Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCGI Windows & Doors in Indian Shores, FL | TruePane Windows & Doors
We provide independent Indian Shores Window Installation and door service across Indian Shores, from mid-century beach cottages to low-rise condominium buildings. The one thing that makes our CGI work different here is that we treat every opening as a two-bay marine install, because on this island, there is no sheltered side. If your CGI frames are pitting on the Gulf side while the Intracoastal side weeps are crusting shut, we know exactly what you’re up against. Call (954) 280-4413 for a straight answer and a free estimate.
Why Indian Shores Residents Choose Us for CGI Service
We work on CGI windows and doors every week in Pinellas County’s barrier islands. That field time matters, because CGI’s Estate, Sentry, and 900 Series frames don’t behave the same way in Indian Shores as they do ten miles inland. Salt spray from the Gulf meets humid air off Boca Ciega Bay, and the hardware tells the story. Our technicians know which latch styles pit first, which track designs collect sand, and when a frame is worth saving versus replacing outright.
TruePane Windows & Doors has served Florida’s coastal corridor since 2008. Dale Kessler grew up in Sailboat Bend, Fort Lauderdale, where his father spent weekends resealing jalousie windows and cursing the humidity. That’s more or less how he ended up in the trade. He learned the fundamentals at McFatter Technical College in Davie, then spent the better part of two decades working glass and framing from Coral Ridge to Dania Beach before founding TruePane in 2008. The crews he trains follow one rule: if the pane is not true, the job is not done.
Common CGI Windows & Doors Problems We Solve in Indian Shores
- Salt pitting on Estate double-hung latch-side frames. The Gulf breeze carries fine spray across this narrow island and it settles into the mill finish aluminum on the latch side. We see pitting there more than anywhere else on the frame, and it leads to sticking latches and compromised weatherstripping.
- Weep hole blockage on Sentry sliders, especially on the Intracoastal side. Sand and salt crust mix into a paste that hardens inside the weep channels. Water backs into the track, then seeps under the sill. Homeowners near Boca Ciega Bay deal with this constantly.
- Roller hardware seizing in sliding glass doors. Year-round humid marine air plus vacation rental sand works into the rollers and they bind. We’ve pulled rollers out of Indian Shores condos that looked like they’d been dipped in cement. Genuine CGI low-profile rollers are the only fix that lasts.
- Interior gasket compression set on fixed 900 Series picture units. High-temperature cycling between the Gulf sun and air-conditioned interiors compresses the gaskets over time. Hairline air leaks form at the corners, and you feel them on the hottest July afternoons.
- Jalousie windows that predate current Florida code. Many original Indian Shores cottages still have aluminum louvered windows. They cannot legally be re-glazed for replacement use in a wind-borne debris region. The fix is a full upgrade to impact-rated CGI units, pulled through a Pinellas County permit.
CGI Service in Indian Shores: What Local Conditions Mean for Your Equipment
Indian Shores is one of the only Pinellas County towns where every property lies between two bodies of salt water: the Gulf of Mexico to the west and Boca Ciega Bay to the east. That’s not a marketing line. It means a single building on Gulf Boulevard can have pitted Gulf-side hardware on its western elevation and bio-fouled Intracoastal-side weep holes on its eastern elevation, sometimes on the same floor. We regularly chart both failure modes on the same CGI install, which pushes us to specify mixed corrosion treatments within one job. A marine-grade stainless hinge on the Gulf side, a heavier schedule of weep-hole maintenance on the bay side. Generic Florida advice does not account for that, because most Florida towns are not two hundred feet wide with salt water on both sides. If it is not right on paper, it will not be right on the wall.
CGI Models & Products We Service in Indian Shores
We service the full CGI residential lineup: Estate, Sentry, 900 Series, and Targa Series windows and doors, including impact sliding glass doors and impact casements and picture units. For structural and impact-rated components like sash latches, multi-point locking bars, and low-profile rollers, we use genuine CGI factory parts, because aftermarket profiles don’t match and a mismatched latch on an impact window is a liability. For cosmetic items like exterior glazing beads or trim, we work with marine-grade aftermarket alternatives when they meet performance standards. On units with advanced frame corrosion, we stop patching and quote a full replacement. That’s the honest call. You can also see our broader CGI sales & service page for model-specific detail.
CGI Service Pricing in Indian Shores
CGI service pricing in Indian Shores runs from about $150 for a lock or roller replacement to $380 for glazing bead replacement and sealing on a fixed picture unit. A full perimeter seal rebuild on an impact casement typically lands between $600 and $900, while a complete corroded panel replacement with a CGI impact-rated unit runs from $1,850 and up depending on size and hardware. What drives the cost here is the marine environment itself: faster hardware wear, heavier corrosion, and the extra time it takes to properly prep and seal frames that have been breathing salt air for twenty years. Our free estimate includes a written line-item quote, so you see exactly what you’re paying for before any work starts. Call (954) 280-4413 to schedule one, or ask about our Indian Shores service area coverage.
Serving Indian Shores, FL - Our Local Coverage Area
We’re based in the Indian Shores area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - CGI Windows & Doors in Indian Shores
Yes, and it’s not optional. Jalousie windows are prohibited for new or replacement work in Pinellas County’s wind-borne debris region, so every opening has to go through a Pinellas County permit and inspection. We pull the permit, handle the inspections, and the work is done to current Florida Building Code. Call (954) 280-4413 to get the process started with a free estimate.
Because Indian Shores is a narrow barrier island between the Gulf and Boca Ciega Bay, wind carries sand and salt spray across the island almost constantly. On the Intracoastal side, that mix settles in weep channels and hardens into a crust. Regular cleaning of weep holes and tracks is the fix, and we can show you exactly where to clear them. Call (954) 280-4413 to have us inspect the tracks and set a maintenance schedule.
CGI impact windows are code-compliant protection on their own in Indian Shores and the rest of Pinellas County’s wind-borne debris region. No shutters are required if the impact glazing meets Florida Building Code and passes the design pressure calcs for your specific building. Some condo associations still require shutters as a secondary layer under their own rules, so check your association documents. We can walk you through it when we quote the install.
No, and we will not try. Original aluminum frames from the mid-century cottage era in Indian Shores were not engineered for current impact-rated loads. Wind-load calcs require new, properly anchored frames, and old frames from 1975 are typically not worth the liability even where they technically measure. We replace the rough opening framing as needed, and the result is a window that actually passes inspection. Call (954) 280-4413 for a free estimate on a full replacement.
If the rollers were replaced with aftermarket units, they may not match the CGI track profile exactly, and sand gets into the mismatch. We use genuine CGI low-profile rollers for exactly this reason. If the track itself is pitted or the frame has corrosion damage, even factory rollers will bind, and the real fix is a track or panel replacement. We’ll show you what’s failing before we quote anything. Call (954) 280-4413.
Service Areas Near Indian Shores
TruePane serves Indian Shores and the surrounding barrier island communities. If you’re in a neighboring town, we also cover CGI service in Indiantown and CGI service in Islamorada, Village of Islands, along with other Pinellas County coastal towns. Ask our dispatcher if we cover your street next time you call.
Book Your CGI Service in Indian Shores Today
Call (954) 280-4413 for a free estimate on CGI service, repair, or replacement in Indian Shores. We answer the phone live, we show up when we say we will, and every job is backed by our Done Right Promise.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Indian Shores since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.