Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Window Installation Across High Point
Window installation in High Point is not a stock-size job. Most of the homes here are HUD-code manufactured units built between the late 1970s and early 1990s, which means rough openings run narrower and shallower than anything you’ll find on a stick-built house in Tampa or Orlando. We measure every opening twice, order to the actual jamb-to-jamb dimension, and register both warranty layers before the truck leaves your driveway. If you’re in High Point and tired of windows that fog, bind, or let the humidity through, call (954) 280-4413 and we’ll come take a look.
Why TruePane Windows & Doors Is High Point’s Preferred Window Installation Company
We’ve spent enough time in High Point to know what’s behind the walls. The community is a 55-plus manufactured-home retirement development in Hernando County, and that changes everything about how a window job gets quoted and installed. Builders who only handle conventional residential work will order a stock 32-inch unit, show up, and discover the opening is 30 inches at best. We don’t make that mistake, because we’ve done the walkthrough on dozens of homes along Goldenray Drive and the surrounding streets, and we know what HUD-code framing looks like once the old aluminum frame comes out.
Dale Kessler founded TruePane Windows & Doors on a rule that still governs every job: if the pane is not true, the job is not done. That’s not a slogan. It’s what drives us to pull permits that other contractors skip, to write the rot repair into the contract before we open the wall, and to stand behind every install with the Done Right Promise. Homeowners in High Point tell us the same thing: they’ve been burned by someone who showed up, swapped a window, and disappeared when the caulk failed six months later. We’re still here, still answering the phone, and still making it right.
Our crews serve High Point locally, with scheduling and dispatch coordinated from our South Florida office. A live person answers the phone 24 hours a day, 7 days a week. No voicemail tree, no callback form.
Our Window Installation Services in High Point
Single & Double Hung Windows
Single and double hung windows are the workhorses of High Point homes, but in a 1980s manufactured unit, the standard 32-inch-wide double hung won’t drop into the opening without frame modification. We order to the exact rough opening, then set the unit so the sash operates cleanly through every season. In High Point’s humidity, the old aluminum double hungs corrode at the corners and the balances wear out until the sash won’t stay up. A new double hung with vinyl or fiberglass frame, properly flashed and anchored, solves both problems.
Sliding Windows
Sliding windows are common in the bedrooms and kitchens of High Point manufactured homes, and they fail in predictable ways: the track fills with dirt and moisture, the rollers flatten, and the sash starts to bind. What we typically find behind an old slider is worse than the symptom. The original installation often lacked proper flashing, so years of Florida rain have been working into the sub-frame. We don’t just swap the sash. We pull the frame, inspect the jamb, repair any rot we find, and set the new slider on a properly flashed opening. Most High Point sliding window replacements run $450-$850 per opening, depending on size and whether the sub-frame needs work.
Fixed & Picture Windows
Fixed and picture windows in High Point tend to be the large front-facing units that let in the afternoon sun. In older manufactured units, these were often single-pane glass set in thin aluminum frames with no thermal break. The heat gain through these openings is substantial, and after 30 or 40 years, the vinyl glazing bead is brittle and the glass-to-frame seal is gone. We replace them with impact-rated glazing where the wind-load code requires it, and we register the warranty before we leave. A large fixed window replacement in High Point typically falls between $600 and $1,200 installed.
Awning Windows
Awning windows make sense in a climate like Hernando County’s, where you want ventilation during afternoon rain without letting water in. We install awning windows in High Point with stainless steel hardware that won’t seize in the salt-heavy coastal air. If you’re replacing a jalousie window in a bathroom or utility room, an awning unit with a proper screen is usually the cleanest upgrade, and it gives you a seal you can actually live with.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in High Point
We’re an authorized installer for more than a dozen manufacturer lines, including PGT, CGI, and Ply Gem. That means when we quote a High Point job, we can put two or three brands side by side on paper so you can see the difference in glass package, frame material, and warranty coverage before you spend a dollar. We stock local parts for the brands High Point homeowners already have in their walls, and we don’t push you toward whatever’s sitting in the warehouse. If your home calls for a Simonton sash or a PGT impact unit, that’s what we quote. You can reach us at (954) 280-4413 to talk through what’s available for your specific openings.
Common Window Installation Problems We See in High Point Homes
- Non-standard HUD rough openings. The original windows were built to 1970s and 1980s manufactured-housing dimensions, not the 32- and 36-inch widths you’ll find in a conventional home. Ordering from a big-box catalog without measuring jamb-to-jamb means a reorder and a delay. We measure in person before anything gets ordered.
- Rotted sub-framing behind old jalousies. On a Goldenray Drive double-hung replacement, our crew pulled the original aluminum frame and found the jamb studs rotted from decades of humidity behind improvised jalousie sealing. This is not rare in High Point. It’s what we expect. We write the framing repair into the contract before opening the wall, so the price doesn’t move mid-job.
- Pre-code glazing that fails wind-load requirements. Many original High Point windows were single-pane aluminum that doesn’t meet current Florida Building Code wind-resistance standards. A window replacement that skips the permit leaves that pre-code glazing in place and risks a failed inspection and an insurance issue down the road. We pull the permit and upgrade the opening to code.
- Narrow door and window frames that limit replacement options. Door frames in older HUD-code units are frequently narrower than conventional residential standards, which means off-the-shelf replacements won’t fit. We work with manufacturers to special-order units sized to the actual opening, so you get a proper seal, not a hacked-in fit.
Pricing for Window Installation in High Point, FL
Here’s what High Point homeowners should expect to pay. A standard single or double hung replacement in a manufactured home runs $400-$900 per opening, installed. Sliders fall in the $450-$850 range. Fixed and picture windows run $600-$1,200 depending on glass package and whether the unit must meet impact standards. Awning windows come in at $500-$950. These ranges assume a direct replacement with no hidden framing damage. When we find rot in the sub-frame, which we often do, we price that repair separately, in writing, before we touch it. No change orders. No end-of-job surprise. Call (954) 280-4413 for a free estimate, and we’ll walk the house and put numbers on paper.
We Also Serve Cities Near High Point
If you’re in Acacia Villas, Alafaya, Altamonte Springs, or Altoona, our Window Installation team covers those communities too. The framing and wind-load challenges in those areas are similar to what we handle every day in High Point, and we bring the same measure-twice standard to every opening.
Serving High Point, FL - Our Local Coverage Area
We’re based in the High Point area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Installation in High Point
We measure the actual opening, down to the half-inch, and special-order the window to fit it. We do not assume a HUD-code home will accept a stock 32- or 36-inch unit. In High Point, most of the original windows were installed to 1970s-1990s manufactured-housing dimensions, which run narrower and shallower than standard residential sizes. We quote to the actual jamb-to-jamb measurement, so the unit arrives ready to set. Call (954) 280-4413 to schedule a measurement, and we’ll walk the house with you.
We expect to find rot or corrosion behind them. The tape-and-caulk approach people used to keep the rain out also trapped moisture against the frame, and in High Point’s humidity, that means the sub-framing often needs repair before a new window can be anchored. We write that repair into the estimate before we start, so there’s no surprise number at the end of the job. Our Done Right Promise covers the workmanship, and both manufacturer warranty layers get registered in writing before we pull out of the driveway.
Yes, in most cases a permit is required, and that’s a good thing. Pulling the permit triggers a review of the opening against current Florida Building Code wind-load requirements. If the original glazing was pre-code single-pane, the permit process brings the replacement up to current standards, which protects you in a hurricane and keeps your insurance company from flagging the home. We handle the permit for you. Call (954) 280-4413 and we’ll explain exactly what applies to your property.
In some cases, yes, but only if the rough opening matches the manufacturer’s standard sizing. In a 1980s High Point manufactured home, it often doesn’t. Andersen and Pella build excellent windows, but they build to conventional residential dimensions. We’re an authorized installer for both brands, and when the opening won’t take a stock unit, we order through the manufacturer’s custom program or quote a comparable line that builds to the size you actually have. You’ll see both options in writing, side by side, before you decide.
We write an allowance into the contract for the sub-frame repair we expect to find. When we pull the old window and the damage turns out to be more or less than projected, we adjust against that allowance and get your written approval before we proceed. The price does not quietly creep up. You’ll never get a bill with a line item you didn’t approve. To get a detailed, line-by-line estimate for your home, call (954) 280-4413. The estimate is free, and the numbers go on paper.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving High Point and surrounding Hernando County communities with window and door installation done right.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.