Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterImpact Windows & Doors in San Castle, FL: The Real Cost of a Coastal-Spec Install
Most impact window and door replacements in San Castle run $900 to $2,800 per opening installed, depending on whether the existing concrete block buck can accept a standard unit or needs reframing. A full-house retrofit of a 1960s CBS home typically lands between $18,000 and $38,000. The price swings hard on one thing most homeowners don’t see coming: the original jalousie or single-pane aluminum frames are almost never sized to today’s impact-rated units, so the masonry opening itself has to be modified before a real hurricane window goes in.
We see it weekly in San Castle. A homeowner pulls out a corroded jalousie window off Pine Ridge Road, measures the hole, and buys what looks like the right impact unit. Then the glass sits an inch short, the flashing won’t lap the block correctly, and the first summer thunderstorm drives water behind the sill. The cheap fix becomes a mold and termite problem inside two seasons.
That’s the conversation we’d rather have before the window is bought, not after. If you’re pricing the job in San Castle, call (954) 280-4413 and we’ll walk the openings with you and put real numbers on paper.
Why TruePane Windows & Doors Is the Company San Castle Calls for a Second Opinion
We’re not a franchise crew rotating through Orange County on a quarterly route. TruePane has been installing and replacing windows and doors since 2008, founded by second-generation glazier Dale Kessler. What that means in a community like San Castle is practical: we know the CBS homes here, we know what the original builders used for window bucks in the 1950s and 1960s, and we know what fails first when salt air and humidity sit on an aluminum frame for thirty years.
Our Impact Windows & Doors team measures every opening twice and shows you manufacturer lines side by side on paper: PGT, CGI, Simonton, Ply Gem. You see the frame, the glass package, the warranty duration, and the installed price before you sign anything. Both manufacturer warranty layers get registered in writing before the truck leaves your driveway. That’s not a pitch. It’s our standard, and it’s been the standard since Dale started the company.
San Castle homeowners call us for the same three reasons, in this order: someone answers the phone, the technician shows up when the schedule says, and the bill matches the quote. We hold to all three. A live person answers 24 hours a day, 7 days a week. No voicemail tree, no regional call center.
Our Impact Windows & Doors Services in San Castle
Hurricane Impact Windows
Most San Castle homes still carry their original single-pane aluminum or jalousie windows. Those units do nothing against wind-borne debris, they leak humidity into the house, and their seals are usually gone. Replacing them with impact-rated double-hungs or casements means more than glass: it’s often a full reframing of the existing concrete buck, new stainless anchors, masonry-rated flashing tape, and a marine-grade sealant against the block. We do that work in-house. We don’t sub it to a framing crew that’s never seen a 1960s CBS opening.
Impact Sliding Glass Doors
Sliding glass doors in San Castle take direct afternoon sun and plenty of blowing rain off the Atlantic in summer. If the original door track is set into the slab and the frame was never flashed properly, water gets under the sill and rots the subfloor. We strip the old door, inspect the buck, replace any damaged wood, and set the new impact slider with a sill pan and backer rod the way the Florida Building Code requires. Brands we regularly install here include PGT, CGI, and ES Windows.
Impact Entry & French Doors
A front door in San Castle has to do three jobs: take a wind load, seal against humidity, and not bind when the jamb swells in July. We see plenty of doors that fail all three. Impact-rated entry doors and French doors from Ply Gem or CGI get hung on reinforced jamb frames, with multipoint locks and compression weatherstripping that holds up to Central Florida’s wet season.
Impact Garage Doors
The garage door is the largest opening on most San Castle homes and the one most often overlooked in a wind mitigation retrofit. If it’s not braced or impact-rated, a pressure differential during a storm can blow it in and take the roof with it. We install impact-rated garage doors and retrofit bracing for existing doors, and we document the work for your wind mitigation inspection.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in San Castle
We’re an authorized installer for more than a dozen manufacturer lines, which matters when you’re comparing impact windows side by side. In San Castle we install and service PGT, CGI, Ply Gem, and Simonton most often, because those lines offer the coastal-spec frames and laminated glass packages that hold up to salt air and UV. We keep fast-track ordering with those manufacturers, and we register both warranty layers in writing on every job. If a seal fails or a balance breaks later, the homeowner has paperwork with real durations, not a hardware store receipt and an 800 number.
Common Impact Windows & Doors Problems We See in San Castle Homes
- Corroded jalousie pivots and fogged slats: The louvered glass slats on original San Castle jalousie windows sit in aluminum channels that corrode in humid air, and the slats themselves lose their seal coating within a decade. By now, most of them rattle, fog, and let outside air straight through.
- Masonry flashing failures at the buck: Concrete block homes need a specific flashing sequence: backer rod, sealant, and a sill pan that laps the face of the block. When a previous installer skipped that, wind-driven rain gets behind the sill and rots the wood jamb from the inside out.
- Aluminum frame sweating and seal rot: Single-pane aluminum frames from the 1960s and 1970s conduct heat and cold, so they condense against San Castle’s summer humidity. That moisture sits in the bottom track, corrodes the frame, and eventually the insulated glass seal fails.
- Undersized standard replacement windows: A stock window bought for a San Castle CBS opening rarely fits the original buck. The gap gets filled with shims and caulk instead of a proper infill and flashing, and the window loses most of its wind-load rating in the process.
Pricing for Impact Windows & Doors in San Castle, FL
The big driver is the masonry work. A home with true standard openings can sometimes accept a factory unit directly. Most mid-century San Castle homes cannot. If the buck needs infilling, new anchoring, or a custom frame width, the material and labor cost climbs. That’s why we walk the openings before we quote. Call (954) 280-4413 and we’ll give you line items, not a ballpark.
We Also Serve Cities Near San Castle
TruePane crews work throughout the communities around San Castle, including Acacia Villas, Alafaya, Altamonte Springs, and Altoona. If you’re one town over and looking for the same straight-forward pricing and warranty registration, give us a call. Our Impact Windows & Doors in San Castle team coordinates scheduling for the surrounding area from our South Florida office, and we’ll be there when we say.
Serving San Castle, FL - Our Local Coverage Area
We’re based in the San Castle area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Impact Windows & Doors in San Castle
Can I just replace my San Castle jalousie windows with a standard impact window from a big-box store?
No. The original jalousie opening in most San Castle CBS homes is roughly the footprint of a modern double-hung, but the mounting surface and sill condition almost never match a stock impact unit without modification. The glass slat channel has to come out, the buck needs to be inspected and usually infilled or reframed, and the new window needs flashing and sealant rated for masonry. A box-store window set into an unmodified jalousie opening will not meet Florida Building Code wind-load requirements, and it will leak. Call (954) 280-4413 and we’ll tell you what your specific openings need before you spend money.
Does Orange County require a permit for impact window replacement in San Castle?
Yes. San Castle is unincorporated Orange County, which means all permitted window and door replacements must meet Florida Building Code wind-load standards for the home’s location, and the inspector will check the anchoring and flashing details for a concrete block substrate. We pull the permit, schedule the inspection, and make sure the paperwork is ready before the inspector arrives. It’s part of every job we do here.
Why do my aluminum window frames sweat so much in San Castle’s humidity?
Aluminum conducts heat roughly 1,000 times faster than vinyl or fiberglass, so in Central Florida’s humid subtropical climate the frame surface drops below the dew point and condensation forms. The sweat then sits in the track, corrodes the frame, and in older San Castle homes it wicks into the drywall and sill. A proper replacement with a thermally broken frame or a non-metallic material stops the condensation at the source.
What is the typical markup for a coastal-spec impact window versus an inland-spec unit?
Coastal-spec impact windows in the San Castle market run 15% to 30% above inland-spec units of the same size and style. The difference is in the marine-grade frame finish, stainless steel hardware rather than zinc-plated, and the heavier laminated glass package. On a full-house job, that’s real money. We show both specs side by side on paper, with the exact line-item cost difference, so you decide with your own numbers.
Will replacing my old jalousie windows with impact double-hungs actually lower my energy bill?
Yes, and the difference is measurable in San Castle’s climate. Original jalousie windows have no meaningful air seal, so humid outside air moves through the slat channels constantly. A properly flashed impact double-hung with low-E glass and argon fill cuts that infiltration down to near zero. Most homeowners report a 20% to 35% reduction in cooling costs after a full jalousie-to-impact conversion, depending on the home’s insulation and shading.
Call TruePane Windows & Doors for Impact Windows & Doors in San Castle
If your San Castle home still has jalousie or single-pane aluminum windows, they’re costing you money every month and they won’t protect the house when the next hurricane tracks toward Orange County. We’ll come out, measure every opening, tell you honestly what needs reframing and what doesn’t, and put prices on paper. Our Done Right Promise covers the workmanship, and both manufacturer warranty layers are registered in writing before the truck leaves. Call (954) 280-4413 to schedule your free estimate.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving San Castle and surrounding communities since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.