Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCGI Windows & Doors in Mangonia Park, FL | TruePane Windows & Doors
We service and replace CGI windows and doors across Mangonia Park, FL, as an independent provider, not a manufacturer affiliate. The one thing that sets our CGI work apart here is that we understand the code surprises of this specific municipality: pull a permit for a small storefront repair in Mangonia Park and Palm Beach County can require the entire glazed opening be brought to current wind-borne debris standards. Call (954) 280-4413 for a straight answer and a free estimate.
Why Mangonia Park Residents Choose Us for CGI Service
CGI glazing is expensive to replace and painful to replace wrong. We’ve been working glass and framing in South Florida’s coastal corridor since 2008, and Dale Kessler, our founder, learned the trade at McFatter Technical College in Davie before spending two decades putting impact-rated units into buildings from Coral Ridge to Dania Beach. He still insists on measuring twice before any crew touches a truck. When we work on CGI windows and doors in Mangonia Park, we carry OEM-compatible parts for Estate and Sentinel lines on the truck, not in a catalog. That means fewer second trips and less downtime for the small warehouses and storefronts that dominate this municipality.
Common CGI Windows & Doors Problems We Solve in Mangonia Park
- Aluminum frame pitting along bottom tracks of Estate sliders. The humidity here, compounded by the Intracoastal Waterway roughly three miles east, pushes salt-laden moisture into the weep channels. We see pitting and white oxidation crust on units that still look fine from the living room.
- Delaminating tempered glass in Sentinel fixed units. West-facing loading docks in Mangonia Park put afternoon sun directly onto fixed glass. The laminate between tempered panes begins to cloud and separate, and once that bond fails, the impact rating is compromised.
- Corroded stainless hardware on Targa swing doors. Salt air works into the pivot hinges and latch bodies. A door that binds in July, right when the humidity peaks, is usually a hinge that has swollen with corrosion rather than a simple alignment issue.
- Failed interlock seals on older CGI commercial storefront systems. Many Mangonia Park storefronts still have glazing installed before the 2002 Florida Building Code overhaul. The interlock gaskets dry-rot, water gets into the framing channels, and the wall cavity behind the glass begins to deteriorate.
- Hazy or fogged glass on residential units in 1950s-70s concrete-block homes. The limited residential stock in Mangonia Park often has original single-pane or early double-pane units with broken seals. What looks like a cleaning issue is usually argon loss and failed desiccant.
CGI Service in Mangonia Park: What Local Conditions Mean for Your Equipment
Mangonia Park is a predominantly industrial-commercial municipality. Window and door work here skews heavily toward warehouse overhead doors, loading-dock entries, and aluminum storefront glazing rather than the residential hurricane-impact replacements that dominate surrounding towns. Here is the checkable fact that shapes CGI work in Mangonia Park more than any other: many of the warehouse and light-industrial buildings here predate the post-2002 Florida Building Code overhaul and still carry original non-impact commercial storefront glazing. When a business owner pulls a permit for renovation, they often learn the entire glazed opening, not just the new section, must be brought into compliance with wind-borne debris impact standards. That turns a two-day storefront patch into a full re-glazing project. We explain this before the permit is pulled, not after the inspector shows up. Our crew recently serviced a CGI Estate horizontal slider on a 1968 concrete-block home off East Mangonia Drive near the railroad spur. The frame had corroded so badly at the weep holes that the panel would not lift out, and the glass had gone hazy between the panes. Both are standard failure modes for 20-year-old CGI in this humid corridor. We pulled a full opening permit, cut out the old aluminum, and rebuilt the rough opening to accept a new impact-rated CGI unit that meets current wind-borne debris code, because the county would not sign off on anything less.
CGI Models & Products We Service in Mangonia Park
We work on the full CGI line: Estate Collection impact windows, Sentinel impact windows, Targa Series impact doors, and commercial storefront and awning systems. For most repairs, we use OEM replacement parts, which covers weatherstripping, balances, and latch sets. CGI frame extrusions and hardware mates are proprietary enough that aftermarket tolerance issues end up costing more in callbacks than the savings are worth. We recommend full replacement over patch repair when the frame itself is corroded, or when the glass has lost its impact laminate. A failing CGI unit on a Mangonia Park warehouse can drag an entire storefront out of code compliance, and the county does not grandfather that.
CGI Service Pricing in Mangonia Park
CGI service in Mangonia Park, FL generally runs $180 to $340 for common hardware and weatherstripping repairs on a single window or door, while full impact-rated replacements for a 40-by-90-inch opening typically land between $1,400 and $3,800 depending on model, glass pack, and whether the existing frame is worth saving. Commercial storefront retrofits run higher because they usually involve pulling a permit and bringing the entire opening to current code. What drives the cost is simple: OEM parts vs. aftermarket, whether the opening needs structural work, and whether the county will accept a repair or requires a full replacement. Our free estimate includes a written line-item quote, so you see the numbers before any work is scheduled. Call (954) 280-4413 for an exact quote on your CGI windows and doors.
Serving Mangonia Park, FL - Our Local Coverage Area
We’re based in the Mangonia Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - CGI Windows & Doors in Mangonia Park
Because Mangonia Park sits inside Palm Beach County’s wind-borne debris region, and the Florida Building Code requires that any glazed opening touched by a permit-pulled renovation meet current impact standards. The county gives no grandfathering exception. So a broken pane in a 1990s storefront often triggers a full re-glazing requirement for the entire opening. We walk you through the code requirement before the permit gets pulled, so there are no surprises. Call (954) 280-4413 for a permit-level assessment.
Yes, if you are pulling a permit for the work. The building type does not matter. Palm Beach County’s wind-borne debris region applies to all permitted window and door replacements, residential or commercial. A 1960s block home gets held to the same wind-load standard as a new build. We can help you pick between impact-rated glazing and an approved shutter system, but the glazed opening itself has to meet code. Call us for a straight answer before you commit to a scope.
It is the combination of humid subtropical air and the Intracoastal Waterway about three miles to the east. Salt-laden condensation sits on aluminum surfaces, especially along bottom tracks and weep holes, and it accelerates oxidation well past what you would see ten miles inland. The fix is usually a thorough cleaning of the weep channels plus replacement of deteriorated weatherstripping, but if the frame itself has pitted through, full replacement is the honest repair.
We handle both. In fact, commercial storefront impact replacement and retrofit is a major part of our work in Mangonia Park, given the tilt-up concrete and masonry warehouses that dominate the area. We service CGI storefront and awning systems, plus sliding and swing doors, with the same OEM-parts approach and code compliance rigor we use on residential Estate and Sentinel units. One crew, one standard.
Then the county will not accept them on a permit application. Older CGI units installed before Florida’s product approval system took hold often lack a current NOA number, which means they are treated as non-compliant heritage glazing. We research the product line, contact CGI with the frame markings, and when the unit cannot be validated, we quote a compliant replacement. No paperwork fiction. Call (954) 280-4413 if you need a product approval check on an older Mangonia Park building.
Service Areas Near Mangonia Park
We provide Mangonia Park service area coverage plus CGI repair and replacement in neighboring communities across Palm Beach County and beyond. If you are looking for CGI sales & service in the wider region, we can help. Our crews also handle CGI service in Marathon and CGI service in Margate, so we are familiar with how coastal and inland conditions differ across the state.
Book Your CGI Service in Mangonia Park Today
If you need independent CGI repair, retrofit, or full replacement in Mangonia Park, call (954) 280-4413. We will give you a written line-item estimate and a straight answer on what the county will require. Our CGI sales & service attitude remains what it has always been: if it is not right on paper, it will not be right on the wall.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Mangonia Park and surrounding communities since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.