Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Window Replacement Across Ocean Ridge
Window replacement in Ocean Ridge runs $900-$3,400 per opening depending on whether you’re swapping a jalousie for an impact-rated casement or doing a full-frame tear-out on an original 1950s CBS rough opening. Most single-family homes here need full-frame replacement, not inserts, because the original openings were sized for jalousies and rarely meet current Palm Beach County wind-load requirements. We serve every street from Tropical Drive up the barrier island to the Boynton Inlet, and we answer the phone when you call: (954) 280-4413.
Why TruePane Windows & Doors Is Ocean Ridge’s Preferred Window Replacement Company
We’ve worked on enough Ocean Ridge homes to know what’s waiting behind the old jalousie frames: rusted steel lintels, crumbling masonry around the jambs, and rough openings that were never built for modern impact-rated units. That’s the difference between a bid that holds and one that doubles after the first wall comes open. Dale Kessler founded this company on a rule that still governs every install: if the pane is not true, the job is not done.
Our Window Replacement crews are background-checked and uniformed, and they measure every opening twice before the first quote is written. We register both manufacturer warranty layers in writing before the truck leaves your driveway. That’s The Keystone Standard, and it’s backed by our Done Right Promise: if it’s not done right, we make it right. No paperwork fights, no arguing.
Ocean Ridge homeowners call us because they’ve been burned before, usually by a mainland contractor who didn’t understand salt air. We’re the second call, the one that fixes the first one. Serving Ocean Ridge means knowing that standard anodized aluminum tracks on sliders rust shut within two or three seasons on the ocean-facing side. It means figuring that into the quote from day one, not tacking on a “marine upgrade” after the contract is signed.
Our Window Replacement Services in Ocean Ridge
Most of what we do in Ocean Ridge falls into three categories: full-frame replacements on original CBS openings, impact-rated upgrades on older single-pane sliders and jalousies, and energy-efficient retrofits for homeowners who want lower cooling bills in a climate where the air conditioner runs ten months a year. Here’s how each one works.
Full Frame Replacement
Full-frame replacement means removing the old window down to the rough opening and rebuilding from there. In Ocean Ridge, this is the standard, not the exception. CBS homes built between the 1950s and 1970s have openings sized for jalousies and aluminum sliders, not for modern impact-rated casements. You cannot slide an insert into a jalousie opening and call it done. We reframe, flash, and seal every new unit so the window moves with the structure and sheds water the way the building code requires.
Insert Window Replacement
Insert replacement fits a new window into the existing frame, provided that frame is square, structurally sound, and deep enough to accept an impact-rated unit. In Ocean Ridge, we see inserts work best on properties that were renovated once already and have relatively recent framing. If your home still has original 1960s aluminum frames with jalousie hardware, an insert almost always hides problems we’d rather fix than cover. We’ll tell you honestly which route makes sense for your openings.
Storm Window Replacement
Ocean Ridge sits in Palm Beach County’s Wind-Borne Debris Region. Impact-rated glazing is a code requirement on every replacement, not an option. Storm window replacement here means upgrading from single-pane jalousies or clear single-pane sliders to impact-rated units that carry the proper Miami-Dade or Florida Product Approval. We quote PGT WinGuard and CGI SENTINEL frames side by side on paper so you see exactly what each line offers and what the warranty covers.
Energy-Efficient Upgrade
On a barrier island where humidity sits above 70 percent most of the year, low-E glass and argon-filled insulated units do more than cut cooling bills. They reduce condensation that breeds mildew on interior sills and keeps double-salt air from working its way into the wall cavity. A full energy-efficient upgrade in Ocean Ridge typically runs $1,200-$2,800 per opening depending on frame material and glass package. For older single-pane homes, the cooling savings alone often pays back within six to eight years.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Ocean Ridge
We are an authorized installer for more than a dozen manufacturer lines, and in Ocean Ridge we lean on CGI, PGT, and ES Windows for almost every coastal job. Those three brands build frames and hardware that hold up to two-sided salt exposure better than most anything else on the market. We quote manufacturer lines side by side on paper, so you see the frame material, glass package, wind-load rating, and warranty duration for each option before you sign. No guesswork.
Common Window Replacement Problems We See in Ocean Ridge Homes
- Rusted tracks and sash hardware. Marine air from the Atlantic and the Intracoastal hits every home from both sides. Aluminum tracks on sliders bind and lock up within two to three seasons on east-facing exposures. The Intracoastal side is only slightly more forgiving.
- Undersized CBS rough openings. Concrete block openings from the 1950s through the 1970s were built for jalousies. A modern impact-rated unit won’t fit properly without reframing, and forcing one in distorts the frame and leaks at the jamb.
- Rusted steel lintels above window openings. When we pull old jalousie frames, we regularly find corroded lintels that need repair before a new window can bear properly. A naive quote misses this. Ours accounts for it.
- Single-pane glass that fails wind-load code. Original jalousies and single-pane sliders don’t meet current Florida Building Code wind-load or wind-borne debris requirements. Replacing them without upgrading to impact-rated glazing is non-compliant and unsafe in a hurricane.
Pricing for Window Replacement in Ocean Ridge, FL
Here’s what Ocean Ridge homeowners should budget for, per opening, including materials, labor, and standard flashing:
- Impact-rated insert window: $900-$1,700
- Full-frame impact window in an existing CBS opening: $1,400-$2,400
- Full-frame impact window with lintel repair or masonry rebuild: $2,200-$3,400
- Energy-efficient upgrade with low-E insulated glass: $1,200-$2,800
What moves the number is what we find behind the old frame. A rusted lintel, a crumbling jamb, or an opening that’s an inch too shallow all change the scope. We write allowances into the contract for exactly this reason, and any surprise is priced and approved in writing before we touch it. Call (954) 280-4413 to schedule your free estimate. That estimate is a fixed, written price, not a placeholder.
We Also Serve Cities Near Ocean Ridge
Our window replacement crews work throughout the coastal corridor and inland communities, including Acacia Villas, Alafaya, Altamonte Springs, and Altoona. If you’re outside Ocean Ridge proper, call (954) 280-4413 and we’ll confirm coverage for your address. Dispatch and scheduling coordinate from our South Florida office; the crews that show up are the same local crews that work wherever you are.
Serving Ocean Ridge, FL - Our Local Coverage Area
We’re based in the Ocean Ridge area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Replacement in Ocean Ridge
Ocean Ridge is a narrow barrier island, so the Atlantic is east and the Intracoastal is west. Salt-laden air reaches your home from both directions. The Intracoastal side gets slightly less direct salt spray, but still enough airborne chloride to corrode standard anodized aluminum tracks within a few seasons. The fix is marine-grade stainless-steel or brass hardware and aluminum-clad frames from lines like PGT WinGuard or CGI SENTINEL. That’s the only way we spec ocean-facing and Intracoastal-facing openings here. Call (954) 280-4413 for an exact quote on your openings.
Usually not. Jalousie rough openings in Ocean Ridge’s CBS homes are narrower and shallower than what a modern impact-rated casement or slider requires. In most cases the opening needs to be enlarged and reframed, and the surrounding masonry repointed. We have done this on hundreds of mid-century CBS homes here, including jalousie-to-casement conversions where we pack new flashing tape around the full perimeter to keep double-salt air out of the wall cavity. Call (954) 280-4413 and we’ll tell you what your specific openings need.
Only if the new slider is impact-rated, installed into a properly reframed and flashed opening, and carries the required Florida Product Approval documentation. A single-pane non-impact slider will not pass. Palm Beach County’s Wind-Borne Debris Region rules apply to every replacement window and door on the island, no exceptions. We pull permits, schedule inspections, and register both warranty layers in writing before the truck leaves the driveway. Call (954) 280-4413 to talk through your project.
A full-frame replacement removes the window down to the rough opening and replaces the frame, flashing, and everything around it. An insert window fits a new unit inside the existing frame. In most Ocean Ridge CBS homes from the 1950s through the 1970s, full-frame is the only code-compliant route because the original openings were built for jalousies, not modern impact units. Inserts work best on homes that have already been renovated once and have sound, square, recent framing. We’ll tell you which one your house needs before you spend a dollar. Call (954) 280-4413 for a free on-site look.
Yes. Low-E coated glass rejects solar heat gain, which matters when your air conditioner runs most of the year. But the bigger benefit here is condensation control. In Ocean Ridge’s humidity, single-pane glass sweats on the interior side, and that moisture feeds mildew on sills and trim. A properly sealed insulated unit with a low-E coating reduces that condensation and keeps humidity-driven rot from working through the wall cavity. The salt air doesn’t care about your glass package; the frame and hardware are what need to be marine-grade. Call (954) 280-4413 for a fixed, written quote on your openings.
Contact TruePane Windows & Doors in Ocean Ridge
If you own a mid-century CBS home in Ocean Ridge and you’re tired of windows that rattle in a storm or sliders that bind from rust, call (954) 280-4413 to schedule your free estimate. A live person answers, 24/7. We quote in writing, we register both warranty layers before we leave, and we stand behind every install with the Done Right Promise. No voicemail trees, no callbacks forms, no surprises.
Written by Dale Kessler, Owner at TruePane Windows & Doors.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.