CGI Windows & Doors in Atlantis, FL

CGI Windows & Doors in Atlantis, FL | TruePane Windows & Doors

TruePane Windows & Doors provides independent Atlantis Window Installation and door service throughout Atlantis, Florida. We’re not a franchise operation, and we’re not tied to any manufacturer’s sales script. What makes our CGI work different here is simple: we know how these products fail in Atlantis specifically, where salt air meets 1960s aluminum frames and the city’s architectural review board keeps its own checklist. Call (954) 280-4413 when a CGI window or door stops working the way it should.

Call (954) 280-4413

Why Atlantis Residents Choose Us for CGI Service

Dale Kessler grew up in Sailboat Bend, not far from here, and learned glazing at McFatter Technical College in Davie before spending two decades working glass and framing along South Florida’s coastal corridor. That background matters when you’re dealing with CGI products in Atlantis, because most of what goes wrong here is predictable. The salt air corrodes aluminum screw bosses. The sun bakes south-facing IGUs until seals fail. The sandy fill shifts and screen tracks collapse. We’ve seen every one of these failures on CGI windows and doors in Atlantis, and we know which ones call for a repair and which ones call for a full-frame replacement.

We carry OEM CGI glazing, hardware, and weatherstripping whenever it’s available, because CGI frame extrusion tolerances are tight and aftermarket parts don’t always match. When a part is discontinued or backordered, we use approved aftermarket components that we test for wind-load continuity before they go in. You get a straight answer on what’s right for your home, not what’s easiest to sell. The same standard applies to our CGI sales & service work across Palm Beach County – if the pane is not true, the job is not done.

Common CGI Windows & Doors Problems We Solve in Atlantis

• Salt-air pitting and galvanic corrosion on CGI Estate Series patio door headers. The aluminum-to-stainless screw bosses are the weak point. Within a decade of ocean-adjacent exposure, they corrode to white powder, the rollers misalign, and the panel starts binding. We pull the header, machine out the stripped screws, re-tap to oversized stainless fasteners, and true the roller carriage. No full tear-out required.
• Clouded or seal-failed IGUs on large CGI picture and fixed windows. Atlantis homes are full of wraparound picture windows and oversized fixed glass from the original buildout. South-facing units take direct sun for eight hours a day, and the original low-E coatings eventually break down. We reglaze the sash in place – the frame stays put, and you get clear glass again without pulling the wall apart.
• Frozen locking handles and multipoint strikes on CGI French and swing doors. Humidity and salt build up inside the concealed espagnolette channel and seize the mechanism. We disassemble, clean, lubricate, and replace the strikes when they’re beyond saving. If the door still doesn’t throw the lock cleanly, we’ll tell you that too.
• Hardened or collapsed screen track glides on CGI sliding windows and doors. Atlantis sits on older sandy fill, and decades of settling shifts the track alignment. Panels jump the rail or refuse to glide. We replace the glides, reset the track, and adjust the rollers so the panel rides true again.
• Stripped operator arms on CGI crank-out casement windows. The 1980s-era casements still found around Atlantis were built with pot-metal operator arms that fatigue over time. When the arm strips, the window won’t seal. We stock replacement operators for most CGI casement lines and can usually swap one out in a single visit.

CGI Service in Atlantis: What Local Conditions Mean for Your Equipment

Here’s the thing about Atlantis that nobody tells you until it’s too late: the city government functions more like a private community association than a municipality. That means a window or door replacement can pass Palm Beach County permitting for wind-borne debris protection and still get flagged by Atlantis City Hall for aesthetic non-conformance. Frame color, grid pattern, exterior profile – if the city’s architectural review checklist says the replacement departs from the original 1960s-to-1980s ranch glazing, final sign-off gets held. This doesn’t happen one block outside city limits in unincorporated county pockets, and it doesn’t happen in Lake Worth Beach. It’s specific to Atlantis. So when we service CGI windows and doors here, we’re not just thinking about wind-load calcs. We’re thinking about whether that replacement mullion pattern will pass the city’s visual review. If you’re planning a full-frame CGI retrofit, we spec the frame profile and color against the original before we order anything. It’s the only way to avoid a callback that costs you weeks.

CGI Models & Products We Service in Atlantis

We work on the full CGI residential line: Estate Collection picture and casement windows, Estate Series aluminum sliding glass doors, Custom Classic single and double hung windows, and Architectural Series fixed and awning windows. Our default is OEM CGI glazing, hardware, and weatherstripping, because the extrusion tolerances and locking geometry are matched to the frame. For discontinued lines or urgent repairs, we stock approved aftermarket rollers, sealants, and multipoint strikes that have been checked for wind-load continuity. We only recommend full-frame replacement when the aluminum itself is corroded through or the glass unit no longer meets current high-velocity hurricane zone ratings. Otherwise, we repair what’s repairable and leave the frame alone.

CGI Service Pricing in Atlantis

FAQs - CGI Windows & Doors in Atlantis

Service Areas Near Atlantis

Our crews work throughout Palm Beach County and beyond. Along with Atlantis, we regularly serve Atlantis service area neighbors in Acacia Villas and communities across the coastal corridor. If you’re near CGI service in Aventura to the south or CGI service in Bal Harbour, the same independent CGI approach applies – repair what’s repairable, replace only when the frame demands it.

Book Your CGI Service in Atlantis Today

One call gets you a straight answer and a written estimate. We’ll be there when we say, we’ll quote the work line by line, and we’ll stand behind it. Call (954) 280-4413 to schedule your free CGI service estimate in Atlantis. If your window or door is down, we can usually get a tech out the same day.

Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Atlantis and Palm Beach County since 2008.