VLX 100 Pivot Door

VLX 100 Pivot Door in Fort Lauderdale, FL | TruePane Windows & Doors

The VLX 100 Pivot Door is a heavy-duty aluminum entry system that rotates on a vertical center axis instead of traditional side hinges. It creates a striking architectural statement with oversized glass panels and clean, minimal sightlines. As an authorized ViewLux installation partner, TruePane Windows & Doors brings this product to Fort Lauderdale homeowners and builders who want a true custom entry, not another stock door from a big-box catalog. We handle the measuring, the install, and the warranty paperwork, so you get a pivot door that actually works in the Florida climate. Call (954) 280-4413 to talk through sizing, finishes, and lead times.

Call (954) 280-4413

Product Overview - VLX 100 Pivot Door

The pivot door has become the signature of modern Fort Lauderdale architecture. You see them on waterfront properties along Las Olas, new builds in Victoria Park, and renovations in Coral Ridge where homeowners want the entry to feel like a design moment. The VLX 100 fits that brief perfectly. The door rotates on a vertical center axis, which means the pivot point sits inward from the edge. That changes everything about how the door moves and how it looks. You get a wider, taller panel that opens smoothly without the sag and drag that heavy traditional hinged doors develop over time.

Why do buyers choose this series over a standard aluminum door? The engineering. The profile width measures 2.56 inches, and the wall thickness comes in at 0.098 inches, which is meaningfully heavier than what you get on a typical residential door. That extra aluminum mass means the frame resists racking, twisting, and the kind of day-to-day flex that eventually leads to air leaks and misalignment. Add oversized glass inserts, and you have an entry that reads more like a glass wall than a door. It’s the product we recommend most often in Fort Lauderdale when the goal is a clean, contemporary elevation without sacrificing structural integrity.

TruePane Windows & Doors has installed pivot doors in enough South Florida homes to know what separates a good install from a great one. The VLX 100 is only as good as the rough opening it sits in. Our crews set every unit level, plumb, and square, because a pivot door that’s off by even a fraction of an inch will bind, scrape, or drift. We treat this as an installation project, not a drop-in replacement.

Technical Specifications

Here’s what the VLX 100 specs look like in plain terms. These numbers matter when you’re comparing pivot doors across manufacturers, or when your architect is drawing the elevation and needs exact clearances.

• Frame wall thickness: 0.098″ extruded aluminum - heavier gauge than standard residential door frames, built for daily use and coastal exposure.
• Profile width: 2.56″ - slim enough to keep sightlines clean, wide enough to hold oversized glass panels securely.
• Maximum panel span: up to 60 inches wide by 120 inches tall - that’s a true floor-to-ceiling statement in most Fort Lauderdale entryways.
• Glass options: clear, frosted, obscure, Low-E, tempered, and laminated - single or insulated configurations depending on elevation and energy goals.
• Finish options: premium black, pure white, anodized silver, bronze, champagne, and teak wood.
• Pivot hardware: floor-mounted and top-mounted pivot assemblies rated for the full panel weight, with adjustability for field conditions.
• Weather seals: full-perimeter gasketing and brush seals at the threshold and jambs to keep water and air out.

Every VLX 100 we order for Fort Lauderdale projects is configured to the specific opening dimensions. These aren’t stock sizes sitting in a warehouse. That’s the point of a pivot door - it’s a made-to-measure product.

Performance Features

Thermal Efficiency

The VLX 100 uses thermal break technology that separates the interior and exterior aluminum surfaces. That break cuts heat transfer through the frame, which is what your energy bill feels every month in Fort Lauderdale. Units can be configured with Low-E glass for NFRC-rated performance numbers that meet Florida’s energy code requirements.

Acoustic Performance

Aluminum frames paired with laminated or insulated glass do real work cutting street noise. If your home fronts a busy corridor like Sunrise Boulevard or sits under a flight path near the executive airport, the VLX 100 can be built to noticeably reduce the sound that reaches your foyer. Laminated glass is the biggest lever here.

Airtightness & Weather Seal

South Florida’s humidity doesn’t just make things uncomfortable - it drives air infiltration through any gap it can find. The VLX 100’s full-perimeter gasketing and compression seals hold the panel tight against the frame. When TruePane installs the unit, we use AAMA 812 low-expansion foam sealant around every joint, which eliminates the micro-gaps that cause drafts and condensation.

Waterproofing

Fort Lauderdale gets roughly 60 inches of rain a year, often in short, violent downpours. The VLX 100’s threshold design channels water away from the interior, and the perimeter seals prevent capillary action from pulling moisture inside. The foam sealant applied per AAMA 812 keeps water from working its way behind the frame and into the wall cavity - the most common failure point on cheap pivot door installs.

Wind Resistance

This is hurricane territory. The VLX 100 can be ordered with impact-resistant laminated glass, which is the same category of glazing used in code-compliant hurricane protection across Broward County. The heavy-gauge aluminum frame and full-perimeter anchoring give the assembly a wind-load rating appropriate for local climate requirements. When we set the frame, it’s anchored into the rough opening so the load transfers to the structure, not just the trim.

Security & Hardware

The pivot assembly carries the full weight of the panel, so the hardware is substantial - not a residential hinge set. That translates to a door that’s difficult to force or lift. The lock points and handle sets are spec’d to match the door’s weight and size, and we can coordinate access-control hardware for homes that already have smart entry systems.

Color & Glass Options

The VLX 100 offers six finishes, and the right choice depends on your home’s architecture and where the door sits relative to the sun.

Premium black is the heavyweight in modern Fort Lauderdale designs. It reads sharp against white stucco and creates the strongest contrast on a contemporary elevation. Pure white disappears into lighter facades - good for a traditional home in Rio Vista where the door shouldn’t scream. Anodized silver gives you that raw, metallic look without the maintenance worry of bare metal. Bronze lands between black and silver - a warmer dark tone that works on mid-century homes and anything with wood accents. Champagne is the unexpected choice, a soft gold tone that holds up better than you’d think on coastal properties. Teak wood brings wood-grain texture into an aluminum system, which solves the problem of wanting a wood-look entry without the rot, warp, and termite exposure real wood faces in South Florida.

Glass selection drives both privacy and performance. Clear maximizes light and view. Frosted or obscure gives you privacy while keeping the door bright. Low-E cuts heat gain and protects interior finishes from UV. Tempered is safety glass - required in most door applications and building code around Fort Lauderdale. Laminated is the impact-rated option, and if you’re in a flood or wind zone, it’s the one we’d spec first.

Installation by TruePane Windows & Doors in Fort Lauderdale

We’re going to be direct here. A pivot door is not a DIY project, and it’s not a job for a crew that only hangs standard pre-hung units. Every TruePane installation of the VLX 100 follows a documented process, and that process is the difference between a door that opens perfectly for 15 years and one that starts sticking in the first humid summer.

Step one is the pre-install inspection. We measure the rough opening in three places - top, middle, and bottom - and check the floor for level. Pivot doors need a flat floor because the pivot point sits in the center of the opening, and an unlevel floor means a door that swings open or closed on its own. If we find issues, we flag them before the panel is ordered, not after it’s on site.

During the install, the frame is set level, plumb, and square. We shim and anchor the frame into the structural opening - not the casing. The panel is then hung on the pivot hardware, and we adjust the top and bottom pivots until the reveal gaps are even around all four sides. Every perimeter joint gets AAMA 812 low-expansion foam sealant, which seals against air and water without exerting pressure on the frame. The entire installation complies with AAMA 2400 and 2410 standards for window and door installation.

After the panel is set, we run a water test on the threshold and sill, check the weather stripping for compression, and cycle the door repeatedly to confirm it doesn’t bind. Cleanup is included - we remove the old door, the fasteners, the packaging, everything.

One more thing about authorized installation. ViewLux warranty coverage assumes correct installation. A door that’s installed out of level, or missing the perimeter seal, won’t perform, and the manufacturer won’t cover damage that stems from an improper install. Working with an authorized partner protects the warranty. Working with TruePane here in Fort Lauderdale means you have a local company accountable for the install, not a contractor who’s gone in six months.

Frequently Asked Questions - VLX 100 Pivot Door

Get a Quote - VLX 100 Pivot Door in Fort Lauderdale

If you’re planning a new build, a renovation, or a single-door replacement in Fort Lauderdale, start with a conversation. We’ll review your elevation, your glass needs, and your timeline, then quote the VLX 100 configured for your home. Site measurements are free. Call TruePane Windows & Doors at (954) 280-4413 to schedule yours.

Written by the team at TruePane Windows & Doors, installing premium door systems in Fort Lauderdale, FL.