Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterAndersen Windows & Doors in South Palm Beach, FL | TruePane Windows & Doors
We provide independent Andersen window and door service across South Palm Beach, from single-unit repairs to full building-wide replacement contracts for condo associations. What makes our Andersen work different here is simple: we have been inside a high percentage of the town’s pre-1990 Andersen-clad towers, so we already know which frame series, finish, and failure point each building has before we walk through the door. Call (954) 280-4413 for a free estimate.
TruePane Windows & Doors has served South Palm Beach for years as an independent Andersen service provider. We are not manufacturer-affiliated or factory-authorized, and we will tell you that straight. What we offer instead is working knowledge of how Andersen casements, gliding doors, and Frenchwood patio units fail under this barrier island’s dual salt-air exposure, plus the parts discipline to fix them correctly. Andersen sales & service is a core part of what we do, and in South Palm Beach that means understanding the difference between a worn roller carriage and a frame that has corroded past the point of repair.
Why South Palm Beach Residents Choose Us for Andersen Service
Most glass companies can order an Andersen sash and swap it. Fewer can tell you why the original 1981 bronze-anodized casement on the 12th floor of one South Palm Beach tower seized while the identical unit three floors down still operates, and that comes down to exposure angle, salt load, and how the building was cleaned over four decades. Dale Kessler, our owner, learned glazing in South Florida’s coastal corridor and has spent the better part of two decades working glass and framing from Coral Ridge to Dania Beach. He measures twice before a crew ever touches a truck, and he holds every tech to the same standard.
We work on Andersen equipment with genuine factory hardware where it matters: balances, hinges, rollers, and sash locks. For discontinued finishes or obsolete trim from the 1970s and 1980s towers, we source from local Florida glazing suppliers who keep stock specifically for these aging buildings. Background-checked, uniformed technicians show up on time, and a live person answers our phone 24 hours a day, seven days a week. You will not get a voicemail tree when you call about a failed Andersen operator arm in July.
Common Andersen Windows & Doors Problems We Solve in South Palm Beach
- White oxidation bloom on 400 Series casement frames. The eastern exposures along South Ocean Boulevard take wind-driven salt spray off the Atlantic year-round. We see the telltale white bloom at lower sashes when the aluminum finish has begun to fail, and if left alone the operator arms seize and the sash will not close. This is a safety problem, not a cosmetic one.
- Perma-Shield gliding doors binding at the roller carriages. Fine beach sand and wind-driven salt work into the bottom tracks of ocean-view units. The rollers grind down, the door gets heavy, and eventually the carriage binds. We replace the rollers with genuine Andersen hardware and clean the track channels properly, not just spray lubricant over the corrosion.
- Frenchwood hinged patio doors warping on lanai enclosures. South Palm Beach units with air-conditioned interiors and salt-humid balconies create a constant moisture differential. The wood core of a Frenchwood door absorbs and releases moisture unevenly, which throws off the closing alignment and flattens the gaskets. We re-align, replace gaskets, and when the warp is structural, we tell the owner plainly that replacement is the sounder path.
- Hidden rot behind aluminum cladding on Intracoastal-facing units. Original Andersen wood frames behind aluminum cladding can develop rot at the sill corners from years of salt and humidity intrusion on the west side. We rarely see it until a full-frame replacement is underway, which is exactly what SB 4-D milestone inspections are now forcing many boards to confront.
- Failed seals on original single-pane glazing. The original Andersen units in South Palm Beach’s late-1960s through 1980s towers were single-pane and non-impact. Fogged seals are the most visible symptom, but the real issue is that these units do not meet current Florida impact-glazing requirements. We are direct with HOA boards about when seal replacement makes sense and when full replacement is the only compliant option.
Andersen Service in South Palm Beach: What Local Conditions Mean for Your Equipment
South Palm Beach sits on one of the most exposed barrier island strips in Palm Beach County, with ocean fetch on both the Atlantic and Intracoastal sides. That means salt-air corrosion hits your Andersen equipment from two directions at once, and it accelerates failures at a rate well above inland communities. Original aluminum frames oxidize faster, hardware corrodes more aggressively, and seals fail sooner. Every replacement unit must carry Florida Product Approval for large-missile impact resistance because the town is in a direct hurricane exposure zone. If the window is not impact-rated and properly anchored, it will not pass inspection, and it will not protect the people inside.
The part most homeowners and even some board members miss is the balcony and lanai enclosures. Many of the older towers in South Palm Beach still have original jalousie or single-pane aluminum sliders on lanais, and those are specifically flagged as life-safety concerns during mandatory milestone inspections. An HOA board cannot defer that line item anymore the way they could a decade ago. When we inspect a lanai with original Andersen single-pane panels, we document the opening dimensions, the anchor condition, and the frame series, then give the board a written recommendation that holds up when the structural engineer reviews it.
Dale Kessler puts it plainly: “If it is not right on paper, it will not be right on the wall.” That applies to a single Frenchwood door as much as it does to a twelve-story replacement contract.
Andersen Models & Products We Service in South Palm Beach
We service the Andersen lines most common in South Palm Beach’s 1970s and 1980s towers. That includes the Andersen 400 Series Casement Windows with the original bronze-anodized frames, the 200 Series Narroline Gliding Windows in aluminum-clad wood, Frenchwood Hinged Patio Doors from the 1980s and 1990s, and 400 Series Perma-Shield Gliding Patio Doors. Our parts approach is consistent: genuine Andersen factory hardware for anything structural or safety-related, and for discontinued finishes or obsolete trim, we source from local Florida suppliers who stock for these specific towers. For pre-1990 Andersen units with corroded frames, we are candid with HOA boards: replacement with modern Andersen 400 Series impact glazing is usually the sounder investment than continued parts patching.
Andersen Service Pricing in South Palm Beach
Andersen window and door service in South Palm Beach spans a wide range because the scope varies so much. A roller carriage replacement on a gliding door starts around $250 to $450. A full casement operator replacement runs $350 to $650, depending on the frame condition. Seal and gasket work on a Frenchwood door typically lands between $400 and $800, and full-frame impact replacement on a single Andersen 400 Series unit starts around $1,800 to $2,800, with building-wide contracts priced per opening and per floor because swing-stage access and HOA scheduling affect labor.
What drives the cost in South Palm Beach specifically is access. Most of the town’s work happens above the third floor, and many HOAs prohibit ladder work over pool decks or require swing-stage use, which adds labor hours. Salt corrosion also means we sometimes find anchor damage once the old frame comes out, and that repairs correctly before the new unit goes in. Our free estimate covers a site visit, opening measurements, a written line-item quote, and both warranty layers registered in writing before the truck leaves. Call (954) 280-4413 for an exact quote.
Serving South Palm Beach, FL - Our Local Coverage Area
We’re based in the South Palm Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Andersen Windows & Doors in South Palm Beach
Yes. South Palm Beach requires town-level approval in addition to Palm Beach County building permits for impact window and door replacement, and the HOA typically has its own architectural review step as well. We handle the permit paperwork for the association and coordinate the inspections so the board is not chasing signatures. Call (954) 280-4413 and we will walk you through the exact requirements for your building.
It depends on the condition of the frame. If the operator arm is seized but the frame extrusion is sound and the unit is impact-rated, repair is usually viable. But original 1980s Andersen casements in South Palm Beach are typically non-impact single-pane units, and under SB 4-D those get cited as life-safety deficiencies in the first inspection phase. In most towers, replacement with modern Andersen 400 Series impact casements is the compliant path. Call (954) 280-4413 and we will give you an honest assessment in writing.
Yes. The constant moisture differential between air-conditioned interiors and salt-humid balconies causes the wood core to warp unevenly, throwing off the closing alignment and flattening the gaskets. Inland homes do not have that same salt-laden humidity load, so the warping pattern is distinctly coastal. Call (954) 280-4413 for a gasket and alignment inspection before the door gets worse.
The HOA must approve it. In South Palm Beach, the building envelope, including windows and doors, is almost always defined as a common element in the governing documents. An owner cannot unilaterally replace Andersen windows with any other product or style without board approval, and the board must approve the product line for consistency across elevations. We work with boards and management companies directly to keep the approval process moving. Call (954) 280-4413 if your board needs product submittals or spec sheets.
The Andersen 400 Series casement with bronze-anodized frames is the most common original product in South Palm Beach towers, along with Frenchwood hinged patio doors on lanais. It matters because replacement units must match the original rough opening dimensions, the existing anchor pattern, and the building’s wind-load requirements as defined in the current structural calculations. Knowing the original series means we can spec the correct modern equivalent without re-engineering every opening. Call (954) 280-4413 for a free estimate on your unit or building.
Service Areas Near South Palm Beach
We provide South Palm Beach service area coverage across the barrier island and the mainland communities nearby, including Lantana, Hypoluxo, Manalapan, Lake Worth Beach, and Boynton Beach. We also offer Andersen service in South Pasadena for clients on the Gulf side, and Andersen service in Southwest Ranches for larger estate properties farther inland. The common thread is the same: Andersen equipment serviced correctly, with genuine factory hardware where it matters and honest recommendations where replacement is the better investment.
Book Your Andersen Service in South Palm Beach Today
If your Andersen windows or doors need service in South Palm Beach, call (954) 280-4413 now. We will send a background-checked technician, measure every opening twice, and give you a written line-item quote before any work begins. A live person answers the phone, and we schedule around your HOA’s access rules. Call today to schedule your free estimate.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving South Palm Beach and Palm Beach County with Andersen window and door service since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.