Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterECO Window Systems Impact Windows & Doors in Fort Lauderdale: What to Know First
We provide independent ECO Window Systems impact windows and doors service in Fort Lauderdale, and most repair calls we handle are diagnosed and fixed in a single visit. A typical repair on an ECO impact unit runs between $185 and $575 depending on what failed, while full replacement work starts around $1,100 per opening and goes up from there. This page is for homeowners in Fort Lauderdale who already own ECO Window Systems products and need straight answers about keeping them watertight, operable, and up to code. Call (954) 280-4413 and you’ll get a live person, not a phone tree.
How ECO Window Systems Products Fail - and How We Fix Them
ECO Window Systems builds a solid impact-rated product, but South Florida salt air, humidity, and afternoon thunderstorms expose weak points in any aluminum and glass assembly. Here’s what we actually see on ECO units in Fort Lauderdale homes:
- Roller wear on ECO 6000 Series sliding glass doors. The OEM rollers on early 6000 Series doors use a nylon wheel that grinds down against the track after six to eight years of salt-laden air. The door gets heavy, then binds, then stops locking. We swap in stainless or high-density polymer aftermarket rollers that outlast the originals, and we re-align the panel so it seats square against the weatherstripping.
- Weep hole clogging on impact casement windows. Fort Lauderdale’s summer downpours push dirt and debris into the sill track, blocking the weep holes on ECO casement and horizontal roller units. Water backs up, sits against the frame, and eventually finds its way inside during a wind-driven storm. We clear the drainage path and, where the original holes are undersized for our rainfall volume, add auxiliary drainage without touching the structural integrity of the frame.
- Interlock separation on ECO 5000 Series mulled units. When two or more impact windows are mulled together in one opening, the center mullion carries a lot of load. On some ECO 5000 Series installs we see the interlock screws loosen over time, which lets the units flex independently during high wind. The fix is a full re-mull: we remove the old hardware, reset the mullion, and torque everything to spec before re-flashing the exterior joint.
- Warped lift rails on ECO single-hung impact windows. The lift rail on older ECO single-hungs is a formed aluminum channel that can bow if the window is forced open against a locked sash. Once it bows, the lock won’t fully engage. We replace the rail, inspect the lock keeper, and set the sash tension so the window opens without needing a shoulder behind it.
- Fogged glass on ECO fixed and transom units. Impact-rated laminated glass has an interlayer and a sealed air space, and when the perimeter seal fails, that’s when the window fogs. We can’t restore a failed IGU in place; it has to be replaced as a sealed unit. We order the replacement IGU sized to the exact daylight opening, with the correct thickness to match the impact rating of the original.
One thing we want owners to know: ECO Window Systems products are built to meet Miami-Dade and Broward County impact standards, but no impact product is maintenance-free. The hardware, the drainage, the sealing, and the track all need attention in a coastal climate. That’s the work we do all year in Fort Lauderdale.
Our ECO Window Systems Impact Windows & Doors Process
Here’s how a typical ECO Window Systems job goes when you call us:
- 1
Diagnosis on the first visit. Our technician examines the unit in place: operation, locking, drainage, glass condition, and frame anchoring. We measure every opening twice, even on a simple roller swap.
- 2
Straight talk on repair versus replace. If the frame is structurally sound and the glass is clear, we repair the hardware or seal and leave the opening as-is. If the frame is corroded through or the glass has failed, we tell you before any parts get ordered.
- 3
Parts decision, on paper. We quote OEM and quality aftermarket options side by side. For most ECO hardware, either path works. For anything that affects the impact rating like the glass unit or the anchoring clips, we use only manufacturer-approved components.
- 4
The repair or replacement. We do the work, set the unit square and level, and register both warranty layers in writing before the truck leaves your driveway. That’s the Keystone Standard, and it’s on every job we do.
- 5
Test and walkthrough. We cycle the window or door, check the drainage, run water over the sill if it’s a door, and walk you through what we touched and why.
- 6
Done Right Promise. If anything we did isn’t right, we come back and make it right. No paperwork fight, no argument.
What ECO Window Systems Impact Windows & Doors Costs in Fort Lauderdale
Here’s what ECO Window Systems work typically runs in Fort Lauderdale:
- Roller replacement on an ECO sliding door: $185-$340 per panel
- Weep hole clearing and track service: $120-$225
- Interlock repair on a mulled unit: $275-$525
- Fogged IGU replacement in an ECO impact window: $450-$850 depending on size and Lami/impact certification
- Full ECO impact window replacement: $1,100-$2,400 per opening installed
- Full ECO impact sliding door replacement: $2,800-$5,600 depending on panel count and size
What moves the price: whether we’re repairing hardware versus replacing glass, the size of the unit, ladder or lift access, and whether the existing frame is in salvageable shape. Every estimate is a square deal: a written line-item quote, no hidden fees, and no surprise change orders at the end. Call (954) 280-4413 for an exact quote on your ECO Window Systems opening. Estimates are free.
Why Fort Lauderdale Homeowners Call TruePane Windows & Doors for ECO Window Systems Work
Dale Kessler grew up in Sailboat Bend, went through the building trades program at McFatter Technical College in Davie, and spent two decades working glass and framing from Coral Ridge to Dania Beach before founding TruePane. He’s the same person who answers the phone on a Saturday night, and his rule has never changed: if the pane is not true, the job is not done. That’s why we register both manufacturer warranty layers in writing and back every job with a Done Right Promise. Our technicians arrive uniformed, background-checked, and prepared, and they work in your home the way they would work in their own mother’s. We also service Andersen, Pella, and PGT impact lines for homeowners who have mixed brands across the house.
FAQs
No, we operate as an independent ECO Window Systems service provider in Fort Lauderdale, which means we answer to you, not to a manufacturer’s warranty department. We are authorized installers for more than a dozen other manufacturer lines, but for ECO products we work independently, which often lets us offer faster service and more flexible repair options. Call (954) 280-4413 and we’ll tell you exactly what your unit needs.
For structural or glass repairs, the work should always be done with manufacturer-approved components to keep your original warranty intact, and that’s the standard we hold on every ECO job. For hardware items like rollers, latches, and weatherstripping, we’ve found that quality aftermarket parts often outlast the OEM version without affecting the frame or glass warranty. We document everything in writing and register warranty layers before we leave.
Most ECO Window Systems repairs in Fort Lauderdale are done in a single visit, usually within two to three hours on site. The exception is a fogged or impact-rated glass unit, which requires ordering a replacement IGU sized to the exact opening, and that typically takes five to ten business days after measuring. We’ll tell you the timeline before any work starts.
Our rule is simple: if the frame is structurally sound and the glass is clear, repair it. If the frame is corroded through, the glass has failed, or the unit no longer meets current wind-load requirements for your Fort Lauderdale zone, replacement is the honest answer. We’ll show you the numbers on paper and let you decide.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Fort Lauderdale and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.