Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Window Installation Across Fountainebleau
Window installation in Fountainebleau carries a requirement nobody in Broward or Palm Beach County ever deals with: every unit must hold a Miami-Dade Notice of Acceptance (NOA), not just a Florida Product Approval. Skip that detail and the county inspector will fail the job at rough inspection, and you’ll be paying to tear out and reorder windows. We’ve handled this specific paperwork and site work for years, from tight 1960s CBS homes off SW 8th Street to the quiet streets around Fountainebleau Park. Call (954) 280-4413 and we’ll talk through what your house actually needs.
Why TruePane Windows & Doors Is Fountainebleau’s Preferred Window Installation Company
Fountainebleau is not a neighborhood where you can send a generalist crew and hope for the best. The homes here were mostly built between the 1960s and 1980s, concrete block construction, with window openings cut for jalousie and thin single-pane aluminum frames. That means most replacement work involves custom buck framing, NOA-verified install details, and a crew that knows how to keep a zero-lot-line side yard from becoming a battleground with the neighbors. We have been doing exactly this work here long enough that our technicians can usually tell you what is behind a wall before they open it.
Dale Kessler founded TruePane Windows & Doors in 2008 as a second-generation glazier who was tired of watching out-of-true installs and voided warranties. The standard he wrote on the whiteboard then still runs our Fountainebleau crews now: if the pane is not true, the job is not done. Our Window Installation team works background-checked, uniformed, and trained to treat your house the way they would treat their own mother’s.
Our Window Installation Services in Fountainebleau
Most Fountainebleau homes have original window openings that do not match modern impact-rated units, so we start every quote by measuring the actual rough opening, checking the existing jambs, and confirming what the county will want to see at inspection. Here is how the common window types hold up in this neighborhood.
Casement Windows
Casement windows are a strong answer for the 1960s CBS homes throughout Fountainebleau. They seal tighter against wind-driven rain than sliders, and the hardware stands up to the salt-laden air that pushes inland during tropical systems. But the old jalousie rough openings are often too shallow for a standard impact-rated casement, which means custom buck framing is frequently part of the quoted job. We price that work honestly up front, on paper, side by side with the window line you choose.
Fixed & Picture Windows
Fixed and picture windows give Fountainebleau homeowners the biggest thermal gain with the fewest moving parts. They are also the simplest to fit with high-performance insulated glass that carries a Miami-Dade NOA. Placed on a shaded east wall or under a deep overhang, a quality fixed unit can dramatically cut the afternoon heat load that these concrete block homes absorb all day. The challenge is getting the buck framing right so the deeper impact glazing sits flush with the interior wall, and that is the difference between a pass and a failed rough inspection.
Sliding Windows
Sliding windows are popular in Fountainebleau’s mid-century homes because the original aluminum sliders were everywhere, and replacing like with like shortens the retrofit. Modern impact-rated sliders from PGT or CGI run heavier than the old single-pane units, and the tracks require a sturdier sill pocket than the 1970s rough openings provide. It is a manageable retrofit, but it is not a drop-in, and we tell customers exactly what additional framing will be needed before they sign anything.
Single & Double Hung
Single and double hung windows work well in Fountainebleau on walls where crank-out casements would interfere with walkways or tight side yards. Older CBS homes here sometimes have rough openings that are slightly under nominal modern sizes, and a double hung with the right jamb depth and a certified installation method will pass Miami-Dade inspection cleanly. We quote manufacturer lines from Ply Gem, PGT, and CGI side by side so you can see the weight, the glass package, and the NOA status of each before choosing.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Fountainebleau
We are an authorized installer for more than a dozen manufacturer lines, including PGT, CGI, Ply Gem, and CWS. Why that matters in Fountainebleau specifically is the NOA database: Miami-Dade inspectors verify the Notice of Acceptance number printed on the unit at both rough and final inspection. A brand with a statewide Florida Product Approval but no Miami-Dade NOA listing will not pass. We check that before we ever order a window for your house. When you call for a quote, we will show you the NOA numbers for the lines we recommend, in writing, before the truck leaves your driveway.
Common Window Installation Problems We See in Fountainebleau Homes
- Florida Product Approval without a Miami-Dade NOA. This is the most expensive mistake we see from contractors who normally work in Broward or Palm Beach County. The county inspector fails the rough inspection, the unit gets torn out, and the homeowner pays for the reorder.
- Old jalousie rough openings that are too shallow for impact glazing. The 1960s and 1970s CBS homes here were framed for thin louvered units. A standard 3-inch jamb impact window left proud of the interior wall violates the NOA installation details and fails inspection.
- Salt and humidity eating the old aluminum frames. Fountainebleau sits several miles inland but gets the same subtropical humidity and wind-driven salt air as coastal Miami. Original single-pane aluminum frames oxidize, pit, and let moisture into the wall cavity, and by the time the glass fogs the frame is usually gone too.
- Noise complaints from zero-lot-line work. Many Fountainebleau homes sit close enough to the neighbor’s bedroom that morning demo or hammer work before 8:00 AM triggers a stop-work order. We schedule noisy work inside county hours and keep staging in the side yard, not the street or the neighbor’s driveway.
Pricing for Window Installation in Fountainebleau, FL
A typical impact-rated window replacement in Fountainebleau runs $900 to $2,400 per opening, installed. That range covers a standard fixed or single hung from PGT or similar at the lower end, up to a large custom casement or sliding unit with high-performance low-e glass and complex buck framing at the top. Jalousie retrofits on concrete block homes tend to fall at $1,200 to $2,000 per opening because of the additional framing. If you are replacing multiple windows along one wall, the per-unit cost usually drops. Every quote is written, line-itemed, and priced before work begins. We do not write change orders. Call (954) 280-4413 for an exact number on your house.
Working on a Tight Fountainebleau Lot
Most lots in Fountainebleau were platted for the suburban boom years, which means skinny side yards, shared walls or near-shared walls, and a neighbor whose bedroom window is twelve feet from where you are setting a new impact unit. We plan every job around that reality. Staging goes in the side yard or the driveway, never in the street. Crews arrive knowing which window is coming out first and where the glass will be carried in. If we are working a shared party wall, we notify the neighbor before the first cut, and we keep hammer work inside county hours. That is not a courtesy add-on. It is how the job gets done without a stop-work order, and it is part of the written work plan you get before we start. Access affects the quote too. A second-story window over a fence line or a rear unit behind a carport costs more to reach safely, and we tell you that on the estimate, not after the fact.
On a recent job off SW 8th Street, a tight 1960s CBS home, our crew replaced a row of jalousie windows with impact-rated casement and fixed units from PGT. The original rough openings were sized for louvered frames, so we custom-fabricated buck framing to maintain the required jamb depth for the NOA-rated insulated glass units. We stacked staging in the side yard and kept the neighbor’s driveway clear for morning school drop-off. The job passed rough and final inspection on the first visit. That is the standard we expect from ourselves on every Fountainebleau home.
We Also Serve Cities Near Fountainebleau
TruePane covers Window Installation in Fountainebleau and the surrounding communities, including Acacia Villas, Alafaya, Altamonte Springs, and Altoona. Our crews know the local building departments and the county inspection workflow in each one. If you are just outside Fountainebleau and wondering whether we serve your street, call (954) 280-4413 and ask.
Serving Fountainebleau, FL - Our Local Coverage Area
We’re based in the Fountainebleau area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Installation in Fountainebleau
Fountainebleau homes must meet the Miami-Dade NOA impact standard; Energy Star is optional but strongly recommended for the cooling load these concrete block houses carry all summer. The two certifications cover different things. The NOA proves the window can withstand design wind pressures and projectile impact. Energy Star measures thermal performance. You can have an impact-rated window without an Energy Star label and pass county inspection, but you will pay for it in air-conditioning costs over the life of the unit. We quote glass packages side by side so you can see the difference in U-factor and solar heat gain coefficient before you choose. Call (954) 280-4413 for a written comparison.
Most original jalousie openings in Fountainebleau are too shallow for a modern double-hung to install correctly without buck framing. The jalousie frame is thin and the rough opening is often narrower than a standard replacement window needs. A proper retrofit adds framing to deepen and square the opening, and that work must be done to the NOA installation details or the county inspector will fail it. It is not a huge added cost, but it is an added step, and a contractor who skips it will leave you with a window proud of the interior wall and a failed inspection. We always measure the actual rough opening and quote the framing honestly.
The inspector fails the rough inspection and the unit must be removed and reordered. Miami-Dade County maintains a separate Notice of Acceptance database, and inspectors verify the NOA number printed on the product at both rough and final inspection. A window that is legal in Broward County can be torn out here if it lacks its own Miami-Dade NOA listing. That mistake costs the homeowner double: the first install and the reorder and reinstall. We check the NOA listing before we order anything for a Fountainebleau job, and we show you the number in writing.
No. Fountainebleau sits entirely within the High-Velocity Hurricane Zone, the same designation as beachfront Miami. There is no inland exemption in the HVHZ. The design wind load requirements for this neighborhood match Category 4 and 5 storm conditions, and every window and door must carry a Miami-Dade NOA regardless of how far from the coast you are. The only real difference inland is less salt exposure, but the structural requirement is identical to oceanfront property.
If the frames are solid and the openings will accept a reglaze, you can often replace just the insulated glass unit. But on most 1960s to 1980s aluminum frames in Fountainebleau, the failed seal is not the whole story. The aluminum has usually oxidized and pitted from decades of humidity and salt-laden air, and the frame itself is near the end of its service life. In those cases a full replacement makes better financial sense because you are not paying labor to put new glass into a frame that will fail again in a few years. We will tell you honestly which situation you have, and we will quote both paths if both are viable. Call (954) 280-4413 and we’ll take a look.
Call TruePane Windows & Doors at (954) 280-4413 for a free, written estimate on window installation in Fountainebleau. A live person answers the phone, and we will show you NOA numbers, pricing, and the work plan for your home before you commit to anything.
Written by Dale Kessler, Owner at TruePane Windows & Doors.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.