Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Andersen Windows & Doors in Hollywood, FL | TruePane Windows & Doors
We provide independent Andersen window and door service across Hollywood, from the beachfront condos on South Ocean Drive to the CBS homes lining the Intracoastal, and we also handle Andersen in North Miami Beach. Nobody else in Hollywood pairs deep Andersen model knowledge with the dual-permit discipline this city’s building department actually enforces. If your Andersen windows or doors need repair or replacement, call us at (954) 280-4413 for a free estimate.
Why Hollywood Residents Choose Us for Andersen Service
TruePane Windows & Doors has been working glass and framing in South Florida since 2008, and our Hollywood crew dismantles and rebuilds Andersen frames every week inside HVHZ buildings. We know which Andersen series can hold a Miami-Dade NOA on a salt-exposed east-side sill and which ones need rough-opening surgery before the new sash goes in. We’re independent, so we call repairs like the field shows them, not like a factory bulletin tells us to. That independence matters here, where a mismatched part or a missed Broward County approval can stall a permit for weeks. Dale Kessler, our founder, keeps the same rule on the whiteboard he learned as a second-generation glazier: if the pane is not true, the job is not done. We’re not the cheapest bid in Hollywood. We’re the last call a homeowner needs to make on an Andersen unit.
Common Andersen Windows & Doors Problems We Solve in Hollywood
- Salt-air corrosion on Perma-Shield aluminum cladding. Along Hollywood Beach and the Intracoastal, the salt air pits and binds Perma-Shield frames to their sashes years earlier than the same units fail inland. We’ve pulled tracks with rollers worn straight through them. We rebuild the sill pan, not just the sash, when the corrosion has eaten into the frame itself.
- Blown insulating glass seals in 400 Series units facing direct Atlantic sun. Hollywood’s east-facing exposures cook the glass all afternoon. When an Andersen 400 Series double-hung loses its argon and fogs permanently, that unit will not pass a Broward wind-mitigation inspection. We replace the insulated glass unit with an energy-rated match and document it for the report.
- Worn balance tubes and tilt-latch hardware on double-hung units in pre-1980 Hollywood homes. Decades of salt-laden humidity get into the balance mechanisms on 1950s and 1960s CBS houses. The sash won’t stay up, or it slams when you tilt it for cleaning. We stock the common balance tube sizes for Hollywood service calls and can rebuild them the same afternoon.
- Rotted wood sills on A-Series casements in barrier-island condos. Storm-driven rain and constant A/C condensation drip through failed flashing on older beachfront buildings. The sill rots behind the cladding where you can’t see it. We cut out the rot, rebuild the sill, and set the new unit in a properly sloped pan so water drains away from the frame.
- Permit-stalled replacements from missing Broward County product approvals. This is a Hollywood-specific failure mode. Contractors from Palm Beach County pull the wrong permits here because HVHZ rules don’t apply up there. We hand the Hollywood building department the Miami-Dade NOA and the Broward County approval together, every time, so the job doesn’t die at the counter.
Andersen Service in Hollywood: What Local Conditions Mean for Your Equipment
Hollywood requires two separate documents before any replacement window or door permit gets issued: a current Miami-Dade Notice of Acceptance and a separate Broward County product approval. That dual-check is unique in Broward, and it catches contractors who are used to working under Palm Beach County rules where HVHZ standards don’t apply. For an Andersen owner in Hollywood, the practical consequence is simple: an otherwise solid Andersen impact unit that carries a valid Miami-Dade NOA can still stall for weeks if the Broward County approval wasn’t pulled from the right database. We keep both documents printed in the job file on every Hollywood permit we pull, so an Andersen replacement never sits at the counter over a missing county approval. On a 1960s condo on South Ocean Drive near Hollywood Beach, our tech found an original Andersen Perma-Shield gliding door with the aluminum track so corroded by salt air that the rollers had worn through it. We pulled the old frame, rebuilt the sill pan and rough opening, then set a new impact-rated Andersen gliding door with a current NOA. Broward approved the same week because we handed them the NOA and the county product approval together. If it is not right on paper, it will not be right on the wall.
Andersen Models & Products We Service in Hollywood
We service the Andersen lines Hollywood homeowners actually have, not just the ones in the current catalog. That includes the 400 Series Woodwright double-hung, Perma-Shield gliding patio doors, A-Series casement windows, and E-Series awning windows. For Andersen hardware and weatherstripping, we use original-equipment parts when the unit is still in production because the geometry is unforgiving. For discontinued 400 Series balances and glides, we match with proven aftermarket equivalents that outlast the salt air. On this page, Andersen sales & service means we’re an independent provider, not manufacturer-affiliated or authorized. Our Hollywood service area coverage includes the beachside condos, the Intracoastal corridor, and the CBS neighborhoods west toward 95. If the sill is rotted or the frame is racked from a tired rough opening, we tell the owner straight: replacing the whole unit with a current NOA-bearing Andersen product beats patching a frame that will fail the next condo recertification.
Andersen Service Pricing in Hollywood
Andersen repair and replacement pricing in Hollywood depends on the failure we find and the condition of the rough opening behind it. A simple balance tube replacement on a double-hung runs lower than a full Perma-Shield gliding door replacement with sill pan rebuild, and rightly so. A free estimate from us includes a written line-item quote, both warranty layers registered in writing before the truck leaves your driveway, and the Done Right Promise behind the workmanship. No surprise line items on the bill. Call (954) 280-4413 for an exact quote on your Andersen unit. We’ll inspect it, tell you what it needs, and write it down so you can see every line before you decide.
Serving Hollywood, FL - Our Local Coverage Area
We’re based in the Hollywood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Andersen Windows & Doors in Hollywood
Yes, every replacement window and door in Hollywood requires both documents before a permit is issued. We pull Hollywood permits with the current NOA and the county product approval printed in the job file, so your Andersen gliding door never stalls at the counter while the building department waits on paperwork. Call (954) 280-4413 and we’ll verify both documents for your unit before we quote the job.
It depends on the frame and the sashes. If the frames are square and the rough openings are tight, we can often rebuild the balances, replace the tilt latches, and set new insulated glass units, then document the work for Broward County records. If the sills are rotted or the frames have racked from decades of salt-laden humidity, we’ll tell you straight: full replacement with a current NOA-bearing Andersen product is the better money. Either way, the estimate is free at (954) 280-4413.
Andersen’s E-Series and A-Series lines with impact-rated glass and appropriate cladding hold up better in direct salt air than older Perma-Shield aluminum cladding, which pits and binds years earlier along the A1A corridor. For true beachfront exposure, we recommend a frame material and finish rated specifically for coastal salt spray, and we’ll quote it side by side on paper so you see the comparison. Call (954) 280-4413 for an exact Hollywood-specific recommendation.
Buildings in Hollywood reaching the 40-year structural recertification threshold under Florida’s post-Surfside law often trigger whole-floor or whole-building replacement scopes, especially along the barrier island and the Intracoastal. If your condo association is moving toward a recertification, an Andersen sliding door replacement must carry a current Miami-Dade NOA and Broward County product approval, and the installation must be documented to pass the wind-mitigation review. We coordinate whole-floor scopes, pull the permits with both documents, and register both warranty layers before we leave the site, and we offer the same thorough process for Andersen repair in Miami Gardens. Call (954) 280-4413 to discuss your building’s timeline.
Yes, jalousie windows are non-impact and typically pull down the overall wind-mitigation rating for the whole opening, even if the adjacent Andersen sliding door is impact-rated. If you’re replacing a jalousie window alongside an Andersen door, we’ll quote the whole opening so the wind mitigation report comes back clean. Call (954) 280-4413 and we’ll walk the openings with you.
Service Areas Near Hollywood
Our crew covers Hollywood and the surrounding Broward and South Florida communities. For Andersen service outside the immediate Hollywood corridor, look at Andersen service in Holmes Beach for Gulf Coast coverage and Andersen service in Homestead for points south. We also serve customers throughout the wider tri-county area, including coastal Broward and the communities between the Atlantic and the Turnpike.
Book Your Andersen Service in Hollywood Today
Whether it’s a corroded Perma-Shield track on the beach or a fogged 400 Series sash inland, we’ll send a uniformed, background-checked tech who measures twice and writes everything down before work starts. Call (954) 280-4413 to schedule your free estimate on your Andersen windows or doors in Hollywood, or ask about Andersen service in Plantation.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Hollywood since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After