Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
CWS Windows & Doors in Weston, FL | TruePane Windows & Doors
CWS window and door service in Weston comes down to two questions: does the replacement clear Broward County’s High Velocity Hurricane Zone code, and does it match what your HOA’s architectural committee will approve on paper before any permit gets pulled. We’re an independent CWS service provider, not a factory-authorized dealer, which means we carry no incentive to push one replacement over another. We run every CWS job through both gates first, because a window that can’t get past the ARC meeting is a window that never gets installed. Call (954) 280-4413 for a free estimate.
Why Weston Residents Choose Us for CWS Service
We work on CWS windows and doors every week across Weston‘s gated villages, and we’ve learned the brand’s quirks the hard way: the roller channels that bind on 700 Series sliders, the balance systems that over-tension on early 500 Series single-hungs, the frame fasteners that corrode behind stucco reveals. Dale Kessler founded TruePane in 2008 after spending the better part of two decades working glass and framing in South Florida’s coastal corridor, and the rule on his whiteboard hasn’t changed: if the pane is not true, the job is not done. That standard applies to every CWS call, whether it’s a weatherstripping replacement in a Weston Hills slider or a full-frame impact conversion on an original 1994 800 Series horizontal roller. We pair hands-on CWS knowledge with a pre-permit HOA compliance review of frame profiles, grid patterns, and color specs, because Weston’s villages are deed-restricted and the architectural boards enforce those specs community by community. No manufacturer affiliation means no shortcut around those two gatekeepers.
When you call TruePane, a live person answers. That’s been true since 2008 and it’s not changing. Our technicians are background-checked, uniformed, and they measure every opening twice before a crew touches a truck. We write both warranty layers on paper before the truck leaves your driveway, which is part of The Keystone Standard on every job we take.
Common CWS Windows & Doors Problems We Solve in Weston
- Oxidized aluminum frames on early 1990s CWS 500 and 800 Series units. Weston homes built between 1990 and 1995 sat through three decades of Broward County humidity, and the village-edge lots catch the worst of it. Aluminum frames pit and powder, especially at the sill corners, and the original anodized finish flakes off in sheets. We strip what’s salvageable, but a frame that’s lost its structural lip to corrosion needs a full-frame replacement, not a reskin.
- Fogged or delaminated insulated glass units on CWS single-hung and fixed windows. The original Arvida-era installations used early argon-filled IGUs that weren’t built for 30 years of UV load. When the seal delaminates, you get fog between the panes that never clears. We replace the IGU with a modern insert sized to the original CWS frame opening, and we stock common Weston sizes to keep the turnaround short.
- Racked CWS sliding glass doors on homes built over former Everglades muck. Several Weston villages sit on what was once sawgrass marshland, and the soil settles. A CWS 700 Series slider that’s racked even an eighth of an inch loses corner seal contact, and the draft complaints start even though the rollers look fine. We re-anchor the frame, shim to true, and replace the corner gaskets with marine-grade material that holds up in this climate.
- Failed interlocking weatherstripping on CWS 700 Series sliding doors. After 25 years of heat cycling, the vinyl interlock gets brittle and no longer meets HVHZ air infiltration code. Homeowners feel the draft first, then notice the whistling on windy afternoons. We replace the interlock channel and pile weatherstripping, then run a smoke test to confirm the seal before we leave.
- Balance system failures on CWS 500 Series single-hung windows. The original block-and-tackle balances over-tension over time, and a sash that used to lift with one hand now needs two and still slams shut. We replace CWS balance systems with OEM units when they’re still supplied through independent wholesale channels, and we re-tension to the original spec so the window operates like it did in 1994.
CWS Service in Weston: What Local Conditions Mean for Your Equipment
Weston’s original 1990 to 2005 housing stock was built almost entirely under Arvida’s master plan, and the city’s e-permitting system now treats any CWS frame replacement as a substantial improvement requiring a Broward County HVHZ product approval. But that’s only the first gate. The HOA architectural committees in communities like Weston Hills and The Ridges still require the exact Arvida-era bronze or white frame profile and projected grid pattern before they’ll sign a permit. Contractors who pull Broward County building permits without first securing the HOA’s written approval in hand regularly hit stop-work orders and eat the cost of re-ordered frames in the correct finish. We’ve seen a Weston Hills homeowner pay for a full CWS 800 Series replacement twice because the first contractor ordered white frames, the checklist said bronze anodized, and the ARC committee flagged it on site. We run a dual-track CWS submittal on every job: the Broward permit package plus the village’s ARC application with a CWS spec sheet for the exact replacement model. Both clear before the first fastener comes out of a wall. If it is not right on paper, it will not be right on the wall.
Even 25 miles inland, Weston sits under sustained UV intensity and moisture-laden air that accelerate aluminum oxidation and seal delamination. A 20-year-old CWS unit in Weston is functionally end-of-life even if it opens and closes. The combination of the HVHZ code threshold and the HOA finishes requirement means an independent service provider who knows CWS’s model history is worth more than a big-box installer with a generic impact window catalog.
CWS Models & Products We Service in Weston
Our crews work on the full CWS product range still found in Weston homes: the 800 Series horizontal rolling windows, 500 Series single-hung windows, 700 Series sliding glass doors, and 300 Series casement and awning windows. We use CWS’s own balance systems, cam locks, and replacement sashes whenever they’re still supplied through independent wholesale channels, and we carry quality aftermarket IGU inserts and marine-grade hardware for discontinued 1990s CWS series. We repair rather than replace when the frame is square and the glazing is intact, but we always tell Weston homeowners the truth: a CWS unit from 1994 that’s already at HVHZ-code limits is usually a full-frame replacement candidate, not a sash swap. We know the difference, and we’ll show it to you on paper before any money changes hands.
One call to our team and you’ll get a side-by-side quote if replacement is the right call, covering CWS and comparable lines like PGT, CGI, and ES Windows. For service work on existing CWS units, we stock the high-demand parts locally so most Weston calls finish in a single visit.
CWS Service Pricing in Weston
Independent CWS service in Weston runs on the same square-deal pricing we use everywhere: line-item quotes on paper, no surprise entries on the bill, and no change orders unless the scope actually changes. Most CWS window and door service calls in Weston fall within these ranges:
| Service | Typical Price Range |
|---|---|
| CWS balance system replacement (per window) | $145-$280 |
| CWS weatherstripping replacement (per door) | $120-$260 |
| CWS IGU replacement (per window) | $210-$480 |
| CWS full-frame window replacement (per opening) | $900-$2,400 |
| CWS sliding glass door service (rollers, track, seal) | $180-$420 |
What drives the final number in Weston: whether the unit is a sash repair or full-frame replacement, whether the frame profile matches what your HOA demands, and whether the original opening was framed true. A free estimate from TruePane includes the measurement, a written line-item price, and the dual-track submittal review so you know the number before you sign. Call (954) 280-4413 to schedule yours.
Serving Weston, FL - Our Local Coverage Area
We’re based in the Weston area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - CWS Windows & Doors in Weston
Yes, and it happens regularly. Weston’s deed-restricted villages enforce architectural guidelines through ARC committees, and communities like Weston Hills and The Ridges require the original Arvida-era bronze or white frame profile, projected grid pattern, and door hardware match. If your contractor installs a CWS unit that doesn’t match the written spec, the HOA can issue a notice requiring correction at the homeowner’s expense. We pull the written ARC approval before the permit submittal, so the color question is settled in writing before the window is ordered. Call (954) 280-4413 if you need a CWS replacement reviewed against your village’s spec sheet.
Racked frames on settled soil. Several Weston villages were built over former Everglades muck, and the slabs settle unevenly over 25 years. The CWS 700 Series slider frame twists, the corner seals lose contact, and the door drafts even though the rollers and track look fine. We correct the rack, re-anchor the frame, and replace the corner gaskets, then test the air infiltration so it passes HVHZ standards. If the frame is too far gone, we’ll tell you straight: full-frame replacement is the better investment. Call (954) 280-4413 for an inspection.
Sometimes, but not as often as homeowners hope. If the frame is square, the glazing is intact, and the original frame profile matches what the HOA already has on file, a sash replacement with a CWS-compatible unit can work. But Weston’s HOA committees treat any change to the window line as a modification, and some will still require an ARC application even for a same-profile sash swap. We review the opening, check the existing spec against the ARC’s records, and tell you whether a sash replacement will clear or whether a full-frame replacement is the only path that passes both gates. Call (954) 280-4413 for a straight answer.
Florida Product Approval is enough for Broward County’s HVHZ compliance, provided the product’s approval documents cover the design pressure rating for the specific opening size and location. A Miami-Dade Notice of Acceptance covers higher test standards, but both satisfy the code when the unit is properly rated. What trips up Weston homeowners more often is the HOA review: the ARC committee cares about the visual spec, not the structural cert, and it’s the visual mismatch that stalls permits. We prepare both the product approval package and the ARC application so the right documentation is in front of the right reviewer. Call (954) 280-4413 for a compliance review.
Not always. Drafty windows in a 1994 CWS installation usually point to failed weatherstripping or degraded balance seals, not structural frame failure. We can replace the weatherstripping and re-tension the sashes, then run a pressure test to confirm the air infiltration rate. But your wind mitigation inspector cares about the glass type, frame construction, and the unit’s HVHZ rating. If the original units are early-generation aluminum frames with non-impact glass, a full-frame replacement with a current CWS or equivalent impact unit is the only way to pass the inspection and lower your premium. We’ll inspect and tell you honestly which path applies to your house. Call (954) 280-4413 for a free estimate.
Service Areas Near Weston
We run CWS service calls throughout Weston and into the neighboring communities. If you’re in Acacia Villas, Alafaya, Altamonte Springs, Altoona, Anna Maria, or Apollo Beach, we can schedule your CWS window and door work the same week in most cases. For our full coverage map, see our Weston service area page. We also provide dedicated CWS service pages for CWS service in West Palm Beach and CWS service in West Park. And for a broader look at the brand work we do, visit our CWS sales & service page.
Book Your CWS Service in Weston Today
If your CWS windows or doors need attention, call us at (954) 280-4413. A live person answers, and we’ll schedule a free estimate at your Weston home. Most CWS service calls in Weston are completed in a single visit, and every job carries our Done Right Promise backed by The Keystone Standard.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Weston since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After