Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterThe Double-Sided Salt Problem: Why Window Replacement in Redington Shores Is Different
Redington Shores sits on one of the narrowest barrier island strips in Pinellas County. The Gulf of Mexico beats on the west side. Boca Ciega Bay works the east. That means every window frame, every piece of hardware, every seal on your house gets hit from both directions by salt air. We see it constantly on Redington Shores jobs: aluminum frames pitted and corroded within a decade, sashes that bind in the track, fogged glass where the seal gave out after just a few hurricane seasons. Window replacement here is not the same job as it is ten miles inland. The materials have to be chosen for salt survival, not just curb appeal. Call (954) 280-4413 and we’ll walk you through what actually holds up on the island.
Why TruePane Windows & Doors Is Redington Shores’s Preferred Window Replacement Company
Dale Kessler founded TruePane in 2008 on a rule he still keeps on the whiteboard: if the pane is not true, the job is not done. That standard has kept us in Redington Shores homes for years now, replacing windows in beach cottages off Gulf Boulevard and ranch homes back toward the Intracoastal. Our crews know what a 1960s CBS wall does when you try to pull a jalousie frame out of it. We know which manufacturers’ impact glazing passes Pinellas County permitting without a fight. And we know the difference between a window that will last on this island and one that will not. Our Window Replacement team is background-checked, uniformed, and trained to measure every opening twice before quoting a single line item. We register both manufacturer warranty layers in writing before the truck leaves your driveway. A live person answers the phone 24 hours a day, seven days a week. Not a voicemail tree, not a callback form.
Our Window Replacement Services in Redington Shores
Full Frame Replacement
Full frame replacement means pulling the entire window, jamb and all, down to the rough opening. On Redington Shores homes this is usually the right move for original jalousies or single-pane aluminum sliders that have been in the wall since the 1960s or 1970s. We cut the solid block carefully, reframe the opening square, and set a fusion-welded vinyl or marine-grade aluminum window with impact glazing. The old window is gone, the flashing is new, and the opening is sealed against the double-sided salt air.
Insert Window Replacement
If your existing frames are still square and structurally sound, an insert replacement keeps the old frame in place and sets a new sash and glass unit inside it. In Redington Shores we are honest about when this works and when it doesn’t. Frames that have been corroding from Gulf and bay exposure for forty years are often too far gone to save. We’ll tell you straight, and we’ll quote both options side by side on paper so you can see the numbers yourself.
Storm Window Replacement
Storm windows on a barrier island are not an accessory. They’re a line of defense. Whether you’re replacing damaged storm panels or adding exterior storm windows to protect newer impact glazing from sand and salt spray, we spec marine-grade aluminum frames and stainless hardware. Anything less rusts and binds within a few seasons. The salt in Redington Shores does not take a day off.
Energy-Efficient Upgrade
Most mid-century Redington Shores cottages leak air through original window openings that were never sealed properly. That means your air conditioner works harder from May through October, and your power bill shows it. A Modern energy-efficient upgrade, typically a low-E insulated glass unit with argon fill, cuts radiant heat transfer and blocks UV that fades furniture. We’ve pulled original jalousies out of beach cottages where the indoor temperature at the window was ten degrees hotter than the center of the room. The upgrade pays for itself in Pinellas County’s climate faster than most folks expect.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Redington Shores
We are an authorized installer for more than a dozen manufacturer lines, and on Redington Shores jobs we lean on PGT, CGI, and Ply Gem most often. PGT and CGI build impact-rated lines engineered for Florida’s Wind-Borne Debris Region. Ply Gem gives us a solid vinyl option for budget-conscious energy upgrades. We stock parts and hardware locally, and when a Redington Shores homeowner calls about a failed sash or a fogged unit, we can usually get the replacement rolling without waiting on a regional warehouse. A square deal means quoting brand lines side by side on paper so you see exactly what you’re buying.
Common Window Replacement Problems We See in Redington Shores Homes
- Bidirectional salt corrosion: Few places in Pinellas County get hit from two sides the way Redington Shores does. The Gulf on the west and Boca Ciega Bay on the east mean aluminum frames and steel hardware corrode roughly twice as fast as they would in Largo or Seminole. We specify marine-grade aluminum or fusion-welded vinyl with stainless hardware on nearly every job here.
- Fogged insulating glass units: Salt moisture accelerates seal failure in double-pane windows. Once the seal lets go, argon leaks out and condensation forms between the panes. On the barrier island this happens after just a few hurricane seasons, not the fifteen or twenty years you might get inland.
- Jalousie windows in solid block walls: The 1950s-1970s concrete block cottages in Redington Shores were commonly built with louvered jalousie windows. They leak air and water around unsealed rough openings, invite mold in the high-humidity island climate, and get flagged immediately on any Pinellas County renovation permit. Replacing them means cutting or infilling custom openings in solid block, which adds real labor.
- Binding or seized sashes: Corroded tracks and hinges make windows stick. We hear it all the time: “I have to put my shoulder into it.” That’s a safety problem and a signal the frame and hardware are failing. If the window can’t open in an emergency, it’s a hazard, not an inconvenience.
Pricing for Window Replacement in Redington Shores, FL
A straight insert replacement in Redington Shores typically runs $450 to $900 per window, depending on size and whether you go with impact glazing. Full frame replacement on a mid-century CBS cottage starts around $1,100 and can exceed $2,500 per opening when we’re cutting solid block and reframing for impact-rated units. Coastal-spec hardware, stainless fasteners, marine-grade frames, flashing tape, and permit-ready impact glazing generally adds 20 to 35 percent over an inland-spec job. The cheap spec looks fine on paper for a few years. Then the salt gets it. Call (954) 280-4413 for a free written estimate with both spec levels quoted side by side. No surprises on the bill, no change orders after the work starts.
We Also Serve Cities Near Redington Shores
Our crews work throughout the surrounding area, including Acacia Villas, Alafaya, Altamonte Springs, and Altoona. If you’re nearby and wondering whether we cover your street, the answer is usually yes. You can learn more about what we do across the region on our Window Replacement in Redington Shores page or just call the office and ask.
Serving Redington Shores, FL - Our Local Coverage Area
We’re based in the Redington Shores area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Replacement in Redington Shores
Because the town sits on a narrow barrier island with salt air blowing in from the Gulf of Mexico on the west and Boca Ciega Bay on the east. Every window and door gets a double dose of salt, which attacks aluminum and steel hardware far faster than the single-direction exposure inland Pinellas communities get. Corrosion you might not see for twenty years in Largo shows up in Redington Shores within a decade. That’s why we specify marine-grade materials here as the standard, not an upgrade.
Yes. The entire municipality falls within Florida’s Wind-Borne Debris Region and Pinellas County’s coastal high-hazard area. Any window or exterior door replacement requires impact-rated glazing or a code-compliant shutter system. That’s a permit requirement, not a preference. We pull permits, pass inspections, and register both warranty layers in writing before the job closes. Call (954) 280-4413 for an exact quote on your opening sizes.
We remove them entirely. Jalousie windows in Redington Shores’s CBS cottages were set directly into solid block with little or no flashing or sealing. On a recent job off 174th Avenue, we cut the block openings square, built proper rough frames, set fusion-welded vinyl double-hungs with impact glass and argon fill, installed stainless jamb hardware, and sealed every rough opening with flashing tape before the new sashes went in. The old windows are hauled away and the wall is sealed correctly for the first time since the house was built.
Coastal-spec materials, marine-grade aluminum or fusion-welded vinyl with stainless hardware and impact glazing, generally run 20 to 35 percent higher than the inland-spec version of the same job. On a full frame replacement that might mean $1,800 for the inland-spec window versus $2,300 to $2,500 for the coastal-spec. The cheaper spec saves money today and fails inside a decade on the barrier island. We quote both lines side by side on paper so you can make the call with the full picture. Estimates are free. Call (954) 280-4413.
Fog between the panes means the insulating glass seal has failed, the argon or krypton fill is gone, and the window is doing almost nothing to stop heat transfer or UV. In Redington Shores’s constant salt humidity, that seal failure happens faster, and the resulting condensation creates moisture inside the cavity where it feeds mold growth in the wall. A fogged window on the barrier island is not a cosmetic issue, it’s a moisture problem behind the drywall. If your windows are fogging, call (954) 280-4413 for a free replacement estimate.
Contact TruePane Windows & Doors in Redington Shores
If your windows are fogging, binding, or corroding, call (954) 280-4413. A live person answers. We’ll schedule a time to measure, quote your options side by side on paper, and give you a written price before any work begins. Dale Kessler’s rule is still the one we work by: if the pane is not true, the job is not done.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Redington Shores and the surrounding barrier island communities.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.