Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Window Installation Across Tampa
Window installation in Tampa runs $450-$1,400 per opening for standard retrofit work, and $900-$2,800 per opening when you’re pulling the old frame entirely and setting a new-construction unit with impact glazing. We schedule most Tampa jobs within five to ten business days, and our crews know the difference between a Seminole Heights bungalow and a Carrollwood CBS ranch before the truck parks. If you live anywhere from Hyde Park to Temple Terrace, call (954) 280-4413 and a live person answers. That’s not a recording. It’s one of us.
We’re TruePane Windows & Doors. Dale Kessler founded this company on a rule that’s still on the whiteboard: if the pane is not true, the job is not done. We’ve been serving local communities since 2008 through a heritage of craft, and we approach every Tampa home the way the second generation of a glazing family should – carefully, plainly, and with the warranty layers registered in writing before the truck leaves your driveway.
Why TruePane Windows & Doors Is Tampa’s Preferred Window Installation Company
Tampa homeowners call us because we know what salt air does to a window. This city sits at the head of a shallow, funnel-shaped bay, and the same geography that makes the sunsets spectacular also pushes humid, salt-laden air across every west-facing elevation from Beach Park to Bayshore Beautiful. Aluminum frames that would last thirty years in Orlando oxidize and seize here inside a decade. We spec and install accordingly, and that local knowledge shows up in every quote we put on paper.
Our Tampa customers consistently tell us the same thing: the crew showed up when we said, the work was done right, and nobody argued about the bill. That’s The Keystone Standard at work. Both manufacturer warranty layers registered in writing, durations stated, and our Done Right Promise behind every install. If it’s not done right, we make it right – no paperwork fight, no fine print that covers neither.
We’re an authorized installer for more than a dozen manufacturer lines, including, PGT, and CGI. That matters in Hillsborough County, where Florida Building Code wind-load mandates require impact products in most new work, and where private insurers are non-renewing policies on homes with old jalousies or failing single-pane sliders. We quote manufacturer lines side by side on paper so you can see exactly what you’re paying for before you sign anything.
Our Window Installation Services in Tampa
Single & Double Hung Windows
Single and double hung windows are the workhorse replacement for Tampa’s mid-century CBS homes. We do more of these in Carrollwood, Temple Terrace, and South Tampa than any other style, largely because the original single-pane aluminum sliders and jalousies from the 1950s through the 1980s have reached the end of their service life. A standard retrofit single hung with impact glazing in Tampa runs $550-$1,100 per opening. Double hung typically adds $150-$250 per unit. Both come with our Window Installation team’s full warranty registration.
Casement Windows
Casement windows give you the tightest seal against Tampa’s humid air, which is why we recommend them for west-facing walls in waterfront neighborhoods where salt and moisture push hardest. They crank open and seal against the frame with a compression gasket, so there’s no slide track to corrode or jam. In Tampa, a quality casement window with impact glass and marine-grade hardware runs $700-$1,500 per opening installed. The hardware matters more here than in most markets – we specify stainless steel multi-point locks specifically because Tampa’s salt air destroys zinc and plated steel within a few years.
Fixed & Picture Windows
Fixed and picture windows are the best value per square foot of glass, and they’re a strong choice for Tampa homes where you want light and a view without the mechanical complexity of an operable sash. In Tampa, fixed window installation runs $400-$950 per opening for standard sizes, with larger picture units running $1,200-$2,600 depending on glazing spec. South- and west-facing fixed glass in near-bay neighborhoods takes brutal UV punishment, so we specify low-E coatings and argon fill as standard on these exposures, not as an upsell.
Awning Windows
Awning windows hinge at the top and open outward, which makes them practical for Tampa’s afternoon rain patterns – you can leave them cracked for ventilation during a light shower without water pouring in. We install them frequently in kitchens and baths across Odessa, Safety Harbor, and the older sections of Tampa where casement windows won’t clear a walkway or a sink. Expect $500-$1,200 per opening for an awning window with impact glass in Tampa, depending on size and frame material.
Sliding Windows, Bay & Bow, Garden & Basement Windows
We also handle sliding windows, bay and bow window packages, and garden windows for Tampa kitchens. Sliding windows suit the long horizontal openings common in 1960s and 70s CBS construction. Bay and bow windows are a bigger structural job – we see them most often in Hyde Park and Palma Ceia, where older frame homes can accommodate the projection. Garden windows are a popular kitchen upgrade in Seminole Heights bungalows. Tampa pricing for these runs $600-$1,400 for sliders, $2,500-$6,000 for a full bay or bow assembly, and $900-$1,800 for a garden window, depending on size and glazing.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Tampa
We’re an authorized installer for PGT, CGI, ES Windows, and more than a dozen other manufacturer lines, which means we can put a real side-by-side comparison of frames, glass packages, and warranty terms on paper before you commit. For Tampa’s corrosive salt-air environment, we frequently specify CGI and ES Windows for waterfront and near-bay homes because their frame coatings and stainless hardware hold up better under chronic oxidation. We keep a running inventory of common replacement parts for these lines, so a failed balancer or a worn roller on an existing window doesn’t leave you waiting on a backordered component from out of state.
Common Window Installation Problems We See in Tampa Homes
- Corroded aluminum frames from salt air. Tampa Bay’s salt-laden humidity attacks aluminum window frames relentlessly, especially on west-facing elevations in neighborhoods like Bayshore Beautiful and Beach Park. The oxidation pits the metal, seizes the sliding tracks, and eventually makes the window impossible to open or close without breaking the frame.
- Jalousie windows that insurers won’t accept. Those louvered glass jalousies so common in Tampa’s 1960s and 70s CBS homes cannot be retrofitted to meet Florida’s current impact-resistance standards under any method. Insurers have started flagging them explicitly during binding inspections, and some will refuse coverage outright until the units are replaced.
- Binding sashes in historic wood-frame homes. Tampa’s year-round relative humidity above 70% causes wood jambs to swell and sashes to bind in older bungalows across Seminole Heights and Hyde Park. We replace the window, but we also address the rough opening – squaring it, flashing it properly, and setting the new unit so it operates cleanly through every season.
- Failed insulated glass from heat and UV. Tampa’s intense Gulf Coast sun eventually breaks down the seal on insulated glass units, leaving you with fog between the panes and a window that no longer insulates. We see this constantly in south- and west-facing elevations of homes built in the 1980s and 90s, when low-quality sealant compounds were standard in residential windows.
Pricing for Window Installation in Tampa, FL
A standard retrofit window installation in Tampa runs $450-$1,400 per opening for double-hung, sliding, casement, and fixed units. Full frame replacement with a new construction window – which is mandatory when the old frame is rotted or when you’re converting a jalousie opening – runs $900-$2,800 per opening depending on glazing spec. Impact-rated glass adds $300-$700 per unit over standard. If you’re converting original jalousies on a 1960s CBS home, a typical whole-house job of eight to twelve openings runs $9,000-$18,000 all-in, including permits, tapcon anchoring, and marine-grade flashing. Every quote we give in Tampa is line-item, fixed-price, and includes both warranty layers registered in writing. Call (954) 280-4413 to schedule a free estimate – we’ll measure every opening twice and hand you the numbers on paper.
We Also Serve Cities Near Tampa
Our crews work throughout the Tampa Bay area, and we regularly install windows in Safety Harbor, Oldsmar, Odessa, and Dunedin. If you’re in any of those communities – or anywhere else in Hillsborough or northern Pinellas County – you’ll get the same TruePane crew, the same Keystone Standard, and the same warranty registration. We’re proud to be part of the broader Window Installation in Tampa community, and we treat every job in the surrounding cities with the same care we bring to work in Tampa proper.
Serving Tampa, FL - Our Local Coverage Area
We’re based in the Tampa area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Installation in Tampa
Yes, it’s a real risk. Tampa insurers have begun flagging jalousie windows during binding inspections because louvered glass cannot be retrofitted to meet Florida impact-resistance standards under any method, and some carriers will refuse coverage or non-renew a policy outright until those units are replaced with impact-rated windows. If you’ve received a notice from your insurer, call (954) 280-4413 and we’ll walk you through the conversion options and give you a fixed price in writing.
Salt. Tampa sits at the head of a shallow, funnel-shaped bay, and the humid, salt-laden air that moves across the city attacks aluminum far more aggressively than the inland air Orlando gets. The corrosion pockmarks the frame, seizes sliding tracks, and eventually makes the window inoperable. For Tampa homes, we specify marine-grade hardware and frames with superior coating systems, which is why a Tampa-spec window installation often runs $150-$300 more per opening than an inland-spec job – and why the cheap spec fails within a decade here.
Yes, in most cases. Hillsborough County falls under Florida Building Code wind-load mandates that require impact-rated products in new construction and major renovations, and your insurer may require them for any replacement window work at all. On the concrete block (CBS) homes that dominate Tampa’s housing stock, installation also requires tapcon-anchored fin windows rather than wood-frame nailing fins, which is a skill gap that catches out-of-market crews. We anchor every unit correctly and register both warranty layers in writing before the truck leaves your driveway.
A nailing fin is a plastic or metal flange on the outside of a new-construction window that gets nailed to wood framing – standard for frame homes but useless on Tampa’s concrete block (CBS) construction, where there’s no wood stud to nail into. Tapcon anchoring means we drill through the window frame and into the block itself using concrete screw anchors, securing the unit directly to the wall. It’s slower work and requires a masonry drill, which is why many out-of-market crews get it wrong or skip it entirely, leading to windows that shift and leak within a season or two.
Look for fog or condensation between the two panes of glass, especially on south- and west-facing windows that take the brunt of Tampa’s afternoon sun. That haze means the seal has failed and the insulating gas has leaked out, so the window is no longer doing its job. A failed insulated glass unit usually means replacing the entire sash or the entire window depending on the frame condition – and in Tampa we see this constantly on homes built in the 1980s and 90s with original windows. Call (954) 280-4413 for an honest assessment and a fixed price before the Florida humidity makes the problem worse.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Tampa since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.