Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterVLX 80 Casement Window in Fort Lauderdale, FL | TruePane Windows & Doors
The VLX 80 Casement Window is a side-hinged aluminum window with ultra-narrow sightlines and maximum ventilation. It’s the window Fort Lauderdale homeowners choose when they want the widest possible opening, a clean modern profile, and glass area that dominates the frame instead of metal. As an authorized ViewLux installation partner, TruePane Windows & Doors supplies and installs this window across Broward County, backed by our own installation workmanship and the manufacturer’s warranty. Call (954) 280-4413 to talk specs, pricing, or schedule a free measurement.
Product Overview - VLX 80 Casement Window
The VLX 80 is built around a simple idea: the frame should disappear. With a profile width of just 1.97 inches and a wall thickness of 0.079 inches, the aluminum extrusion is strong enough for Florida wind loads but slim enough that the glass, not the metal, is what you notice. The sash is hinged on the side and swings outward with a crank mechanism, which means the entire window opening becomes ventilation area when fully open. There’s no center mullion, no fixed panel, no obstruction. In a Fort Lauderdale home where cross-breeze is the difference between running the AC and opening the house in January, that matters.
Casement windows are the architect’s pick for mid-century modern and contemporary homes, but they work just as well on a 1980s ranch in Plantation or a new build in Victoria Park. The VLX 80 pairs narrow aluminum sightlines with the reliability of a multi-point locking system, so you get the look without sacrificing security. We recommend this series for kitchens over sinks, bathrooms, living rooms with a view of the Intracoastal, and any opening where hopper or slider hardware would feel clunky. TruePane Windows & Doors has installed the VLX 80 in high-rises, single-family homes, and townhouses throughout Fort Lauderdale, and feedback from clients consistently points to three things: the window opens effortlessly, the sightlines are genuinely slim, and the frame stays cool to the touch even in August.
The aluminum is extruded with a thermal break separating the interior and exterior metal, which is the only reason an aluminum window can perform thermally in South Florida. Without that break, a metal frame conducts heat straight into your house. With it, the VLX 80 holds its own against vinyl and wood on energy performance while beating both on structural longevity. Salt air doesn’t warp aluminum. Humidity doesn’t swell it. Termites don’t eat it. For Fort Lauderdale specifically, that’s the whole argument.
Technical Specifications
- Frame profile width: 1.97 in. overall extrusion depth, engineered for a slim sightline without compromising structural rigidity.
- Aluminum wall thickness: 0.079 in. on frame and sash members, above the minimum for impact-rated applications when paired with laminated glass.
- Operation: Side-hinged casement with low-friction crank hardware, full 90-degree opening.
- Glass options: Clear, Frosted, Low-E, Tempered, and Laminated (impact-rated per Miami-Dade and Broward requirements when specified).
- Finish options: Premium Black, Pure White, Anodized Silver, Bronze, Champagne, and Teak Wood.
- Screen options: Fixed Screen or Retractable Screen, both removable from the interior.
- Sill options: Standard Sill or Low-Profile Sill for access-friendly and contemporary installations.
- Performance standard: NFRC-rated thermal performance via thermal break technology; wind-load rating compatible with Florida Building Code zones when configured with impact glass.
Performance Features
Thermal Efficiency
The VLX 80 uses a true thermal break, meaning the interior and exterior aluminum are separated by a low-conductivity barrier. When paired with Low-E glass, the assembly carries an NFRC rating that holds up to Fort Lauderdale’s year-round cooling load. You’ll feel the difference near the glass on a July afternoon.
Acoustic Performance
Aluminum frames with laminated glass are one of the best combinations for cutting traffic and street noise. In Fort Lauderdale neighborhoods near Federal Highway, US-1, or the Brightline rail corridor, we spec the VLX 80 with laminated glass regularly. Sound control ratings improve noticeably over single-pane or double-pane with clear glass.
Airtightness & Weather Seal
The casement design compresses the sash against the frame with multi-point locking, which gives you a far tighter seal than a sliding window. Add in the AAMA 812 low-expansion foam sealant we apply to every perimeter joint during installation, and the result is a window that doesn’t leak air even when a summer squall pushes wind against the glass.
Waterproofing
Water is the enemy of every window in Fort Lauderdale, where afternoon downpours come sideways. The VLX 80 has an engineered sill and integrated weather gaskets that direct water away from the interior. Our installers then create a secondary drainage plane at the rough opening so any water that gets past the exterior cladding exits where it’s supposed to: outside, not into your wall cavity.
Wind Resistance
Fort Lauderdale sits in a High Velocity Hurricane Zone for building code purposes. The VLX 80, when ordered with impact-rated laminated glass, is wind-load rated for the demands of this region. Crank hardware and multi-point locks hold the sash tight to the frame, which prevents the flexing that causes wind-driven rain penetration on cheaper windows.
Security & Hardware
Casement windows are already one of the hardest window types to force open from outside, because without breaking the glass there’s no way to reach the crank. The VLX 80 adds multi-point locking hardware that engages at several points around the sash, not just one latch. Tempered or laminated glass options add another layer for ground-floor openings and entryway-adjacent windows throughout Fort Lauderdale.
Color & Glass Options
There are six finishes for the VLX 80, and they’re all powder-coated or anodized for decades of salt-air exposure. Premium Black is our most-requested finish in Fort Lauderdale right now, especially on white stucco homes in neighborhoods like Rio Vista and Coral Ridge where the contrast is sharp. Pure White blends into traditional Florida homes and rental properties where a clean but quiet look works best. Anodized Silver has that metallic, commercial-storefront feel that suits loft-style interiors downtown. Bronze and Champagne are warmer metals that pair beautifully with wood-look tile and terracotta roofs in older Fort Lauderdale neighborhoods. Teak Wood is a wood-grain powder coat for anyone who wants the look of timber without the maintenance of actual wood in South Florida humidity.
Glass selection depends on where the window goes and what matters most to you. Clear is the budget option, best for interiors and secondary openings. Frosted works for bathrooms, side yards, or any window where you want light but not visibility. Low-E is our default recommendation for any sun-facing elevation in Fort Lauderdale; it blocks the solar heat that drives up cooling bills from March through October. Tempered is a safety mandate for code in some locations and a smart upgrade everywhere else. Laminated is the impact-rated choice, required if you’re in a barrier-island property, opening up insurance credits, and worth considering anywhere in Broward where a broken pane during a storm could become a bigger problem.
Installation by TruePane Windows & Doors in Fort Lauderdale
A window is only as good as the opening it’s installed into. This is the part most homeowners don’t see until something fails, and it’s the part we obsess over. Every VLX 80 Casement Window installed by TruePane Windows & Doors follows the same process in Fort Lauderdale, whether it’s one window or forty.
We start with a pre-install inspection of the rough opening. We’re checking for rotted framing, improper flashing from the original build, out-of-square openings, and any signs of water that’s been getting in undetected. If we find a problem, you see photos and a written recommendation before we proceed. Nothing gets covered up. Then the new window goes in level, plumb, and square. That’s not a slogan; it’s measured at every installation. An out-of-square casement will bind at the hinge, wear the crank hardware, and eventually leak. You can’t fix a crooked rough opening with shims and hope. We frame the opening correctly first.
Perimeter joints are sealed with AAMA 812 low-expansion foam, which fills the gap without bowing the frame. Exterior flashing is applied to shed water away from the opening. The install meets AAMA 2400/2410 guidelines, which is the recognized standard for window installation in Florida. After the window is set, we water-test the exterior, cycle the hardware, adjust the sash alignment, and clean the job site before we leave. You shouldn’t be able to tell we were there except for the new window.
One thing we tell every Fort Lauderdale homeowner: an improperly installed window voids the manufacturer’s warranty. Not mostly voids it. Fully voids it. If you buy a VLX 80 from an online discounter and have a handyman put it in, ViewLux has no obligation to you when the seal fails or the hardware breaks. When TruePane Windows & Doors installs it, you have an authorized partner standing behind the product and the installation. In this climate, that’s not a nice-to-have. It’s the difference between a window that lasts 15 years and one that leaks by the second rainy season.
Frequently Asked Questions - VLX 80 Casement Window
Most VLX 80 orders arrive at our Fort Lauderdale warehouse within 4-6 weeks from the date the order is finalized, but custom sizes or laminated impact glass can push that to 8 weeks during the busy fall season. We’ll give you a written lead time before you sign anything, and we’ll coordinate the install date around the delivery, not the other way around. Call (954) 280-4413 if you’re working against a deadline like a renovation schedule or a closing date, and we’ll tell you honestly what’s possible right now.
The VLX 80 configured with Low-E glass can meet the NFRC U-factor and Solar Heat Gain Coefficient thresholds for the federal energy-efficient home improvement credit, but qualification depends on the exact glass package and the specific opening. We will provide the NFRC-rated performance data for your configuration so your tax professional can confirm eligibility. The credit applies to the window cost and labor for installing it. Call (954) 280-4413 and we’ll spec your windows with the ratings that qualify in most cases.
The VLX 80 carries a ViewLux manufacturer warranty on the frame, glass seal, and hardware, with terms that vary by component. The key detail is this: the warranty is only valid when the window is installed by an authorized partner like TruePane Windows & Doors. If a window is installed incorrectly, the manufacturer will deny a warranty claim for the resulting failure. Our Fort Lauderdale team also provides a workmanship warranty on the installation itself, which covers the labor associated with an install-related issue. Call (954) 280-4413 and we’ll walk you through exactly what’s covered on the VLX 80 before you commit.
Yes, within the structural limits of the VLX 80 frame system. Casement windows can span wide openings, but there are maximum sash sizes based on wind-load calculations for Fort Lauderdale’s hurricane zone. A window that’s too wide for its rated load will eventually sag, leak, or fail under storm pressure. Our team calculates the maximum allowable size for each opening based on Florida Building Code requirements, not on what looks good in a rendering. Call (954) 280-4413 with your rough opening measurements and we’ll tell you what’s feasible and what the upcharge is for a custom size.
Fort Lauderdale’s salt air is hard on everything, including coated aluminum. For the VLX 80, maintenance is simple but should be consistent: rinse the frames with fresh water every few months to remove salt residue, especially if you’re east of Federal Highway within a mile of the ocean. Wipe the tracks and hinges with a dry cloth, and lubricate the crank mechanism annually with a dry silicone spray, never grease. The powder-coated and anodized finishes are designed for coastal exposure, but they’ll last noticeably longer if salt isn’t left sitting on them. If you’re ever unsure about a frame issue, call (954) 280-4413, send us a photo, and we’ll tell you whether it needs attention.
Get a Quote - VLX 80 Casement Window in Fort Lauderdale
If you’re pricing the VLX 80 Casement Window for your Fort Lauderdale home or project, let’s get you real numbers. We’ll schedule a free on-site measurement, talk through the glass and finish combos that fit your elevation, and give you a written line-item quote with no change orders later. Call (954) 280-4413 to start.
Written by the team at TruePane Windows & Doors, authorized ViewLux installation partner serving Fort Lauderdale, FL.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.
Other TruePane Windows & Doors Services
What Neighbors Say About TruePane Windows & Doors
Detailed Images
