Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Window Installation Across Tequesta
Window installation in Tequesta, FL is governed by one hard fact that most window companies never mention: because the village spans roughly 2 square miles along the Intracoastal Waterway and the Loxahatchee River estuary, every street in Tequesta sits inside Florida’s wind-borne debris region at design pressures above 160 mph. There is no inland exception here. That means your replacement windows need more than a good brand name. They need impact-rated product approval numbers, site-specific pressure calculations, and documentation your insurance carrier will actually accept after a storm. At TruePane Windows & Doors, we plan every Tequesta installation around that code reality first and the glass second. Call (954) 280-4413 for a straight answer and a free estimate.
Why TruePane Windows & Doors Is Tequesta’s Preferred Window Installation Company
We are not the cheapest bid working the Palm Beach County coast, and that is a deliberate choice. Dale Kessler founded TruePane in 2008 with a rule that still governs how our crews work in Tequesta today: if the pane is not true, the job is not done. That simple standard matters more in Tequesta than almost anywhere else we work. The village’s mix of 1960s-through-1980s concrete block homes, tidal salt air, and 160 mph wind-load requirements means a window that is not set square, not flashed correctly, and not documented properly will fail in ways you will not see until the next hurricane season. Our technicians are background-checked and uniformed, we measure every opening twice, and we register both manufacturer warranty layers in writing before the truck leaves your driveway. We answer the phone when you call, and we have been doing this long enough that many of our Tequesta customers are referrals from neighbors who watched the first install.
Our Window Installation Services in Tequesta
Casement Windows
Casement windows are a common choice in Tequesta for a reason that goes beyond looks. Because the sash presses against the frame and seals on all four sides when closed, casements handle the village’s driven-rain conditions along the Loxahatchee and the Jupiter Inlet better than most double-hungs. In a 160 mph wind zone, that compression seal is doing real structural work. We set casements with full-frame anchoring into the concrete block openings typical of Tequesta’s CBS construction, using fasteners rated for masonry, not wood bucks. If you are replacing original aluminum-frame casements on a 1970s ranch, expect to see the old frames come out entirely. The salt air in this village eats the fasteners long before the glass fails.
Awning Windows
Awning windows are another Tequesta favorite, especially on older homes originally built for passive ventilation before central air conditioning became standard. They hinge at the top and open outward, so you can leave them cracked open during a summer rain shower without water pouring inside. The tradeoff in Tequesta is that awning windows have more moving hardware than fixed units, and the Loxahatchee’s tidal salt air is hard on hinges, handles, and operators. We install awning units with stainless or marine-grade hardware where the manufacturer offers it, and we register the corrosion-protection warranty terms in writing at the time of install. If your existing awnings are aluminum-frame units from the 1980s, the frame is likely as fatigued as the hardware, and a glass-only swap will not pass wind-load inspection.
Fixed & Picture Windows
Fixed and picture windows are the unsung workhorses of Tequesta’s waterfront-facing rooms. Since they do not open, they have no operator hardware to corrode and fewer seal points to fail. That makes them the most wind-load-friendly option on the market, and for many Tequesta homeowners they are the right call for large openings facing the water. The catch is that a large fixed unit in a 160 mph wind zone puts enormous pressure on the frame and the anchoring system. We calculate the design pressure for the specific opening, not just the product line, and we order the glass thickness and frame profile to match. If you want an unobstructed view of the Intracoastal without opening the window, this is the category we discuss most.
Single & Double Hung Windows
Single-hung and double-hung windows are the most common replacement type in Tequesta, and the most commonly botched. Homeowners order double-hung units online or through a contractor who never checks the product approval number against Tequesta’s 160+ mph wind zone. The windows arrive, the installer drops them in, and final inspection fails because the label does not match the permit’s design pressure. We see this repeat every single year. In Tequesta, a compliant double-hung installation means the unit carries a Florida product approval for the exact design pressure at your address, the frame is anchored into the masonry with the correct fastener pattern, and the paperwork matches the permit before the inspector ever arrives. Our Window Installation team handles that sequence start to finish.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Tequesta
We are an authorized installer for more than a dozen manufacturer lines, and for Tequesta’s wind zone we quote a lot of CGI, PGT, and ES Windows. These are Florida products built for the pressures this coastline throws at them. The brand matters less than the documentation it ships with. We quote manufacturer lines side by side on paper so you see exactly what each unit carries: the product approval number, the design pressure rating, the glass package, and the warranty terms. We register both warranty layers in writing before the truck leaves your driveway, and we keep copies of every permit and NOA document on file for when your insurance carrier asks for them. No surprises, no fine print, no arguing.
Common Window Installation Problems We See in Tequesta Homes
- Non-compliant double-hung orders failing final inspection. The homeowner gets a cheap quote, the installer never checks the product approval number against Tequesta’s design pressure, and the permit is stamped “failed” because the label does not match the paperwork. Fixing that after the fact costs more than doing it right the first time.
- Glass-only retrofits into rotted or salt-corroded aluminum frames. The Loxahatchee’s tidal air gets into the fastener holes and the jamb channels. The glass goes in, the sash flexes under wind load, and the seal fails within two seasons. By then the contractor is gone and the warranty is worthless.
- Jalousie wall removal without structural reframing. Removing a full wall of louvered jalousie units and reframing the opening properly is structural work. A contractor who skips the header or the load path leaves the opening too weak to carry an impact-rated unit, and the inspector catches it before the hurricane shutters can be approved.
- Paperwork that never gets registered. A unit with a great warranty is not actually warrantied until the manufacturer receives the registration. We register both layers in writing. If your installer cannot show you the dated registration, you do not have a warranty. You have a receipt.
Pricing for Window Installation in Tequesta, FL
Tequesta’s pricing reflects the code reality: you are not buying glass, you are buying a documented wind-load system. A typical impact-rated single-hung unit in Tequesta runs $900 to $1,600 installed. Casements run $1,100 to $1,900 per unit. Fixed and picture windows run $900 to $1,700, going up with glass area and design pressure. A jalousie wall removal and reframe with two or three impact-rated units typically lands between $3,800 and $6,500, depending on the structural work. The lowest bids we see cut out the permit, the engineering, or the reframing, and that is exactly what fails inspection. We provide a written line-item quote, fixed pricing with no change orders, and we pull the permit ourselves. Tequesta residents also receive our permanent 5% discount for seniors and veterans. Call (954) 280-4413 to schedule your free estimate and see the numbers on paper.
We Also Serve Cities Near Tequesta
TruePane Windows & Doors regularly works in Window Installation in Tequesta and the surrounding communities including Acacia Villas, Alafaya, Altamonte Springs, and Altoona. The wind-load requirements do not get easier just over the village line, and neither does the salt air. If you are within driving distance of the Jupiter Inlet and the Loxahatchee corridor, call us and we will tell you straight what your openings need.
Serving Tequesta, FL - Our Local Coverage Area
We’re based in the Tequesta area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Installation in Tequesta
Every replacement window in Tequesta must meet the Florida Building Code’s wind-borne debris requirements for a design wind speed of 160 mph or higher, depending on the exact address and exposure. Because the entire village sits inside the wind-borne debris region, there is no address in Tequesta that is exempt. The specific design pressure for your opening is calculated from the window’s size, location on the wall, and exposure category. Your permit must show that number, and the window’s product approval must match it. Call (954) 280-4413 and we will pull the exact design pressure for your address before you spend a dollar on glass.
In most Tequesta homes from the 1970s and 1980s, full-frame replacement is required to pass inspection. The original aluminum frames on CBS ranch and split-level homes are typically too corroded from salt air to carry impact-rated glazing, and the fasteners will not hold the required wind-load anchoring. A glass-only retrofit into a weakened frame will not pass the site-specific pressure calculation the permit requires. If your frames are in genuinely sound condition and the opening is not in a high-exposure position, an insert installation may be possible, but we will not know until we measure and inspect the jambs. Our estimators check this before quoting, not after tear-out.
Jalousie windows cannot be repaired to meet current code in Tequesta, and they are no longer insurable as-is under most Florida homeowners policies. The louvered glass and thin frames were built for passive ventilation before air conditioning, and they do not meet any wind-borne debris requirement. The full wall of jalousies must be demolished, the opening reframed with a proper header and load path, and impact-rated units installed. On Seabrook Road, our crew pulled a 1970s CBS ranch’s original aluminum jalousie wall where the salt air had eaten through the jamb screws, reframed the opening for two impact-rated single-hung units with Low-E argon-filled glass, and delivered the Miami-Dade NOA paperwork the inspector required with the permit. That is the standard scope, and it is not a quick glass swap. Call (954) 280-4413 and we will walk you through what your specific openings need.
Documented compliance is what determines whether your claim gets paid without a fight. If your windows carry a product approval number that matches the permit’s design pressure, and the installation passed inspection, your insurance carrier has no grounds to deny a claim on the basis of non-compliant fenestration. If the paperwork is missing or the label does not match the permit, the carrier can argue the opening was not code-compliant and reduce or deny the claim. We register both warranty layers in writing and keep copies of the NOA, the permit, and the inspection sign-off. You get a documented wind-load rating for every opening, and your insurance file gets exactly what it needs.
Yes. Impact-rated windows in Tequesta almost always ship with Low-E coatings and argon-filled insulated glass, which means they are doing two jobs at once: meeting the wind-load code and cutting the heat gain that pushes your air conditioning bill up from May through October. Replacing original single-pane aluminum windows on a 1970s Tequesta ranch typically cuts solar heat gain through the glass by half or more, and the tighter seal reduces the humid air leaking in from the estuary. The code compliance is the legal reason to replace them; the lower electric bill is what you notice every month after. Call (954) 280-4413 for a free estimate with real numbers for your home.
Contact TruePane Windows & Doors for Window Installation in Tequesta, FL
If you live in Tequesta, the decision is not about finding the cheapest window. It is about finding a company that will document the wind-load rating, pull the permit, pass the inspection, and still answer the phone when your insurance carrier wants the paperwork five years later. That is the work we do. A live person answers our phone 24 hours a day, seven days a week, and we will talk through the scope of your job before we ever schedule a visit. Call (954) 280-4413 for a free estimate and a written quote that shows exactly what you are buying. Dale Kessler and the TruePane crew have been doing this work for a long time, and we plan to keep doing it in Tequesta for the next thirty years.
Written by Dale Kessler, Owner at TruePane Windows & Doors.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.