit, the buyer’s inspector can verify it. That is what documented compliance buys you, and it is not optional in a city where the insurance market is already tight.

If you own a condo in Kings Point, Century Village, or any Delray Beach 55+ community and your windows are fogged, binding, or original from the 70s, start with a free estimate that respects the approval sequence. Call (954) 280-4413. We’ll measure, we’ll build the architectural submittal, and we’ll quote the product lines that actually pass in Delray Beach on paper, side by side, with both warranty layers registered in writing before the truck leaves your driveway.

Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Delray Beach and southern Palm Beach County with impact windows and doors built to the local code and installed to the local sequence.