Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Window Replacement Across Juno Beach
Window replacement in Juno Beach runs $900-$3,400 per opening for most homes, with impact-rated coastal units starting around $1,200 and full-frame tear-outs on oceanfront properties often reaching $6,800 or more depending on framing condition. That’s the honest range before anyone walks your house. TruePane Windows & Doors has served this stretch of the Atlantic barrier island long enough to know the difference between a straightforward insert and a full-frame job that’s hiding corroded jambs behind 1970s stucco. Call (954) 280-4413 for a free estimate, and a live person answers. No voicemail tree.
We work in Juno Beach every week. We know the condominium corridors along A1A, the concrete block homes west of Donald Ross Road, and the oceanfront lots where salt spray eats aluminum frames within a few seasons. If you’re replacing windows here, the spec conversation starts with coastal code and turtle ordinance compliance before anyone talks about style.
Key Takeaways:
- Impact-rated windows are not optional in Juno Beach. Palm Beach County’s elevated coastal wind-speed design requirements make Florida Product Approval-certified units the baseline.
- May through October changes your glass spec. Juno Beach’s sea turtle lighting ordinance restricts what light can escape ocean-facing windows after dark.
- Salt air is not a cosmetic issue. Non-marine-grade hardware fails within a few years this close to the Atlantic.
- Older homes hide framing problems. 1960s-1980s concrete block houses often have no flashing tape behind the stucco and jambs that disintegrate on removal.
Why TruePane Windows & Doors Is Juno Beach’s Preferred Window Replacement Company
We’re not a franchise operation with a rotating cast of subcontractors. Dale Kessler founded TruePane in 2008 as a second-generation glazier who was tired of seeing out-of-true installs and voided warranties passed off as finished work. That founding rule still governs our Juno Beach jobs: if the pane is not true, the job is not done.
Juno Beach homeowners tend to stay put. Many have lived in the same house for twenty or thirty years, and they remember the contractor who left them with a fogged seal and a door that binds in July. The condominium owners along A1A have the added layer of association approvals and high-floor wind-load specifications. We’ve worked through those boards and those specs enough times that the process doesn’t stall out.
Every crew member is background-checked, uniformed, and trained in measure-twice discipline. We quote manufacturer lines side by side on paper so you see exactly what you’re buying, and we register both warranty layers in writing before the truck leaves. No arguing. No fine print that covers neither. This is our standard, and we put it on every Juno Beach job. Our Window Replacement in Juno Beach work is backed by the Done Right Promise. If it’s not done right, we make it right.
A live person answers the phone 24 hours a day, 7 days a week. That matters when you’re a retired homeowner in Juno Beach with a window that won’t latch and a storm forming off the coast.
Our Window Replacement Services in Juno Beach
Full Frame Replacement
For 1960s-1980s concrete block homes in Juno Beach, full-frame replacement is often the only honest option. The original aluminum jalousie and single-pane slider frames weren’t designed for impact glazing, and the wood bucks behind them are frequently rotted or-worse-never flashed. A full-frame job means removing everything down to the rough opening, repairing or replacing the framing, taping and flashing properly, and setting a new impact-rated unit that will actually pass a Palm Beach County coastal wind inspection. In oceanfront homes near Juno Dunes, we add AAMA 2605-rated finishes and marine-bronze hardware as standard practice, not an optional upgrade. Expect $2,100-$6,800 per opening depending on what we find behind the stucco.

Insert Window Replacement
When the existing frame is square, sound, and correctly flashed, an insert replacement keeps the job cleaner and cheaper-$900-$2,400 per opening in most Juno Beach homes. Condominium units along A1A often require inserts because full frame work would disturb the exterior cladding and trigger costly facade remediation. But here’s the catch: many 1960s-1980s houses in Juno Beach were never flashed to modern standards, so the “frame is fine” assumption has to be verified, not assumed. We inspect the rough opening before we quote an insert, not after we’ve ordered glass.

Storm Window Replacement
Storm windows in Juno Beach mean impact-rated glazing that meets Miami-Dade and Palm Beach County coastal wind-speed design pressures. This isn’t an add-on. It’s the code baseline for any replacement window within the wind-borne debris region, which includes every address between US-1 and the beach. We install PGT, CGI, and CWS impact units regularly, and we walk each customer through the Florida Product Approval number for their specific size and configuration. If a unit fails inspection because it wasn’t certified for your exact opening dimensions, that’s a problem we prevent on the front end, not after the inspector leaves.

Energy-Efficient Upgrade
Energy-efficient glazing in Juno Beach gets complicated in a way it doesn’t two miles inland in Palm Beach Gardens. The same low-emissivity coatings that cut solar heat gain also affect visible light transmittance-the VLT number-and during turtle nesting season from May through October, that number matters. Ocean-facing windows with clear, high-VLT glass let interior white and blue-spectrum light shine onto the beach, which violates Juno Beach’s turtle lighting ordinance. We routinely spec amber-tinted, low-VLT, or interior-blackout-capable glazing on ocean-facing elevations, and we explain the trade-off between energy performance and code compliance in plain language before you choose a glass package. Most Juno Beach upgrades run $1,400-$3,600 per opening for low-E impact units.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Juno Beach
TruePane is an authorized installer for more than a dozen manufacturer lines, and our Window Replacement team works regularly in Juno Beach with Ply Gem, PGT, and CGI product lines. We quote manufacturer options side by side on paper, with warranty durations stated in writing, so you can compare a PGT impact unit against a CGI equivalent without guesswork. Since we’re scheduling Juno Beach jobs every week, we don’t leave a customer waiting on a backordered sash or a missing mullion kit. The unit is ordered, tracked, and staged before the truck pulls up.
Common Window Replacement Problems We See in Juno Beach Homes
- Salt-spray corrosion on aluminum frames and hardware. Direct Atlantic exposure with no inland buffer means Juno Beach properties get some of the highest salt-spray concentrations on Florida’s east coast. Non-marine-grade sash locks seize, jamb screws snap during removal, and aluminum frames pit and oxidize within a few seasons. We spec AAMA 2605-finished frames and stainless or marine-bronze hardware as standard practice on any oceanfront or ocean-view home.
- Original single-pane sliders that fail coastal wind code. The 1960s-era aluminum windows common in Juno Beach’s concrete block homes were never impact-rated, and they don’t come close to meeting Palm Beach County’s elevated wind-speed design requirements. A storm that skirts offshore is all it takes to put water in a living room through an original slider.
- Missing flashing tape behind the stucco. On a 1970s home a block from the dune line, our crew found no flashing tape behind the stucco around the original aluminum jalousie windows. The rough openings were raw block with a bead of caulk, and the jamb screws disintegrated during removal. If you’re tearing out original frames in a home from the 1960s-1980s, expect framing and waterproofing deficiencies. We write discovered repairs into the contract as a line-item allowance, priced and approved in writing before we touch the wall, and we pull permits and pass inspections on every full-frame job.
- Turtle ordinance violations from replacement glass with high VLT. Between May and October, Juno Beach enforces a lighting ordinance that prohibits ocean-facing windows from transmitting disorienting white or blue-spectrum light visible from the beach. Homeowners who install clear insulated glass without accounting for VLT can end up with a code violation on their hands and an emergency call to us for re-tinting or added interior blackout shades.
Pricing for Window Replacement in Juno Beach, FL
Here’s the real cost picture for this market. A typical insert replacement in a Juno Beach single-family home runs $900-$2,400 per window. A full-frame impact-rated replacement starts around $1,200 for a small fixed window and runs up to $6,800 or more for a large oceanfront opening that requires framing repair, flashing work, and marine-grade hardware. Condominium work on mid-rise buildings along A1A adds complexity: association approval cycles, high-floor glazing requirements, and interior-access installations that can add 15-30% over ground-floor pricing.
| Window Type | Typical Juno Beach Range (Per Opening) |
|---|---|
| Insert replacement (non-impact) | $900-$2,400 |
| Impact-rated insert | $1,500-$3,200 |
| Full-frame impact replacement | $2,100-$6,800 |
| Energy-efficient low-E impact | $1,400-$3,600 |
Every Juno Beach estimate is free and written with line-item pricing. No change orders without your signature. No surprise line items on the final bill. Call (954) 280-4413 and we’ll walk the house with you, inspect the openings, and give you a number that means something.
We Also Serve Cities Near Juno Beach
For homeowners in surrounding communities, we cover Acacia Villas, Alafaya, Altamonte Springs, and Altoona with the same crews and the same standard. TruePane coordinates scheduling and dispatch from our South Florida office, with crews working locally across Palm Beach County and adjacent service areas. If you’re in one of those communities, we’ll get a crew to you just as readily as we do in Juno Beach.
Serving Juno Beach, FL - Our Local Coverage Area
We’re based in the Juno Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Replacement in Juno Beach
Yes. From May through October, Juno Beach enforces an ordinance that prohibits ocean-facing windows from transmitting disorienting white or blue-spectrum light visible from the beach. That means replacement windows on ocean-facing elevations of homes and condominiums need glass with low visible light transmittance, amber tint, or interior blackout capability. We walk every customer through VLT values and spec the glazing accordingly. If you’re not sure whether your elevation is affected, call (954) 280-4413 and we’ll tell you what the ordinance means for your specific windows.
Juno Beach falls within Palm Beach County’s elevated coastal wind-speed design requirements, which exceed the inland baseline. Replacement windows must be impact-rated and carry Florida Product Approval certification for the exact size and configuration installed. We quote PGT, CGI, and CWS impact units with the relevant Florida Product Approval numbers listed on your written quote so there’s no ambiguity at inspection.
Direct Atlantic exposure with no inland buffer means Juno Beach properties see among the highest salt-spray concentrations on Florida’s east coast. Non-marine-grade aluminum oxidizes, pits, and loses structural integrity within a few years, and standard hardware seizes or snaps. The fix is AAMA 2605-rated frame finishes and stainless or marine-bronze hardware, which we spec as standard practice on oceanfront and ocean-view work rather than as an upgrade. This is one of the biggest differences between a Juno Beach job and the same window in an inland town.
Sometimes you can get an insert. Many 1960s-1980s concrete block homes in Juno Beach were never flashed properly at the rough opening, so an insert only works when the existing frame is square, rot-free, and correctly waterproofed. We inspect every opening before quoting, and if full-frame is the honest answer, we’ll tell you. Full-frame impact replacement for these homes runs $2,100-$6,800 per opening depending on what’s behind the stucco.
The ordinance restricts visible light that can shine from your interior onto the beach during nesting season, which means your glazing’s VLT-visible light transmittance-has to be low enough to keep your interior lighting from reaching the dune. Ocean-facing elevations typically need amber-tinted or low-VLT low-E glass, or an interior blackout treatment that’s compatible with your window style. We explain the VLT trade-offs for energy performance and code compliance before you commit to a glass package, so you’re not re-tinting or adding shades after the fact. Call (954) 280-4413 for a free estimate and we’ll walk you through it.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Juno Beach and surrounding communities.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After