Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCGI Windows & Doors in Dade City, FL | TruePane Windows & Doors
We provide independent CGI window and door service across Dade City, from full-frame replacements on pre-war bungalows to hardware repair and glass replacement on newer Estate and Sentinel units. What separates our CGI work here from a generic install is simple: Dade City’s older wood-frame stock presents rough-opening sizes and rot conditions that a coastal crew rarely sees, and we come prepared with a framing crew, not just a sash kit. If you need a CGI unit serviced or replaced, call (954) 280-4413 for a free estimate.
Why Dade City Residents Choose Us for CGI Service
Our crew has spent years pulling apart CGI windows and doors from Dade City’s oldest wood-frame stock, learning which of their series actually handle an inland Florida retrofit where the original rough opening is rough by design. Because we also service PGT, Andersen, and Pella, we can tell you honestly when a CGI fix is the right call and when it isn’t. Dale Kessler founded TruePane on the rule that out-of-true installs and voided warranties were problems worth fixing permanently, and that rule governs how we approach every CGI unit we touch in Dade City. We are an independent service provider, not a manufacturer-affiliated shop, so our recommendations come from what the unit and the opening actually need, not from a quota. For more on our broader CGI work, see CGI sales & service.
Common CGI Windows & Doors Problems We Solve in Dade City
- Aluminum frame pitting along the fixed sill track on casement units. Older bungalows in Dade City frequently lack modern drip edges, so stormwater from afternoon downpours pools along the sill track and sits there. Over time that trapped water pits the aluminum and binds the sash. We strip the corrosion, repair or replace the track, and correct the flashing so the water has somewhere to go.
- Vinyl glazing bead shrinkage on double-hungs causing glass rattle. The inland humidity cycles in Dade City accelerate the expansion and contraction of vinyl glazing beads, and by the time a microburst rolls through, the glass rattles in the sash. We re-bead the unit with correctly spec’d material and re-seat the glass so it’s tight again.
- Weep-hole blockage from disintegrated wood-framing debris. On full-frame replacements in pre-1960 homes, bits of rotted original framing find their way into the weep system and block drainage. That traps moisture inside the frame and starts the pitting cycle all over again. We clear the weep channels and address the source of the debris.
- Non-impact insulated glass seal failure in retrofit situations. When CGI units get installed into original single-pane sash openings without proper remediation of frame moisture, the seals fail early. The fogged glass you’re looking at is usually a symptom of moisture trapped behind the frame, not just a bad IGU. We fix both.
- Rough openings that don’t match any stock CGI size. This is the signature Dade City problem, and it’s the one that separates a real fix from a shim-and-caulk cover-up. We’ll get to that in detail below.
CGI Service in Dade City: What Local Conditions Mean for Your Equipment
In the blocks around 7th Street and Meridian Avenue, original door and window openings in pre-WWII homes are commonly 1 to 3 inches narrower than any modern stock unit. That is not a measurement anomaly; it is what early Florida framing actually looks like. A CGI Estate or Sentinel unit is precision-milled to a modern opening, so when it meets a 1918 rough opening, something has to give. The installers who don’t carry a framing crew either custom-order and wait, or shim the opening improperly and leave the unit out of true. Dale Kessler’s rule applies here: if it is not right on paper, it will not be right on the wall. We correct these openings properly, which means reframing when necessary, rebuilding rotted jack studs with pressure-treated lumber, and setting the unit square. That is the difference between a CGI window that operates cleanly for twenty years and one that binds by August.
CGI Models & Products We Service in Dade City
We service the full residential CGI lineup, including the Estate Series, Sentinel Series, and Classic Series. We specify OEM CGI hardware and weatherstripping when the unit is still under warranty or close to its design life, but we won’t replace a sash for a part we can source from a quality aftermarket vendor if it keeps the opening sealed and code-compliant. For Dade City’s older stock, we tell homeowners straight: if the original wood sill has rot, a full-frame replacement is almost always cheaper long-term than an insert that leaves the failure in place. We stock common CGI rollers, locks, keepers, and weatherstripping for faster turnaround on routine repairs.
CGI Service Pricing in Dade City
CGI service pricing in Dade City typically breaks down like this:
- Service call and diagnostic: $75-$150, credited toward the repair if you proceed
- Hardware replacement (rollers, locks, keepers): $120-$300 per unit
- Weatherstripping and seal replacement: $90-$250 per opening
- Insulated glass unit replacement: $250-$600 per sash, depending on size and glass package
- Full-frame CGI replacement with rotted framing remediation: $1,800-$4,500 per opening
What drives the cost in Dade City is the condition of the original framing; a clean opening is a straightforward swap, but a rotted sill and narrow rough opening add reframing labor that coastal subdivisions never need. We quote the work in writing before we start, and the price on the paper is the price on the bill. Call (954) 280-4413 for an exact quote on your specific openings, estimates are free.
Serving Dade City, FL - Our Local Coverage Area
We’re based in the Dade City area and know this community well, and we also offer Zephyrhills CGI service nearby. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - CGI Windows & Doors in Dade City
Pasco County’s adopted Florida Building Code still requires wind-rated fenestration products meeting specific design-pressure ratings, even though Dade City sits inland on elevated terrain outside the most severe coastal wind zones. Impact glass isn’t a coastal-only requirement; it’s a code compliance issue, and we explain the specific ratings your openings need during the estimate. Call (954) 280-4413 for a compliance review.
Yes. On Dade City’s Craftsman and bungalow stock, we profile replacement trim to match the original contour and material thickness, and we restore what’s salvageable rather than defaulting to flat modern casing. The goal is a CGI unit that operates like new inside a house that still looks like itself.
Condensation is usually the culprit on inland homes. Morning humidity settles inside the frame track, and without a functioning drip edge or weep system, that moisture sits against the aluminum long enough to start pitting. We clear the weeps, verify drainage, and reseal the sill track so the moisture exits the unit instead of eating it.
We reframe the opening to the correct width and height. That’s the honest fix. Shim-ming a precision-built CGI unit into an undersized opening leaves the frame under stress, voids the air-and-water seal, and starts a cycle of binding and leaks. Our crews carry framing capability on every Dade City job for exactly this reason.
In Dade City’s historic downtown district, some replacement window and door work does trigger preservation review, especially on street-facing elevations. Every situation is different, so don’t assume either way. We’ve worked with the local review process and can tell you what documentation your specific property needs before work begins. Call (954) 280-4413 and we’ll talk it through.
Service Areas Near Dade City
We also provide CGI service in surrounding communities including Dade City service area coverage that extends through Acacia Villas, Alafaya, Altamonte Springs, and nearby Pasco County neighborhoods. If you’re in one of those areas with a CGI unit that needs attention, we’ll schedule the same crew. For coastal work, see CGI service in Dania Beach. For the Ridge and Polk County side, see CGI service in Davenport.
Book Your CGI Service in Dade City Today
If you need Groveland CGI service or help in Dade City, call (954) 280-4413. We’ll put a real person on the line, schedule a time that works, and show up with the right parts and the right crew. Free estimates, written quotes, and a Done Right Promise on every job.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Dade City since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.