Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Window Installation Across Orlando
Replacement windows in Orlando have to meet a standard that most of the country never thinks about: Florida Product Approval under the state’s wind-borne debris code. That’s not a suggestion. It’s Orange County code, and a window that doesn’t carry an FPA number will fail a permit inspection or get flagged on an insurance claim. TruePane installs FPA-numbered windows in Orlando every week, anchored into CBS block the way the code requires, with both warranty layers registered in writing before our truck leaves your driveway. Call (954) 280-4413 for a free estimate and a quote that shows exactly which products we’re putting in and what compliance they carry.
Why TruePane Windows & Doors Is Orlando’s Preferred Window Installation Company
We’re not a franchise that showed up in Orlando five years ago with a marketing budget and a batch of subcontractors. TruePane was founded by second-generation glazier Dale Kessler on a rule that still governs every install we do: if the pane is not true, the job is not done. Homeowners across Orlando, from Conway to Pine Hills to MetroWest, call us because the work comes with the Keystone Standard, which means both manufacturer warranty layers registered in writing and our Done Right Promise on top of that. If something isn’t right, we fix it. No paperwork fights, no arguing, no fine print that covers neither.
Orlando’s housing stock is mostly concrete block construction from the 1970s through 2000s. Anchoring a window frame into masonry is different work than screwing into wood studs, and it’s the kind of work our crews have done for years. We pull the Orange County permit, we anchor with code-approved fasteners, we flash the rough opening correctly, and we leave you with the documentation your insurance agent will want to see. A live person answers our phone 24 hours a day, seven days a week. Not a voicemail tree, not a callback form. You call, a person picks up.
Our Window Installation Services in Orlando
Casement Windows
Casement windows are workhorses in Orlando because they seal tight against the frame when closed, which matters when summer thunderstorms drive rain sideways and wind-load pressure spikes. We install impact-rated casement units with FPA numbers that satisfy Orange County’s wind-borne debris requirements. In neighborhoods like College Park and Winter Park, where original aluminum single-pane windows are common, casement retrofits into CBS openings give homeowners a tighter seal and lower cooling bills without changing the look of the house.
Awning Windows
Orlando still has thousands of original jalousie and awning windows from the 1960s and 1970s, especially in College Park, Conway, and Pine Hills. Those old aluminum awning windows leak air, rattle in storms, and offer little insulation. We replace them with modern awning windows that hinge at the top, open outward, and keep rain out even when left cracked open during a passing shower. If you need a window that can ventilation without letting a storm soak the sill, awning units make sense in this climate.
Fixed & Picture Windows
Fixed and picture windows carry no moving parts, which means fewer failure points and a cleaner seal. In Orlando’s vacation rental market, short-term owners in the Kissimmee, Davenport, and ChampionsGate corridors lean toward fixed windows with low-SHGC argon fill because they cut cooling costs and look good in listing photos. We install them with the same masonry anchoring and flashing detail as every operable unit we set, and we register both warranty layers before we leave.
Single & Double Hung
Double-hung windows are common in Orlando’s older CBS bungalows, and retrofitting them into block openings takes care the code doesn’t forgive. We measure every opening twice, quote manufacturer lines side by side on paper, and anchor each frame into the masonry with code-approved fasteners. Whether you’re in Hunter’s Creek or east Orange County or off Michigan Street, your double-hung replacement either meets the Florida Building Code or it doesn’t. Ours does.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Orlando
TruePane is an authorized installer for more than a dozen manufacturer lines, including, ES Windows, and ECO Window Systems. We quote side by side on paper so you can see exactly what you’re buying and what each product costs before you commit. We stock common hardware and parts for the brands Orlando homeowners already have, which means fewer return trips and faster work when a sash needs rebalancing or a latch is binding. If you have a brand preference, tell us. If you don’t, we’ll walk you through the trade-offs in plain English, on paper, with prices attached.
Common Window Installation Problems We See in Orlando Homes
- Fogged glass from the post-Charley replacement boom. Between 2004 and 2007, thousands of budget-grade insulated glass units went into Orlando homes. Many are failing now in MetroWest, Hunter’s Creek, and east Orange County – argon gone, U-factor effectively doubled, condensation staining the sash. The fix is a new insulated glass unit or full sash replacement, not a miracle defogging service.
- Non-impact windows without FPA numbers. A home inspection for sale or rental in Orange County can fail when replacement windows don’t carry Florida Product Approval. We see this constantly with homes from out-of-state flips or vacation-rental conversions. The fix is a tear-out and reinstallation with compliant, FPA-numbered units.
- Water intrusion around improperly flashed openings on CBS block. Orlando’s daily thunderstorms find every gap. When a window wasn’t flashed correctly into a masonry opening, water wicks into the jamb pocket and rots the trim or delaminates the drywall in a single wet season. Proper flashing is cheap insurance compared to the repair.
- Aluminum frame oxidation from UV exposure. Florida’s sun is harder on window frames than most inland U.S. markets. Original aluminum jalousie and awning windows in College Park and Conway oxidize, pit, and eventually leak air. Replacement with vinyl or impact-rated aluminum stops the cycle, especially when the new frame is anchored and flashed correctly.
Pricing for Window Installation in Orlando, FL
We Also Serve Cities Near Orlando
TruePane serves the whole Orlando metro. We work in Orlando proper, plus Winter Park, Maitland, Goldenrod, and Altamonte Springs. If you’re in one of those nearby cities, the same crew, the same code knowledge, and the same written warranty registration apply. Call and ask for a free estimate, and we’ll be there when we say.
Serving Orlando, FL - Our Local Coverage Area
We’re based in the Orlando area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Installation in Orlando
Do replacement windows in Orlando need to be impact-rated, or can I use standard double-hung with shutters?
Yes and no. Orange County sits in Florida’s wind-borne debris region, so replacement windows must either be impact-rated with FPA numbers or protected by an approved opening-protection system like shutters that also carry product approval. A standard double-hung without protection will fail a permit inspection. We walk you through both paths and quote the real cost difference so you can decide with your insurance agent’s input. Call (954) 280-4413 for an exact quote.
Why are so many Orlando CBS homes getting window replacements in College Park and Conway right now?
Because the original aluminum single-pane units installed in those neighborhoods during the 1960s and 1970s are end of line, and the 2004 to 2007 post-Charley replacements are hitting 17 to 20 years old with failing seals and hardware. Both cycles are converging in the same block-by-block pattern, so we see entire streets where the original windows and the first replacements are failing at the same time. If your neighbors are replacing windows, yours are probably on the same timeline.
How does a Florida Product Approval number on my new windows actually affect an insurance premium or claim?
It gives your insurer a documented, code-compliant opening that passed a wind-borne debris test. When a storm hits and you file a claim for water intrusion or impact damage, the first question your adjuster asks is whether your openings met code. An FPA-numbered window with the paperwork on file answers that question in your favor. Without it, a claim can be reduced or denied. We register the FPA numbers and both warranty layers in writing before we leave the driveway. Call (954) 280-4413 to schedule a free estimate.
What is failing on the cheap windows installed right after Hurricane Charley in MetroWest?
Mostly the insulated glass seals. Budget-grade units from the 2004 to 2007 rush used low-cost spacers and sealants that break down under Orlando UV and heat. The result is fogged glass, failed argon fill, and a U-factor that’s effectively doubled, which means the window performs like a single pane. Hardware failure and frame warping follow. The fix is a new sash or full window replacement, and we quote both.
Can I replace just the glass in a fogged Orlando window, or do I need a new sash and frame?
You can replace the glass if the sash and frame are still structurally sound and still carry current product approval for the opening. If the sash is warped, the hardware is failing, or the original install was not flashed properly into the CBS opening, a straight glass swap leaves the other problems in place. We measure the opening, inspect the frame, and tell you honestly whether a glass replacement or a full sash replacement is the right call. Estimates are free. Call (954) 280-4413.
Call TruePane for Window Installation in Orlando
If you live in an older CBS home in College Park or Conway with original aluminum windows, or you own a vacation rental in the metro and need documented compliance for an insurance file, call TruePane at (954) 280-4413. We’ll measure every opening twice, quote manufacturer lines side by side on paper, pull the Orange County permit, and register both warranty layers before we leave. We stand behind the work with the Done Right Promise. A live person answers the phone 24 hours a day, seven days a week. Call to schedule your free estimate.
Written by Dale Kessler, Owner at TruePane Windows & Doors. Serving Orlando with FPA-compliant window installation, masonry anchoring, and written warranty registration on every job.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.