Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Sliding & Patio Doors Across Redington Shores
Sliding and patio door work in Redington Shores is different from the same job ten minutes inland. Every opening on this island takes salt air from the Gulf and Boca Ciega Bay at once, which means the track, rollers, and seals fail faster here than almost anywhere else in Pinellas County. If your slider is sticking, fogged, or sagging, call us at (954) 280-4413. We know what a barrier island door is up against, and we specify the work so you do not pay for the same door twice.
Why TruePane Windows & Doors Is Redington Shores’s Preferred Sliding & Patio Doors Company
TruePane has been installing and repairing Sliding & Patio Doors on Gulf Coast properties since 2008, and the work we do in Redington Shores is built around what this island actually does to a door. Dale Kessler founded the company on one rule: if the pane is not true, the job is not done. That means we measure every rough opening twice, quote manufacturer lines side by side on paper, and register both warranty layers in writing before the truck leaves your driveway.
Redington Shores homeowners rarely call us for a simple swap. They call because a slider that looked fine in March is binding in August, or because a seal failed and now the glass fogs every morning. We send background-checked, uniformed technicians who work in your home the way they would work in their own mother’s. Our Done Right Promise covers the workmanship on every job, with no paperwork fights and no arguing. A live person answers the phone 24 hours a day, 7 days a week, not a voicemail tree and not a regional call center.
Our Sliding & Patio Doors Services in Redington Shores
Impact-Rated Sliding Doors
Every exterior door replacement in Redington Shores must meet Florida Wind-Borne Debris Region impact requirements. That is not a preference; it is the code. We install impact-rated sliders from CGI, CWS, and ES Windows that carry the Miami-Dade NOA listings Pinellas County permit reviewers look for. The frame is fusion-welded, the glass is laminated, and the hardware is stainless steel, not zinc-plated. If a storm pushes water across Gulf Boulevard again, this is the door you want between you and it.
Panoramic Sliding Systems
For homeowners who want the view from a Redington Shores beach cottage without a wall of mullions getting in the way, a panoramic sliding system opens the wall from corner to corner. These are multi-panel systems, some with panels that stack or pocket completely out of sight. On a barrier island this narrow, the view is the asset, and a panoramic system keeps it wide open while still meeting the impact code.
Heavy-Duty Sliding Doors
Heavy-duty sliders are what we recommend when the opening is wide, the panels are tall, or the salt air has already destroyed one door and the homeowner is done experimenting with budget options. These units use thicker frame profiles, stainless roller assemblies, and tracks designed to shrug off the pitting and corrosion we see on every island slider after five to seven years. In Redington Shores, heavy-duty is not an upgrade; it is the coastal spec.
Pocket & Barn Doors
Interior pocket doors and barn doors are a smart fit for the small floor plans in most 1950s-to-1970s Redington Shores CBS cottages. A swinging door eats floor space; a pocket door disappears into the wall. We install and repair both, and we are honest about which ones belong in hurricane-rated exterior walls versus interior partitions. Not every door is structural, but every door has to open true.
Screen Door Installation
A screen door on a barrier island takes salt and sun continuously, which is why we install screen doors with marine-grade mesh and aluminum or stainless frames. You want the ocean breeze, not the no-see-ums. Our screen door installations are built to last more than a season or two of Gulf wind.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Redington Shores
TruePane is an authorized installer for more than a dozen manufacturer lines, and for Redington Shores work we lean on CGI, CWS, and ES Windows because their coastal ratings hold up under the bidirectional salt exposure this island delivers. We stock common replacement rollers, tracks, and weatherstripping for these brands locally, which means faster turnaround when a slider needs repair rather than full replacement. If your existing door is another brand, we service those too, and we will quote the replacement parts on paper so you know exactly what you are buying.
Common Sliding & Patio Doors Problems We See in Redington Shores Homes
- Corroded tracks and seized rollers. Salt air from the Gulf on one side and Boca Ciega Bay on the other pits aluminum tracks within five to seven years. The rollers seize, the panel grinds or jumps off-track, and the door becomes a two-hand job to move.
- Failed insulated glass seals. The coastal temperature swing plus constant humidity breaks the seal on dual-pane glass. Fog between the panes that you cannot wipe off is a failed seal, not condensation, and it means the glass has lost its insulating value.
- Wind-driven water intrusion at the jamb. Worn weatherstripping lets wind-driven spray reach the roller assemblies and screws. The panel sags, water enters the concrete block wall cavity, and by the time you see a stain on the interior drywall the damage is already started.
- Jalousie windows and original aluminum sliders flagged on permit. Most 1950s-to-1970s beach cottages in Redington Shores still have jalousie windows and single-pane aluminum sliders. Any renovation permit in Pinellas County flags them immediately, and replacing them in solid CBS block requires a custom rough-opening cut that out-of-town contractors routinely underbid.
Pricing for Sliding & Patio Doors in Redington Shores, FL
| Service | Typical Price Range in Redington Shores |
|---|---|
| Slider track and roller rebuild | $280-$550 |
| Insulated glass unit replacement (standard slider) | $450-$950 |
| Impact-rated sliding door (6-foot, single panel, installed) | $2,800-$5,200 |
| Heavy-duty impact slider (8-foot opening, installed) | $4,500-$8,500 |
| Pocket door conversion (interior, installed) | $1,800-$3,600 |
| Screen door (marine-grade, installed) | $350-$800 |
This is the honest spread for Redington Shores work. A standard slider track rebuild on a ground-floor utility room runs near the bottom of that range. A full impact-rated replacement on a wide opening in a CBS cottage runs high, because the rough opening has to be cut in solid block, the frame must be anchored per code, and the glazing must carry a Miami-Dade NOA. We do not pad change orders. You get a written line-item quote before we start, and the number on the quote is the number on the invoice. Call (954) 280-4413 to schedule your free estimate.
Why Coastal-Spec Hardware Costs More Up Front and Less Over Ten Years
On a two-blocks-wide barrier island like Redington Shores, the cheap spec costs more within a decade. An inland-spec aluminum slider with zinc-plated hardware and standard weatherstripping starts failing at the track and jamb within five years, and by year eight the rollers have seized, the seal has failed, and the panel is sagging enough to let wind-driven spray into the wall cavity. That is the door we see in CBS cottages on 161st Avenue and Gulf Boulevard: white salt bloom at every jamb, fog you can wipe off the inside pane, a track so pitted the rollers will not roll. Replacing it once at budget price and again at coastal price costs more than doing it right the first time.
What we specify instead: fusion-welded frame construction, stainless steel rollers and screws, marine-grade weatherstripping, and flashing tape at every penetration. The track is what dies first on an island slider, so we use heavier-gauge track with a corrosion-resistant finish. The hardware is where the next failure starts, so we use stainless. The price gap between the inland spec and the coastal spec runs roughly 20 to 35 percent on the same door size in Redington Shores. You pay it once, and you do not see us again for the same opening until the next storm cycle. We replaced a jalousie window and a corroded aluminum slider in a 1960s CBS cottage on 161st Avenue, just a block off Gulf Boulevard. The original frame had salt bloom at every jamb, the insulated glass had fogged from a failed seal, and the track was so pitted the rollers had frozen solid. Our crew cut the solid block opening for a new impact-rated slider with a fusion-welded frame, stainless hardware, and flashing tape at every penetration. That is the standard for every job we do in Redington Shores.
We Also Serve Cities Near Redington Shores
Our crews serve the entire barrier island corridor, including Acacia Villas, Alafaya, Altamonte Springs, and Altoona. If you are a few blocks inland from the Gulf, call us at (954) 280-4413 and ask about our schedule for your area. We will be there when we say.
Serving Redington Shores, FL - Our Local Coverage Area
We’re based in the Redington Shores area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Sliding & Patio Doors in Redington Shores
Redington Shores is a narrow barrier island with the Gulf of Mexico on the west side and Boca Ciega Bay on the east. Your slider takes salt air and wind-driven spray from both directions at once, which doubles the salt load compared to a door even one mile inland in Seminole or Largo. The aluminum track and roller assemblies pit within five to seven years, and the door starts sticking or jumping off-track. Coastal-spec hardware with stainless rollers and corrosion-resistant track finishings lasts two to three times longer. Call (954) 280-4413 for a track inspection, estimates are free.
It depends on the wall. Most 1950s-to-1970s Redington Shores cottages are concrete block construction, and cutting a jalousie opening into a full slider rough opening means cutting solid block and adding a structural header. It is masonry work, and it is more labor than swapping a wood-framed window in a stick-built home. We do it regularly on CBS cottages across the island, and we quote the cut, the header, the flashing, and the door installation as one line-item price so you know the real number before we start. Call (954) 280-4413 for an exact estimate.
Yes, if the door is being replaced. Pinellas County’s coastal high-hazard area requires impact-rated glazing or a code-compliant shutter system on every exterior opening, and the permit reviewer will check. If you are replacing a door, the new unit must carry a Miami-Dade NOA listing or meet the current Florida Building Code impact standard. Shutters can satisfy the code on existing openings, but a new door still has to be impact-rated. We quote both options on paper, and we pull the permit and pass the inspection as part of the job. Call (954) 280-4413 to talk through your opening.
Three reasons. First, the barrier island salt load means the hardware and finishes have to be coastal spec, and stainless hardware plus marine-grade weatherstripping costs more than the inland version. Second, many Redington Shores homes are CBS construction, so cutting or widening a rough opening is block work, not frame work, and the labor is higher. Third, impact-rated glazing is non-negotiable here, and a Miami-Dade NOA door costs more than a standard door. The spread is real but you are not paying for the same door twice. Call (954) 280-4413 for a written quote.
No. If the fog is between the two panes of glass, the insulated glass unit’s seal has failed, and you cannot wipe it off. The desiccant inside the unit is saturated, the argon or krypton fill has escaped, and the glass has lost most of its insulating and sound-dampening value. This is a replacement of the glass unit, not a cleaning. On Redington Shores sliders, seal failure is common because the coastal temperature swing and constant humidity stress the seal every day. We replace the IGU and restore the door’s thermal performance, usually in one visit. Call (954) 280-4413 for a price.
Contact TruePane Windows & Doors
If you need a sliding or patio door replaced, repaired, or quoted in Redington Shores, call us at (954) 280-4413. You will get a live person on the phone, a straight answer about cost and schedule, and a free written estimate with no surprise line items. We have been doing this work on the Gulf Coast since 2008, and we plan to be here in thirty more.
Written by Dale Kessler, Owner at TruePane Windows & Doors. If the pane is not true, the job is not done.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.