Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCGI Windows & Doors in Manalapan, FL | TruePane Windows & Doors
We provide independent CGI Manalapan Window Installation and doors service throughout Manalapan, from South Ocean Boulevard estates to the Intracoastal side of the island. The honest truth: CGI makes a strong impact product, but Manalapan’s dual-salt environment punishes hardware faster than nearly anywhere else in Palm Beach County, and most of our service calls here involve corrosion on multipoint locks and frame hardware, not glass failure. That’s where our experience pays off. We’re not a CGI dealer or factory arm. We’re an independent service provider, which means we fix what’s actually failing rather than pushing a replacement when a repair makes more sense. Call (954) 280-4413 for a straight answer.
Why Manalapan Residents Choose Us for CGI Service
Dale Kessler founded TruePane in 2008 out of a simple frustration: too many window and door jobs were being rushed, measured once, and left with warranties that evaporated the moment a problem showed up. He’d spent the better part of two decades working glass and framing in South Florida’s coastal corridor, and he built this company around a rule he keeps on the whiteboard to this day: if the pane is not true, the job is not done.
For Manalapan homeowners, that matters. We’ve worked on enough CGI installations here to know exactly what the salt air does to Estate Series hardware over four or five years. We stock OEM CGI parts for the most common failures, and for gaskets, glazing beads, and non-structural trim, we use marine-grade aftermarket materials that hold up better in this specific environment than the original components. We measure every opening twice. We register both warranty layers in writing before the truck leaves your driveway. And we back every job with our Done Right Promise. If something isn’t right, we come back and make it right. No paperwork fight, no fine print.
Common CGI Windows & Doors Problems We Solve in Manalapan
Here’s what we see on CGI units in Manalapan, week after week:
- Corroded multipoint locking hardware on Estate Series impact doors. Bi-directional salt spray, off the Atlantic on one side and Lake Worth Lagoon on the other, pits the stainless or bronze finish on strike plates and lock bodies within three to five years. The handle starts sticking, then seizes. We replace with marine-grade stainless and re-torque the frame so the door locks dead straight.
- Weep-hole covers and drain channels clogged with wind-driven salt and sand. This shows up most on the leeward Intracoastal side of fixed and sliding windows. Clogged drains trap water inside the frame, which stains interior sills and eventually oxidizes the aluminum. Clearing the drains is a ten-minute fix; ignoring them is a frame replacement.
- Glazing bead and gasket shrinkage on CGI 960 Series units. South- and east-facing windows get the worst of the UV and salt. The gaskets shrink, the bead pulls away from the glass, and you start getting air and water intrusion exactly where the glass meets the frame. We replace with marine-grade gaskets that outlast the originals.
- Aluminum frame pitting at the top corners of fixed picture windows. Ocean mist collects at the top corners, evaporates, and leaves concentrated salt deposits that eat through the anodized finish. If it’s caught early, we can clean and reseal. If the pitting is deep, we’ll tell you straight: replacement is cheaper than chasing corrosion.
- Sticking sliding glass doors on the Intracoastal side only. The lagoon side of a Manalapan house gets less wind but more still, humid air that hangs against the track and rollers. Salt crystallizes in the roller bearings and the door starts to drag. We see this pattern constantly. The fix is usually roller replacement and track cleaning, not a new door.
CGI Service in Manalapan: What Local Conditions Mean for Your Equipment
Manalapan is the only municipality in Palm Beach County where every single-family property sits between the Atlantic Ocean and Lake Worth Lagoon. That means every CGI window and door on the island takes salt-laden air from two opposing directions at once. In practical terms, it cuts hardware service intervals roughly in half compared to coastal towns with a single water exposure. A multipoint lock that would last eight to ten years in Delray Beach often needs attention in four to five years here. The strike plate corrodes on the ocean-facing latch side while the hinges pit from lagoon humidity on the opposite side. That’s not a product defect. That’s geography.
Our field vignette from Manalapan: our techs recently replaced a seized multipoint lock and pitted hinges on an Estate Series impact door at an estate on South Ocean Boulevard. The owner had noticed the handle sticking within four years of installation. We pulled the hardware, confirmed the strike plate was corroded on the ocean-facing latch side, and installed marine-grade stainless replacements before re-torquing the frame and lubricating every moving part. The fix restored effortless operation and stopped the intermittent blowback water leaks during summer squalls. That’s the kind of preventive hardware conversation we have on every estimate here now, because ignoring it costs more later.
We’ve built our CGI service practice around this reality. Learn more about our CGI sales & service approach and how we handle these systems across coastal South Florida.
CGI Models & Products We Service in Manalapan
We service the full CGI lineup you’ll find on Manalapan estates: the Estate Series impact windows and doors, Classic Series impact units, 960 Series impact windows, and 2100 Series casement and awning windows. The Estate Series is the one we see most here, since Manalapan’s larger custom homes favor big, architect-specified openings.
On parts, we’re specific about what we’ll use. OEM CGI hardware, especially Estate Series multipoint locks and hinges, stays OEM because the dimensional tolerances matter in a salt environment. For gaskets, glazing beads, and non-structural trim, we install marine-grade aftermarket materials that resist Manalapan’s dual-salt air better than the original parts. If a frame is heavily pitted or the insulated glass unit shows moisture, we say so plainly: replacement is usually more cost-effective than chasing corrosion on a 30-year-old frame.
CGI Service Pricing in Manalapan
CGI service pricing in Manalapan depends on what’s failing and how far the corrosion has gone. A hardware replacement on a single Estate Series door, lock body and hinges included, typically runs $400 to $900 depending on finish and part availability. Full-frame replacement on large-format Estate Series units starts around $1,800 per opening and goes up from there, especially on custom estate glazing with bronze finishes. Gasket and glazing bead replacement on a 960 Series window runs $150 to $350 per unit.
What drives cost in Manalapan specifically: finish matching on bronze hardware, access on oceanfront estates with limited staging room, and the reality that many of these homes need marine-grade upgrades rather than like-for-like parts. Our estimates are free and written line by line. You’ll see exactly what you’re paying for before any work starts. Call (954) 280-4413 to schedule yours.
Serving Manalapan, FL - Our Local Coverage Area
We’re based in the Manalapan area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - CGI Windows & Doors in Manalapan
Because Manalapan is the only Palm Beach County town where every property sits between the Atlantic and Lake Worth Lagoon, so your Manalapan Door Installation gets salt-laden air from two directions at once. That dual exposure corrodes multipoint locking hardware and strike plates in three to five years instead of the eight to ten you’d see with a single water exposure. We replace with marine-grade stainless that holds up far longer. Call (954) 280-4413 if your handle is starting to stick, and we’ll catch it before the lock seizes.
Yes, provided the installation is permitted and the specific Estate Series units carry Florida Product Approval or Miami-Dade NOA ratings for your opening size and location. We handle the permit pull and coordinate the inspection. The upper-end rating is what Manalapan inspectors want, not minimum Palm Beach County compliance. Book a free estimate and we’ll spec the right units on paper before anything gets ordered.
Yes. We quote manufacturer lines side by side on paper and can match most original CGI bronze finishes, though the exact tone can shift slightly with age and salt exposure. We’ll bring finish samples to the estimate so you see the match in your own light, not under a showroom bulb. Call (954) 280-4413 and we’ll schedule it.
Yes. Manalapan requires a permit for any change to a window or door opening when you’re altering the structural performance of the assembly, and impact-rated units are exactly that. We pull the permit, schedule the inspection, and close it out. It’s part of doing the job right; skipping it voids manufacturer warranties and creates problems at resale. Call (954) 280-4413 for a written explanation of what your specific project needs.
The lagoon side gets less wind but more still, humid air that hangs against the track and rollers. Salt crystallizes in the roller bearings, and the door starts to drag. The ocean side gets more moving air, which keeps the track drier. The fix is usually roller replacement and track cleaning, not a new door. Call (954) 280-4413 and we’ll confirm what’s actually failing before you spend anything.
Service Areas Near Manalapan
We serve Manalapan and the surrounding communities. If you’re in Manalapan service area neighborhoods or nearby coastal towns, we’re already in your area regularly. We also handle CGI work in CGI service in Mangonia Park and further south in CGI service in Marathon, along with the greater Palm Beach County coastline.
Book Your CGI Service in Manalapan Today
Call (954) 280-4413 for a free estimate. A live person answers the phone, 24 hours a day, seven days a week. Not a voicemail tree, not a callback form. We’ll set up a time, measure twice, and put your options on paper.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Manalapan and surrounding communities since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.