Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Window Replacement Across Jupiter Inlet Colony
Window replacement in Jupiter Inlet Colony is not a standard Palm Beach County job. The convergence of the Atlantic Ocean, Jupiter Inlet, and the Intracoastal Waterway means salt-laden air attacks window hardware and frames from every direction at once, corroding standard aluminum in just a few years. Most homes here need impact-rated glazing specified for marine conditions, not the inland spec sold across most of the county. TruePane Windows & Doors has been replacing windows on this narrow barrier island long enough to know which materials survive and which ones fail early. Call (954) 280-4413 for a straight answer and a free estimate.
Why TruePane Windows & Doors Is Jupiter Inlet Colony’s Preferred Window Replacement Company
We work in Jupiter Inlet Colony the way we would work in our own mother’s house: measure twice, specify the right material for the salt, and stand behind the job in writing. Dale Kessler founded TruePane on a rule that still names the company: if the pane is not true, the job is not done. That standard travels with every crew we send to the inlet.
Homeowners here tend to have lived in their houses for two decades or more. They remember the contractor who left them with a fogged seal and a door that binds in July. They are not shopping for the cheapest bid. They want the work done right the first time by a company that will still answer the phone five years later. That is who we are. Our uniformed, background-checked technicians arrive on time, quote manufacturer lines side by side on paper, and register both warranty layers before the truck leaves the driveway.
We recently replaced a set of 1960s jalousie windows on Lighthouse Drive with full-frame, impact-rated casements from Andersen with fusion-welded frames and stainless-steel hardware. The original aluminum sash tracks had corroded so badly from inlet salt spray that the jamb screws snapped during removal. The homeowners had repainted the frames twice in five years to hide the white oxidation. Once we sealed the new openings with flashing tape and installed low-E glass with argon fill, the house stopped leaking air and the locks finally turned smoothly. That is the difference between a window job done for the code and one done for the inlet.
Our Window Replacement Services in Jupiter Inlet Colony
Full Frame Replacement
Full frame replacement is the most common job we do on Jupiter Inlet Colony because so many homes still carry original 1950s through 1970s framing. We remove the entire existing window down to the rough opening, repair or replace any rotted or corroded framing, and set a new impact-rated unit with marine-grade flashing. A typical full frame replacement in Jupiter Inlet Colony runs $1,200 to $3,800 per opening depending on size, manufacturer, and whether the existing opening needs structural repair. For houses on Beach Road or Lighthouse Drive where salt exposure is constant, full frame is usually the only way to get a clean, square, watertight opening.
Storm Window Replacement
Storm window replacement on a barrier island means impact-rated glazing that meets Florida Product Approval standards for the high-wind, wind-borne debris region. Homes on Jupiter Inlet Colony cannot take the inland compromise. We install impact windows from PGT, CGI, and ES Windows, most with stainless-steel hardware and anodized or PVC-clad frames as the baseline. Storm window replacement here typically runs $900 to $2,500 per opening. The price reflects marine-spec materials that will not corrode within five years.
Energy-Efficient Upgrade
Homes on this barrier island run air conditioning nearly year round, and single-pane aluminum windows from the 1960s and 1970s let conditioned air escape constantly. Replacing them with low-E, argon-filled impact glass cuts cooling load and stops salt-laden humidity from fogging the glass and eroding interior finishes. Energy-efficient upgrades in Jupiter Inlet Colony run $800 to $2,200 per window depending on glass package and frame material. The savings show up on the FPL bill and in rooms that stop feeling damp in August.
Insert Window Replacement
For homes with structurally sound frames and newer construction, insert replacement sets a new window into the existing opening without full tear-out. This works well for some of the newer custom homes on the inlet where the rough opening is square and the existing flashing is intact. Insert replacement here runs $700 to $1,800 per window. We will tell you plainly if your existing frames are too far gone for an insert. On this inlet, salt often decides the answer before we do.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Jupiter Inlet Colony
We are an authorized installer for more than a dozen manufacturer lines, including, PGT, CGI, and ES Windows. For Jupiter Inlet Colony specifically, we recommend CGI, ES Windows, and PGT with stainless-steel hardware and anodized or PVC-clad frames. These manufacturers build for coastal exposure, and we register both warranty layers in writing before the truck leaves your driveway. We also service existing windows from CWS and ECO Window Systems when a repair is the right call.
Common Window Replacement Problems We See in Jupiter Inlet Colony Homes
- Corroded sash tracks and locking hardware. Salt spray from multiple directions corrodes standard aluminum sash tracks and locking hardware within two to four years, causing windows to stick, jam, or fail to secure properly. We see this on even recently installed windows that were not specified for marine conditions.
- Fogged insulated glass units. Jalousie and single-pane aluminum windows from the 1950s through 1970s lack impact-rated glazing and often have failed seals that let humid, salt-laden air inside the home, fogging the glass and eroding interior finishes. Once the seal fails, the unit cannot be restored and must be replaced.
- Clogged weep holes. Weep holes at the bottom of standard frames clog with salt and sand from constant tidal wind, trapping water inside the frame and accelerating corrosion of metal components and fasteners. We see this most often on ocean-facing and inlet-facing elevations.
- Stuck or seized jalousie operators. The original jalousie windows common in 1950s and 1960s inlet homes were never built for this salt load. Operators seize, glass panes rattle, and the aluminum frames oxidize until the windows no longer close tightly. Full-frame replacement is usually the only permanent fix.
Pricing for Window Replacement in Jupiter Inlet Colony, FL
The cheap spec costs more within a decade. An aluminum impact window with standard hardware installed here today will show corrosion at the tracks and locks within two to four years. Replacing it later means paying twice: once for the wrong window, once for the right one. The price gap between coastal-spec and inland-spec is usually 15 to 30 percent per opening. On this inlet, the coastal spec is the only spec that makes sense. Call (954) 280-4413 for a written, line-item quote. Estimates are free, and the price we quote is the price you pay.
We Also Serve Cities Near Jupiter Inlet Colony
TruePane serves homeowners across the inlet region, including Acacia Villas, Alafaya, Altamonte Springs, and Altoona. If you are in one of those communities and need Window Replacement done right, call us. Our crews know this stretch of the coast, and we bring the same marine-grade material standards to every job. Learn more about our work in Jupiter Inlet Colony or call (954) 280-4413.
Serving Jupiter Inlet Colony, FL - Our Local Coverage Area
We’re based in the Jupiter Inlet Colony area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Replacement in Jupiter Inlet Colony
Why do standard impact windows from other Palm Beach County towns corrode faster on Jupiter Inlet Colony?
Standard impact windows sold across Palm Beach County corrode faster here because Jupiter Inlet Colony sits at the convergence of the Atlantic Ocean, Jupiter Inlet, and the Intracoastal Waterway, so salt-laden air attacks window hardware and frames from every direction simultaneously. Standard aluminum sash tracks and locking hardware can show corrosion within two to four years. The fix is anodized or PVC-clad frames and stainless-steel hardware, specified as a baseline, not an upgrade. Call (954) 280-4413 and we will show you the material difference in writing before you buy.
Can I replace just the glass in my old jalousie windows and keep the frames?
You can, but on Jupiter Inlet Colony it rarely makes sense. The original aluminum frames from the 1950s through 1970s are already corroding, and the jalousie design was never built for impact or salt load. Replacing just the glass leaves you with the same leaky, non-impact-rated frame. In most cases, full-frame replacement with an impact-rated window is the better long-term call. We will give you an honest recommendation, and the estimate is free.
What type of hardware should I insist on for windows in Jupiter Inlet Colony?
Insist on stainless-steel hardware and anodized or PVC-clad frames. Standard aluminum hardware corrodes within a few years at this inlet location. Stainless steel holds up to the salt load. Many HOA-era renovation permits here require documentation of corrosion-resistant ratings before approval. We specify stainless hardware on every window we install on the island.
How do I know if the seal on my insulated glass unit has already failed from the salt air?
You will see fog or condensation between the panes that you cannot wipe away. The glass may also look hazy or have a white film along the edges. Once the seal fails, the insulating gas escapes and the unit cannot be restored. It must be replaced. We see failed seals on inlet homes with windows installed as recently as eight to ten years ago, especially on ocean-facing elevations.
Do HOA rules in Jupiter Inlet Colony require special documentation for window replacement?
Most Jupiter Inlet Colony HOAs require architectural review approval before window replacement, and many require documentation that the replacement windows meet Florida Product Approval for impact and that the materials are corrosion-resistant. We handle that paperwork as part of the job, including warranty registration and permit documentation. Call (954) 280-4413 and we will walk you through what your specific HOA requires.
Call TruePane Windows & Doors for Window Replacement in Jupiter Inlet Colony
If your windows are sticking, fogging, corroding, or simply past their useful life, call (954) 280-4413. We will send a uniformed, background-checked technician to your home in Jupiter Inlet Colony, measure every opening twice, and quote your options on paper. The Done Right Promise and The Keystone Standard cover every job. A live person answers the phone 24 hours a day, 7 days a week. Free estimates. Written line-item pricing. No surprises on the bill.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Jupiter Inlet Colony and the surrounding inlet communities.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After