Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterPGT Windows & Doors in Sunrise, FL | TruePane Windows & Doors
We service PGT windows and doors across Sunrise as an independent provider, not a factory-authorized dealer, and we’re upfront about that. The thing that separates PGT work in Sunrise from anywhere else is the paper trail: every window and door replacement here sits in Florida’s High Velocity Hurricane Zone, so each PGT unit we set carries a Miami-Dade NOA and gets a Broward County permit inspection before we call the job done. Call (954) 280-4413 for a free estimate, and we’ll walk you through what your specific house needs.
Why Sunrise Residents Choose Us for PGT Service
We’ve spent years working glass and framing in South Florida’s coastal corridor. Dale Kessler, our founder, grew up in the Sailboat Bend neighborhood of Fort Lauderdale, and he’s put in impact-rated units from Coral Ridge to Dania Beach. That experience means we know PGT’s WinGuard and SpectraGuard lines the way a mechanic knows a particular engine family. Our techs cut their teeth on these exact products in HVHZ jurisdictions across Broward, and we stock the specific NOA-certified frame profiles, impact glass packs, and corner keys Sunrise homes need, without ever claiming factory authorization. When you call TruePane about a PGT window or door in Sunrise, you get a live person on the phone, 24/7, and a uniformed technician who measures every opening twice before a truck ever leaves our lot.
Common PGT Windows & Doors Problems We Solve in Sunrise
- Fogged or edge-seal-failed SpectraGuard double panes. Sunrise’s intense afternoon convective storms drive thermal pumping, heating and cooling those insulated glass units until the edge seals let go. The result is a fogged pane that will not clear, and it’s a repair we handle with genuine PGT IGUs matched to your existing frame.
- Stripped lock keepers and sagging hinged hardware on WinGuard casements and awnings. Pre-2000 installs in Sunrise used original aluminum clips that corrode in our humidity. We replace them with PGT hinge kits and lock sets that bring the sash back to a positive seal.
- Worn stainless steel rollers on WinGuard sliding glass doors. The fine concrete dust and wind-blown grit from retention pond edges across Sunrise grinds rollers down prematurely. We stock PGT roller assemblies and swap them before a door starts dragging against the track and damaging the frame.
- Warped or binding WinGuard impact panels on jalousie-to-impact conversions. When the original rough opening in a 1960s Sunrise concrete-block home is out of square, the panel geometry fights you. We re-shim and set the frame true before hanging panels, because forcing them into a crooked opening is how warranties get voided.
- Non-impact PGT aluminum units from the 1990s. A lot of Sunrise’s early PGT installs were rated for wind but not impact. If a Miami-Dade NOA does not apply to your existing units, they will not earn the opening-protection insurance discount, and we’ll be straight with you about replacement versus repair.
PGT Service in Sunrise: What Local Conditions Mean for Your Equipment
Here is the fact that shapes every PGT decision in Sunrise: unlike any Palm Beach County town across the county line, every window and door replacement in Sunrise must carry a Miami-Dade Notice of Acceptance. That requirement forces us to pull a Broward County permit with a product approval number before we can even set a PGT impact unit. It is the single biggest hurdle for homeowners used to no-permit work elsewhere, and it is also the reason Sunrise homeowners have one of the strongest financial cases for impact-rated replacement anywhere in the state. Broward’s insurance rates are brutal, and the documented opening-protection premium discounts on impact-rated PGT products turn a necessary upgrade into a long-term ROI decision. In Sunrise Golf Colony, for example, we pulled the original jalousie windows from a 1968 CBS ranch and set PGT WinGuard Aluminum single-hungs and a matching WinGuard sliding glass door into the block openings, then ran the required Broward County wind-mitigation inspection. The homeowner’s insurance agent applied the opening-protection discount the same week. That sequence, permit to inspection to insurance credit, is routine for us and frustrating for homeowners who hired out-of-town installers that did not know the code.
PGT Models & Products We Service in Sunrise
We work on PGT WinGuard Vinyl, WinGuard Aluminum, SpectraGuard, and ClassicVue, and we know the difference between a repair and a replacement. A single failed IGU on a five-year-old WinGuard unit is a repair. A whole house of 1990s PGT aluminum without impact rating is a full-frame replacement, and we will not pretend otherwise. We prefer genuine PGT parts because PGT’s warranty and NOA listings tie to those part numbers. For out-of-production hardware, we source machined stainless or marine-grade aftermarket equivalents that match the original footprint. If you need PGT sales & service work done right, we stock what Sunrise homes commonly need so we are not waiting on a distributor for two weeks.
PGT Service Pricing in Sunrise
PGT service pricing in Sunrise runs roughly $180 to $340 for most hardware and roller replacements, $350 to $900 for a single impact IGU depending on size and glass package, and $1,200 to $3,800 per opening for full PGT impact window replacement with the required permit and inspection. What drives cost here is the NOA documentation, the Broward permit, and the condition of the existing rough opening. Our free estimate includes a line-by-line written quote, side-by-side manufacturer options on paper, and both warranty layers registered before the truck leaves the driveway. Call (954) 280-4413 for an exact number on your house.
Serving Sunrise, FL - Our Local Coverage Area
We’re based in the Sunrise area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - PGT Windows & Doors in Sunrise
Sunrise sits entirely within Florida’s High Velocity Hurricane Zone, which extends into Broward and requires Miami-Dade product approval for any impact opening protection. A PGT window without a valid NOA cannot pass a Broward County permit inspection in Sunrise. Call (954) 280-4413 and we’ll check your existing units against the NOA database before you spend a dollar.
If the frame is true and the sash is intact, we replace only the failed IGU with a genuine PGT glass pack matched to your NOA listing. If the frame is corroded or the corner keys are failing, a new sash or full unit is the honest call. We’ll show you the frame condition on site and let you decide with a written quote in hand.
Only if your existing PGT units carry a Miami-Dade NOA and you have the documentation to prove it. Most 1990s PGT aluminum in Sunrise was not impact-rated, which means no opening-protection credit. We can pull the records, verify what you have, and quote replacement options if the discount math works in your favor.
Check the corner of the glass for an etched mark or a label that lists the Miami-Dade NOA number and impact rating. Tempered glass breaks into small pieces but does not stop a wind-borne 2×4. We verify every unit against the NOA database as part of our free estimate, and we’ll show you the paperwork.
Sunrise’s western flatland location and retention pond network put fine concrete dust and wind-blown grit in the air, and that grit works into the roller assemblies on sliding doors. Weston and Coral Springs have newer housing stock and different drainage patterns, so they do not see the same accumulation. We stock PGT roller kits and replace them before the door scores the track. Call (954) 280-4413 for a quote on a roller swap.
Service Areas Near Sunrise
We run PGT service throughout Sunrise and into the surrounding communities, including Acacia Villas and the communities just across the county line. If you are in the Sunrise service area, we’re local to you. We also take calls from homeowners near PGT service in Surfside and PGT service in Sweetwater who need someone familiar with Broward’s HVHZ permitting rules.
Book Your PGT Service in Sunrise Today
If you have a PGT window or door that needs attention in Sunrise, call (954) 280-4413. We’ll schedule your free estimate, measure the openings, and give you a written quote with the NOA and permit details spelled out. If it is not right on paper, it will not be right on the wall.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Sunrise since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.