Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterMarvin Impact Windows & Doors in Fort Lauderdale: What to Know First
We install, replace, and service Marvin impact windows and doors across Fort Lauderdale as an independent Marvin service provider. Most single-unit repairs are completed in one visit, and full-home impact retrofits typically run two to five days depending on opening count and existing framing. Our pricing is straightforward: a written line-item quote before work starts, no surprise charges on the back end, and a free estimate every time. If you own a Marvin product that is fogged, binding, or no longer closing square after a storm season, call (954) 280-4413 and a live person answers.
This page is for Fort Lauderdale homeowners who have Marvin windows or doors already installed, or who are weighing Marvin against other impact-rated lines for a retrofit. We will tell you what actually fails on these units in our climate, what repair costs look like, and when replacement is the honest call.
How Marvin Products Fail - and How We Fix Them
- Ultrex fiberglass frame deflection on wide openings. Marvin’s Infinity and Elevate lines use Ultrex fiberglass, which is strong but flexes more than aluminum on spans over six feet. We see this on oversized sliders in Rio Vista and Harbor Beach where the frame bows enough to break the weather seal. The fix is reinforcing the header and re-shimming the frame before rehanging the panel. Caught early, it’s a few hundred dollars. Ignored, it becomes a warped frame and a new door.
- Corner seal failure on Ultimate wood impact units. Marvin’s Ultimate line is beautiful, but the wood-to-cladding corner joints are the first place salt air gets in. Once the corner seal fails, you get a fogged insulated glass unit within two to three seasons. We remove the sash, strip the failed sealant, apply a marine-grade sealant, and reset the glass. The sash stays true and the warranty documentation is updated in writing.
- Roller and track wear on Signature sliding doors. Marvin Signature sliders ride on stainless steel rollers, which is good, but the tracks collect sand and shell grit that grinds the rollers flat. In Lauderdale-by-the-Sea and Victoria Park, we replace roller assemblies on Signature doors more than any other single repair. If the door is dragging or you have to lift it to close it, the rollers are gone. We stock both OEM and a heavier aftermarket roller that outlasts the original in coastal conditions.
- Interlock misalignment on French impact doors. On Marvin French door pairs, the astragal interlock drifts as the slab settles and the hinges wear. The doors still latch, but the interlock gap lets wind-driven rain through at the meeting stile. We re-hang the active leaf, shim the hinges, and realign the interlock so both panels seat evenly. This is a one-visit repair if the slab has not shifted more than a quarter inch.
- Hardware fatigue on casement and awning operators. Marvin casement and awning windows rely on a gear-driven operator that corrodes faster in Fort Lauderdale’s salt air than anywhere inland. The symptom is a crank that spins without moving the sash or binds hard at the last two inches of travel. We replace the operator with a corrosion-resistant assembly, re-lubricate the hinge track, and test the full throw. Simple job, but it keeps the window from being permanently propped shut with a dowel.
Our Marvin Impact Windows & Doors Process
- 1
You call, a person answers. A live voice at (954) 280-4413, 24 hours a day. We ask what the window or door is doing, what brand and series it is, and when it started.
- 2
We come out and look. A background-checked, uniformed technician measures every opening twice, checks plumb and level, and diagnoses the actual failure. If it is not right on paper, it will not be right on the wall.
- 3
You get a written quote. Line items for parts and labor, OEM versus quality aftermarket options stated side by side, and the exact cost. No allowances, no open-ended language.
- 4
We do the work. Whether it is a roller replacement on a Signature slider or a full impact retrofit on an Ultimate French door, the repair is done to manufacturer spec and our own standard.
- 5
We test everything. Operation, seal, interlock, and wind load rating are checked before we clean up. Both manufacturer warranty layers are registered in writing before the truck leaves your driveway.
- 6
You get the Done Right Promise. If it is not done right, we make it right. No paperwork fights, no arguing.
What Marvin Impact Windows & Doors Costs in Fort Lauderdale
Marvin impact repair and replacement pricing in Fort Lauderdale depends on the series, the opening size, and whether you are fixing a unit or buying new. Here is what we typically see in this market:
- Roller or track replacement on a Signature slider: $220-$480 per panel
- Operator and hinge rebuild on a casement or awning: $160-$380 per window
- Corner seal repair and glass reset on an Ultimate wood sash: $340-$720 per sash
- Interlock realignment on a French door pair: $280-$550 per pair
- Full impact retrofit with Marvin Elevate or Infinity units: $1,100-$2,400 per opening, installed
What moves the price is the condition of the rough opening, whether the existing frame can be salvaged, and whether you need low-E glass upgrades or custom sizing. We give you the number in writing before any work begins. Call (954) 280-4413 for a free estimate and an exact quote on your Marvin job.
Why Fort Lauderdale Homeowners Call TruePane Windows & Doors for Marvin Work
We have been serving local communities since 2008, and Dale Kessler founded TruePane in 2008 on a principle that out-of-true installs and voided warranties were problems worth fixing permanently. The Keystone Standard means both manufacturer warranty layers are registered in writing, durations stated, before we leave your driveway. Our techs know Marvin products because we see them every week in Fort Lauderdale, from Coral Ridge to Sailboat Bend. We also install and service Andersen, Pella, and PGT, so if a Marvin unit is beyond repair, we can quote you side-by-side alternatives on paper. And our Done Right Promise means if it is not right, we make it right. No fine print.
FAQs
No, not when the work is done by a qualified independent contractor using manufacturer-spec parts and methods. We document every repair and register both warranty layers in writing, so your original Marvin coverage stays intact. Call (954) 280-4413 if you want us to look at the unit and confirm what is covered.
Most Marvin parts, including rollers, operators, and weatherstripping, are available to us within three to five business days. For custom hardware or discontinued series, sourcing can take two to three weeks. We will tell you the timeline honestly before you commit to the repair.
If the frame is square, the glass is intact, and the failure is mechanical like a roller or operator, repair is the smart money. If the frame has deflected, the corner seals are gone, or the insulated glass has failed on multiple sashes, replacement usually costs less over five years. We will show you both numbers on paper and you decide.
Yes. We work in condominium and high-rise buildings throughout Fort Lauderdale, and we coordinate with building management on freight elevator access, glass handling, and work hours. Call (954) 280-4413 and we will walk you through the building requirements.
Yes. Every estimate is free, written, and line-itemed. Call (954) 280-4413 and we will schedule a time to measure your openings and give you a number that does not change once work starts.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Fort Lauderdale and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.