Simonton Window Replacement Nationwide | TruePane Windows & Doors

Simonton Window Replacement: The Fort Lauderdale Owner’s Guide

We stock and install Simonton-compatible window replacement parts in Fort Lauderdale, with most sash, balance, and hardware swaps running $180 to $420 installed depending on your model and what failed. If you call before noon, we can usually get a technician to your home the same day. Most homeowners discover the problem the way you probably did: a sash that drops two inches when you let go, a crank that spins without moving the window, or a lock that has not lined up since the last tropical storm season. Simonton windows are good units, but Fort Lauderdale’s salt air and humidity are rough on hardware, and the failure is rarely the glass itself.

Call (954) 280-4413

Key Takeaways

• Simonton replacement parts are model-specific; matching the wrong series wastes your time and money
• We carry common Simonton balances, pivots, and locks on the truck; odd sizes we source within days
• Installed pricing runs $180 to $420 for most replacements; impact-rated sashes cost more
• We are an independent installer, not a Simonton-owned operation, and we warranty our work for 90 days
• Call (954) 280-4413 for a free estimate on any Simonton window replacement in Fort Lauderdale

Which Simonton Models This Applies To

Simonton has built several distinct series over the years, and the replacement part for a 5500 Reflections window will not fit a 9800 Impressions unit. The most common lines we see in Fort Lauderdale homes are the Reflections 5050 and 5500 series, the Impressions 9800, and the older ProFinish and VantagePointe models. If you are not sure which series you have, check the label etched into the corner of the glass: Simonton stamps the series code and manufacturing date there, usually starting with “SIM” followed by numbers. We also match by measuring the sash thickness and the balance shoe profile, because the balance system is where Simonton changed specifications most often between series and even between production years.

There is an OEM-versus-aftermarket decision with Simonton parts, and we are honest about it. The original Simonton balance or pivot bar from the factory is always our first choice, particularly for impact-rated windows where the hardware works as part of the overall structural rating. But some older Simonton lines are discontinued, and when that happens, a quality aftermarket equivalent from a supplier like Truth Hardware or Caldwell is often the only practical option. We will tell you which we are quoting and why, and we put it on paper. If it is not right on paper, Dale Kessler will tell you, it will not be right on the wall.

Signs Your Simonton Window Replacement Is Failing

The five symptoms below account for about ninety percent of the Simonton window replacement calls we run in Fort Lauderdale.

• The sash drops or slams shut. This means the spring balance or block-and-tackle balance has lost tension. In coastal Fort Lauderdale air, the spring coils corrode faster than the manufacturer’s inland lifespan estimates, often within seven to ten years.
• The crank turns but the sash does not move. On Simonton casement windows, the operator gear strip wears down, especially on windows facing east with constant morning sun. The operator is a replaceable part, not a reason to buy an entire new window.
• The window will not lock or the lock is loose. Simonton’s die-cast zinc locks are durable, but after years of salt air they can seize or the keeper can bend. A mismatched lock is a security issue and a draft source.
• The window is hard to lift or sticks halfway. Dirt and salt deposits bind the vinyl channels, and the pivot bar can slip out of the shoe. Cleaning sometimes helps, but a bent pivot bar means the shoe is probably damaged too.
• Condensation appears between the glass panes. This is a failed insulated glass unit, not a hardware part. We replace the IGU, and for Simonton windows in Fort Lauderdale we match the low-E coating and argon fill so the new unit performs like the original, or better.

Replacement Cost & What’s Included

For most Simonton window replacement work in Fort Lauderdale, installed pricing lands between $180 and $420 per window, and here is what drives the spread. A single pivot bar and balance shoe might run toward the low end. Replacing both balances on a double-hung sash, or swapping a casement operator and hinge set, lands mid-range. Impact-rated Simonton sashes and full IGU replacements sit at the top of the range. The price you get from us is the price on the final bill: parts at our cost plus labor, stated clearly before work begins. We have built our reputation in Fort Lauderdale on a square deal, and that means no surprise line items and no change orders handed to you after the fact.

Every Simonton window replacement we install comes with our Done Right Promise: if the part or the installation is not right, we come back and make it right, no arguing and no fine print. We also register the manufacturer warranty on your replacement parts in writing before we leave the driveway. That is The Keystone Standard, and it applies to every job, whether the window is an original Simonton from 1998 or a Reflections series from last year.

DIY or Call Us?

Some Simonton window replacement tasks are genuinely simple, and we will not pretend otherwise. If your window just needs a new lock keeper or a replacement crank handle cover, an owner with a Phillips screwdriver and fifteen minutes can handle it. Those parts cost a few dollars at a hardware store, and if that is all you need, we would rather you save the service call.

The balance system is a different story. Simonton double-hung windows use a tensioned spring balance, and removing the sash without releasing the tension properly can send a metal spring flying with enough force to cause real injury. Pivot bars and shoes, impact-rated sash replacements, and any IGU work are tasks where the cost of a mistake is a broken window, a voided warranty, or an injury. That is when you call (954) 280-4413. Our technicians arrive in uniform, background-checked, and trained on Simonton’s specific balance and pivot systems, and we measure every opening twice before ordering parts.

FAQs