Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Sliding & Patio Doors Across Eatonville
Sliding and patio door replacement in Eatonville, FL most often comes down to one thing: wind-load compliance. Orange County sits in a 130 mph design wind speed zone, and most of Eatonville’s original doors, especially the jalousie and single-pane aluminum sliders in pre-1960 wood-frame homes, were never rated for anything close to that. We replace them with impact-rated systems that carry a Florida Product Approval or NOA, pull the permit, pass the inspection, and hand you the documentation your insurance carrier wants to see. If you’re pricing a slider in Eatonville, call (954) 280-4413 and we’ll put a written, side-by-side quote in your hand. We’re Sliding & Patio Doors specialists, and we’ve worked on enough of these houses to know what’s behind the old frame before we quote it.
Why TruePane Windows & Doors Is Eatonville’s Preferred Sliding & Patio Doors Company
Eatonville is not a cookie-cutter suburb. It’s one of the oldest incorporated African American municipalities in the country, and a lot of its housing stock was built between the 1940s and 1970s, well before current building codes existed. We’ve rebuilt rough openings on West Kennedy Boulevard, near Hungerford Elementary, and throughout the neighborhoods off Lake Drive where rotting sill plates hide behind old sliding door tracks. That local experience matters because you can’t quote these jobs accurately from a satellite photo. You have to pull the old door, look at the framing, and tell the truth about what’s underneath.
Dale Kessler founded TruePane in 2008 on a simple rule: if the pane is not true, the job is not done. That’s the standard on every Eatonville install. Our technicians are background-checked and uniformed. They measure every opening twice. They register both manufacturer warranty layers in writing before the truck leaves your driveway. And our Done Right Promise means if something’s not right, we fix it. No paperwork fights, no fine print. A live person answers the phone 24 hours a day, seven days a week, so when you call about a patio slider that binds in July, someone actually picks up.
Our Sliding & Patio Doors Services in Eatonville
Heavy-Duty Sliding Doors
Eatonville’s older wood-frame homes rarely have the load path that modern impact-rated sliding doors demand. A heavy-duty slider, think PGT or CGI multi-point lock systems, needs a header and king studs that can actually carry hurricane wind loads. We rebuild those rough openings with pressure-treated lumber, install the proper header, and then set the door. In Eatonville, a heavy-duty impact slider typically runs $3,800 to $7,500 installed, depending on opening width and framing condition. The framing repair is usually the unknown variable, and we price it honestly upfront, with the full scope on paper before work begins.

Patio Sliding Doors
Most Eatonville patio doors we see are either original single-pane aluminum or cheap inserts someone put in twenty years ago. A proper impact-rated patio slider with laminated low-E glass and argon fill will change how the house feels in August. Typical pricing in Eatonville for a standard 6-foot impact patio slider runs $3,200 to $6,400 installed, including the permit and inspection. The range depends on whether the existing rough opening is square and sound, or whether decades of humidity have eaten the jack studs. We’ll tell you which one you have before we quote the final number.

Pocket & Barn Doors
Some Eatonville homeowners want the old swinging patio door gone entirely and a pocket or barn-style slider in its place. On the newer slabs off Kennedy Boulevard and around Lake Catherine, this is a clean retrofit. On older pier-and-beam homes, there’s often a structural beam hiding in the wall where the pocket needs to go, and that changes the scope. We’ve done these on homes throughout Eatonville, and we handle the header work, the track, the hardware, and the finish. A quality interior pocket door system in Eatonville starts around $1,900, and a heavy glass barn-door patio system runs $4,500 to $9,000 depending on glass and hardware.

Panoramic Sliding Systems
Panoramic sliders, the multi-panel glass walls that open a corner of the house, are gaining ground in Eatonville as homeowners update older properties. The challenge here is floor-to-ceiling glass on a house that may not have been framed for it. We have installed ES Windows and ECO Window Systems panoramic units in Eatonville, and the full install, including structural header work and sill waterproofing, runs $12,000 to $28,000 depending on panel count and glass package. We’ll show you the manufacturer line side by side on paper so you can see what you’re actually buying.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Eatonville
We’re an authorized installer for more than a dozen manufacturer lines, and for Eatonville specifically we lean on brands that carry the Miami-Dade or Florida Building Code product approvals this county’s wind zone demands. CGI, ES Windows, and ECO Window Systems are the ones we quote most often here because they offer impact-rated sliders that match the scale of Eatonville’s smaller mid-century homes. We stock common replacement parts locally and can order any custom unit with a realistic lead time. No guesswork on what will pass an Orange County inspection.
Common Sliding & Patio Doors Problems We See in Eatonville Homes
- Rotted sill plates under original sliders. The old aluminum sliding doors on Eatonville’s 1940s and 1950s homes were face-nailed and rarely flashed. Decades of afternoon thunderstorm-driven rain wicked into the opening and destroyed the framing. By the time the door binds or drops, the sill and jack studs are usually gone.
- Jalousie and single-pane glass with no impact rating. A wind-borne branch in a named storm turns these into shrapnel. Beyond the danger, the non-rated opening is exactly what insurance companies flag when they non-renew policies in Orange County.
- Fogged insulated glass units in newer inserts. Eatonville’s humidity and high indoor-outdoor vapor pressure differential are brutal on cheap sealed units. We see the fogged-glass failure within five to eight years on low-end sliders, far sooner than the label suggests.
- Doors that bind in July. Wood framing expands in Florida’s wet season. If the original opening wasn’t rebuilt square and flashed properly, the door swells, drags on the track, and eventually the rollers fail. The repair is rarely the roller; it’s the framing behind it.
Pricing for Sliding & Patio Doors in Eatonville, FL
We quote Eatonville jobs honestly, with the line items on paper. A standard impact-rated patio slider in this market runs $3,200 to $6,400 installed. Heavy-duty sliders run $3,800 to $7,500. Panoramic multi-panel systems start around $12,000. What moves the number is the framing, not the door. If we have to rebuild a rotted rough opening on a pre-1960 home, that adds $600 to $1,800 in lumber, flashing, and labor, depending on how far the rot ran. We tell you before we start. You’ll never get a change order after the wall is open because we scope the framing during the measure, not after demolition. Call (954) 280-4413 for a free written estimate on your Eatonville slider. We’ll stand behind it with the Done Right Promise and both warranty layers registered in writing.
We Also Serve Cities Near Eatonville
Our crews work all over the neighborhoods around Eatonville, and we regularly take on jobs in Acacia Villas, Alafaya, Altamonte Springs, and Altoona. If you’re just over the town line and dealing with the same 130 mph wind zone and aging wood-frame construction, the same standards apply. Call us and we’ll schedule a measure.
Serving Eatonville, FL - Our Local Coverage Area
We’re based in the Eatonville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Sliding & Patio Doors in Eatonville
A sliding patio door in Eatonville must carry a Florida Building Code product approval or Miami-Dade NOA demonstrating compliance with the 130 mph design wind speed for Orange County, which typically means an impact-rated or wind-borne-debris-protected assembly when the door is in a wind-borne debris region. The inspector will want the approval documents attached to the permit, and the glass package and frame must match exactly what the approval lists. Call (954) 280-4413 and we’ll show you the approval on the specific door we’re quoting, not a general sales sheet.
Because most of Eatonville’s original homes were built between the 1940s and 1970s with unflashed, face-nailed wood rough openings, and decades of Florida humidity and storm water have rotted the wood behind the old door. We rarely pull an original slider on a pre-1960 Eatonville home and find framing we can reuse. The good news is we scope it during the measure, so the price we quote is the price you pay. Call (954) 280-4413 for a free estimate with the framing scope already included.
We install CGI, ES Windows, and ECO Window Systems impact-rated sliders in Eatonville, along with other approved manufacturers. All three carry the product approvals Orange County requires for the 130 mph wind zone. We show you each line side by side on paper with the actual glass package, frame material, and warranty duration listed, so you’re comparing real products, not brochures. Call (954) 280-4413 and we’ll bring the spec sheets to the measure.
A compliant, permitted, inspected sliding door installation gives your insurance carrier written proof that the opening now meets the Florida Building Code wind-load requirements, which removes a common non-renewal or surcharge trigger for older Eatonville homes. We handle the permit close-out and provide the inspection record and product approvals so you can send them directly to your agent, and the same documentation protects you if you ever sell the house. Call (954) 280-4413 and we’ll walk you through what the paperwork looks like in Orange County.
If the fog is between the panes of an insulated glass unit, the seal has failed and the glass pack needs replacement, not just cleaning; on a modern impact-rated slider, we can often replace the IGU alone, but on an old single-pane or jalousie door there’s nothing to repair and the entire unit should be replaced. In Eatonville’s humidity, a failed seal also means the U-factor and SHGC performance is gone, so you’re paying to cool outdoor air. Call (954) 280-4413 and we’ll tell you which situation you have after a quick look.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Eatonville and surrounding Orange County communities.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After