Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCGI Windows & Doors in Pinellas Park, FL | TruePane Windows & Doors
We provide independent CGI window and door service across Pinellas Park, from the Mainlands of Tamarac to the neighborhoods off Park Boulevard, and also offer CGI repair in Clearwater. The thing that separates our work here from any other city we serve: Pinellas Park’s original concrete block homes were framed for jalousie windows, and those rough openings are almost never sized for modern CGI impact units. So nearly every replacement becomes a full-frame job, not a swap. If you’re dealing with corroded CGI frames, failed seals, or a slider that binds in the humidity, call (954) 280-4413. We’ll give you a straight read on what’s worth repairing and what’s done.
Why Pinellas Park Residents Choose Us for CGI Service
We work on CGI windows and doors every week in Pinellas Park’s aging concrete block homes. That means we know the exact failure points of CGI’s SL Series, Estate Collection, and Classic line from hands-on teardown and rebuild, not from a manufacturer training binder. Dale Kessler, our owner, learned the trade in South Florida’s coastal corridor and has put in impact-rated units from Coral Ridge to Dania Beach, including Largo Cgi service work. He grew up watching his father reseal jalousie windows in Fort Lauderdale and curse the humidity, so the salt-corrosion issues we see in Pinellas Park aren’t new to us. We use genuine CGI parts whenever a frame, sash, or glazing bead is involved, because aftermarket extrusions rarely match the original alloy and anodizing. And we’ll be there when we say. A live person answers the phone around the clock, not a voicemail tree.
Common CGI Windows & Doors Problems We Solve in Pinellas Park
- Corroded anodized aluminum frames. Salt-laden air from Tampa Bay to the east and the Gulf of Mexico to the west attacks CGI’s anodized aluminum more aggressively here than in inland markets. We regularly replace screw bosses and lift rails on Estate casement and awning operators that have seized from corrosion. The hardware fails before the glass does, and a rebuild with OEM parts extends the unit’s life rather than forcing an early replacement.
- Stress cracks at corner welds on single-hung balances. We find this on older Pinellas Park homes where the original single-pane glass was swapped for heavier impact glazing without upgrading the spring tension. The added weight pulls on welds that were never sized for impact glass. The fix is a proper balance upgrade with the correct spring rating, not another patch.
- Sagging sashes from jalousie-to-impact retrofits. In CBS homes with original jalousie openings, we see CGI inserts that were retrofitted with expanding foam or undersized shims. Within a few years, the sash sags and the air seal fails. When this happens in the Mainlands of Tamarac, the repair usually means pulling the unit, rebuilding the buck, and reinstalling square. That’s a bigger job than most homeowners expect, and it’s exactly why we measure twice before quoting.
- Clogged or broken weep-hole covers on sliding doors. CGI sliding glass doors in Pinellas Park collect salt and fine sand in the weep system. Once the weep holes clog, water backs into the track and rots the sub-sill from the inside. We clean or replace the covers and check the drainage channel on every slider service call, because a quiet sub-sill rot is the repair that costs ten times more if it’s ignored for two hurricane seasons.
- Fogged or failed seals on original CGI Classic units. The original single-pane CGI units from the 1960s and 1970s were never meant to last fifty years in coastal air. When the seal goes and condensation builds between panes, we’ll tell you plainly: sometimes a $200 rebuild makes sense, sometimes a 40-year-old frame has reached the end. We won’t sell you a repair on a unit that’s done.
CGI Service in Pinellas Park: What Local Conditions Mean for Your Equipment
Pinellas Park’s original CBS homes were framed for jalousie windows, and the rough openings are non-standard for any modern CGI impact unit. City of Pinellas Park building inspectors flag jalousie-to-impact conversions frequently in the Mainlands subdivisions because the original openings are often 3/4 inch too narrow, too shallow, or both. Every full-frame CGI replacement here means buck removal, additional wood furring, and stucco repair on nearly every opening. That’s a multi-trade job, and it’s the reason out-of-town installers consistently underbid the work. During a full-frame impact install on 102nd Avenue North in the Mainlands of Tamarac, our crew removed a 1968 CGI Classic jalousie window and found the original CBS rough opening was 3/4 inch too narrow for the new Estate impact unit. We rebuilt the buck with pressure-treated lumber, squared the opening, and patched the exterior stucco before sealing the new frame with marine-grade stainless fasteners. The homeowner had been told by another company it was a same-day swap. Our prep work took an extra six hours and prevented a sure air leak. If the pane is not true, the job is not done.
CGI Models & Products We Service in Pinellas Park
We service the full CGI residential lineup: the Estate Collection, Classic Series, SL (Single) Series, and Therma Tique Series, with Cgi service in Seminole available as well. For frames, sashes, and glazing beads, we use genuine CGI parts because aftermarket extrusions rarely match the original alloy or anodizing. For hardware like rollers and latches, we offer both OEM and proven commercial-grade aftermarket options, and we’ll show you the price difference on paper before any work starts. We keep common CGI replacement rollers, balances, and weep covers stocked for fast Pinellas Park turnaround, so a slider repair in the Mainlands doesn’t wait on a parts shipment from Miami. TruePane is an independent CGI service provider. We are not manufacturer-affiliated or authorized, and that independence lets us give blunt advice about which CGI units are worth fixing and which should be replaced.
CGI Service Pricing in Pinellas Park
CGI service in Pinellas Park depends on what you’re fixing. A slider roller and weep-hole service typically runs $180 to $350. Replacing a corroded lift rail or rebuilding an Estate casement operator runs $250 to $600. A full-frame impact replacement, once you factor in the buck removal and stucco repair that Pinellas Park’s jalousie openings require, starts around $2,500 per opening and goes up with size and finish. A free estimate from us includes the full written scope: rough-opening work, furring, stucco patch, fasteners, and both warranty layers registered in writing before the truck leaves your driveway. That’s The Keystone Standard, and it’s on every job we do. Call (954) 280-4413 for an exact quote. Estimates are free, and a live person answers.
Serving Pinellas Park, FL - Our Local Coverage Area
We’re based in the Pinellas Park area and know this community well, and our Dunedin Cgi service covers that growing market too. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - CGI Windows & Doors in Pinellas Park
Pinellas County sits in a designated Wind-Borne Debris Region, so every replacement window and exterior door must carry a valid Florida Product Approval (FPA) number and meet design wind speeds around 130 mph. Your local permit office won’t sign off without it. We pull permits on every full-frame replacement and register the FPA documentation with the permit package, so the inspection passes the first time. Call (954) 280-4413 if you need help sorting out what your specific home requires.
You can repair jalousie windows, but Florida insurers are actively refusing to cover homes that still carry original louvered glass, because jalousies cannot meet wind-borne debris protection requirements. Repair keeps the window functional; it does not solve the insurance problem. We’ll give you a straight answer on what your insurer will and won’t accept before you spend a dollar.
In Pinellas Park, salt and sand from Tampa Bay and the Gulf accumulate in the track and weep system, and that grit wears the rollers and carriage long before the frame fails. A door that binds in July usually has corroded rollers or a clogged track, not a structural problem. We clean the track, replace the rollers with OEM or commercial-grade parts, and clear the weep holes so the water has somewhere to go. Call (954) 280-4413 and we’ll take a look.
We can get close on most original CGI finishes, but exact matching depends on how much the anodizing has faded. A frame that’s been in Pinellas Park sun for fifty years won’t match a brand-new extrusion from the factory. We’ll show you samples on paper before you commit, so there are no surprises when the new unit goes in.
An insert fits inside the existing frame; a full-frame replacement removes everything down to the rough opening and installs a new frame, flashing, and exterior finish. In Pinellas Park’s original CBS homes, the jalousie rough openings are usually too small or out of square for a proper CGI insert, so full-frame replacement is the fix that actually seals and lasts. We’ll measure the opening and tell you which one makes sense before you spend anything.
Service Areas Near Pinellas Park
We serve Pinellas Park and the surrounding communities across central Pinellas County and toward Tampa Bay. That includes Acacia Villas, Apollo Beach, and the neighborhoods along the bay side of the peninsula. You can also find us handling CGI sales & service throughout the region and beyond. For reference on other Florida markets, see CGI service in Plantation and CGI service in Plant City. Our Pinellas Park service area page has the full street-level coverage map.
Book Your CGI Service in Pinellas Park Today
Call (954) 280-4413 to schedule your free estimate. We’ll come out, measure your openings twice, and give you a written line-item quote before any work starts. If you have a slider that won’t slide or a CGI frame that’s corroding in the salt air, we’ll be there when we say we will.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Pinellas Park since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.