Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterES Windows Window Installation in Fort Lauderdale: What to Know First
We install ES Windows throughout Fort Lauderdale as an independent ES Windows service provider, and most jobs are completed in a single visit once the unit is on site. A typical ES Windows installation in Fort Lauderdale runs between $650 and $1,400 per opening depending on the series, size, and whether the existing frame needs rework. If you’ve got ES Windows going in or coming out, call (954) 280-4413 and a live person will answer.
This page is written for homeowners who already own ES Windows products and need them installed correctly, or who are weighing ES Windows against other lines and want straight talk on how these units hold up in South Florida’s humidity and storm season. We’ve put ES Windows into homes from Victoria Park to Rio Vista, and we’ve also pulled out ES Windows that were installed wrong the first time. The difference usually comes down to three things: the flashing, the squareness of the rough opening, and whether anyone bothered to shim the frame before driving fasteners.
How ES Windows Products Fail - and How We Fix Them
ES Windows are solidly built units, but every window line has its weak points. These are the ones we see most in Fort Lauderdale homes, based on years of service calls:
- Water intrusion at the sill on ES vinyl sliders. This is the most common call we take in Fort Lauderdale. The weep system on certain ES slider series gets blocked by salt film and fine sand, which is just what the coastal air delivers. Water pools in the track, then finds its way under the sill. The fix starts with cleaning the weeps and checking the sill pitch, then resealing the exterior flange with a urethane-based sealant that handles UV and salt. In Rio Vista and Las Olas, where houses sit close to the Intracoastal, we see this more than anywhere else in the city.
- Sash drag on ES single-hung units installed with drywall screws. When an installer anchors the frame by screwing through the jamb without shimming behind it, the jamb bows inward. The sash then drags or sticks about halfway down. We remove the stops, pull the old fasteners, and reset the frame with composite shims at every anchor point so the reveal stays even from top to bottom. It’s not glamorous work, but it’s the kind of thing that separates a window that opens for thirty years from one that fights you every July.
- Condensation between panes on early-2000s ES insulated units. The seal around the butyl spacer in some ES insulating glass units from that era fails after roughly fifteen to eighteen years in this climate, which shows up as fog between the glass that won’t wipe off. There’s no resealing a failed IGU once the desiccant is saturated. The correct fix is a replacement sash or IGU ordered to spec, and that’s a job we handle without making you replace the whole frame.
- Racking in ES casement frames on block construction. Fort Lauderdale homes built with concrete block don’t give the same way wood framing does. If an ES casement frame gets anchored too tight against an out-of-true opening, the frame racks and the operator arm wears out prematurely. We measure the rough opening in six places before we order, not two, and we’ll tell you honestly if the opening needs a carpenter before the window goes in. Better to fix the opening than fight the window forever.
- Roller failure on ES horizontal sliders near the beach. The carriage rollers on sliding window panels corrode fast around salt air. Owners often call thinking they need a full replacement when what they actually need is a roller set, cleaned tracks, and a fresh silicone lubricant. We’ll quote both options and let you decide. If the track itself is pitted, that changes the math, but a good technician checks before recommending a new window.
Our ES Windows Window Installation Process
Every ES Windows job follows the same sequence, whether it’s one casement in Sailboat Bend or a whole house of fixed and picture windows in Coral Ridge.
- 1
Call and measure. You call (954) 280-4413. A live person answers. We set a time, and a uniformed technician brings a laser measure and a notebook.
- 2
Open the wall honestly. We measure the rough opening in six places and check for rot, termite damage, or block irregularities. If the opening isn’t square, we tell you before we order.
- 3
Parts and series verification. We identify the exact ES series and hardware type, then decide with you whether OEM or a quality aftermarket component makes sense for the job. We quote both on paper.
- 4
Set the frame, square and shimmed. We shim at every anchor point, check the reveal with a level, and fasten to structure, not drywall. Flashing goes on per Fort Lauderdale code.
- 5
Glaze, seal, and test. The sash goes in, the sealant goes on, and we run the window through its full travel. If it binds, we fix it before we leave.
- 6
Warranty registration before we leave. Both manufacturer warranty layers get registered in writing, with durations stated, before the truck pulls away. That’s The Keystone Standard.
What ES Windows Window Installation Costs in Fort Lauderdale
Straight numbers, no games. These reflect what we’ve charged on recent ES Windows jobs in Fort Lauderdale, and they give you a workable budget before you call.
- Single ES casement or awning window install: $650 to $950
- ES single-hung or double-hung install: $700 to $1,100
- ES sliding window install in an existing opening: $800 to $1,200
- ES fixed or picture window install: $600 to $1,000
- Bay or bow window install with structural rework: $2,200 to $4,500
What moves the price is the opening condition, the floor you’re on, and whether we’re doing a straight swap or opening up the wall. Second-story work adds a modest line item for staging and safety. Fort Lauderdale’s block construction means fewer surprises than wood-framed homes in older parts of the county, but the surprises cost more when they happen. Call (954) 280-4413 and we’ll give you a written line-item quote before any work is scheduled.
Why Fort Lauderdale Homeowners Call TruePane Windows & Doors for ES Windows Work
We’ve served Fort Lauderdale and the surrounding communities since 2008, with Dale Kessler founding TruePane in 2008 on a simple rule: if the pane is not true, the job is not done. Our technicians are background-checked and uniformed, and they work in your home the way they’d work in their own mother’s. When a job is done, it’s covered by the Done Right Promise: if it’s not right, we make it right, with no paperwork fights and no arguing.
Because we’re authorized for more than a dozen lines including Andersen, Pella, and PGT, you’re never stuck with a “take it or leave it” recommendation. If we’re replacing an ES unit and another brand honestly fits the opening better, we’ll put the quotes side by side on paper and let you see the numbers. If a component is backordered from ES Windows, we’ll tell you the real timeline and show you alternatives. We answer the phone ourselves, 24 hours a day, because the company that installs your windows should be the one that answers when you call about them ten years later.
FAQs
In most cases, yes, or it substantially weakens a warranty claim. ES Windows requires installation to their published specifications, and a DIY install with improper flashing or anchoring gives the manufacturer a reason to deny a claim. When we install, both manufacturer warranty layers are registered in writing before our truck leaves the driveway, with durations stated. Call (954) 280-4413 if you have an existing ES window you’re unsure about.
Most single-unit installs are done in one visit, typically four to six hours on site. Multi-window jobs may run two to three days depending on the openings, but we schedule the whole job before we start and we’ll be there when we say. Bad weather is the only thing that changes a schedule, and we call you before you have to call us.
Yes, in most series we can order matching units or equivalent hardware. We still carry or can source parts for several older ES lines that are still in service around Fort Lauderdale. Bring us the model number if you have it; if not, we’ll pull the identification from the frame during the measure.
If the failure is a roller, a balance, a seal, or a handle, repair is usually the better money. If the frame has water damage or the glass is fogged from seal failure on an older IGU, replacement of the sash or the full unit starts to make more sense. We’ll tell you which one we’d do if it were our house, and we’ll put both options in writing. Call (954) 280-4413 for a free estimate.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Fort Lauderdale and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.