Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Custom Windows & Doors Across Eatonville
Custom window and door work in Eatonville usually means opening up a wall that hasn’t been touched since the Eisenhower administration, and what’s behind the trim is rarely what the homeowner expects. We’ve been doing this long enough to know that a 1950s wood-frame home off Gabriel Street, West Street, or Eaton Street will fight back when you pull its original jalousie windows out. Rotted sill plates, termite-eaten jambs, undersized headers that no longer meet Orange County’s 130 mph wind-load code. TruePane handles all of it, with inspection-first pricing that puts the real cost in writing before we touch a single stud. Call (954) 280-4413 for a free estimate from our Custom Windows & Doors team.
Key Takeaways for Eatonville Homeowners
- Opening an older Eatonville wall almost always costs more than the window quote alone – we write rot-repair allowances into every contract so the final bill isn’t a surprise.
- Original jalousie windows are non-impact-rated and effectively unsealable; full-frame replacement is standard here, not insert work.
- Orange County’s 130 mph design wind speed means replacement glazing must be impact-rated or protected – we’ll tell you exactly what’s required before you spend anything.
- Our Done Right Promise covers the workmanship, and we register both manufacturer warranty layers in writing before our truck leaves your driveway.
Why TruePane Windows & Doors Is Eatonville’s Preferred Custom Windows & Doors Company
We build for how Eatonville actually is, not how a blueprint says it should be. The housing stock here runs heavily to 1940s through 1970s wood-frame homes, many still carrying their original single-pane jalousie or casement windows and hollow-core exterior doors. That means every job we scope in Eatonville starts with the assumption that we’ll find rot, insect damage, or out-of-square framing once the old unit comes out. Dale Kessler founded this company because out-of-true installs and voided warranties were problems worth fixing permanently, and that rule governs how we work in this town.
Our technicians are background-checked and uniformed, and they measure every opening twice. We quote manufacturer lines side by side on paper so you see exactly what you’re buying – Andersen, Pella, Marvin, PGT, CGI, and others – and we register both warranty layers before we leave the driveway. That’s The Keystone Standard, and it’s the same standard whether we’re setting a custom arched window on a 1920s bungalow near Kennedy Boulevard or replacing a rotted storefront frame in the commercial district off Maitland Avenue.
We answer the phone with a live person 24 hours a day, seven days a week. No voicemail tree, no callback form, no regional call center. When you call about window rot behind a jalousie frame or a front door that swells shut in July, you talk to someone who knows what you’re describing.
Our Custom Windows & Doors Services in Eatonville
Architectural Grilles & SDLs
Plenty of Eatonville homes were built with divided-light windows, and when those units are replaced with flat modern glass, the house loses something. We reproduce the look with simulated divided lites, or SDLs, in patterns that match the original fenestration. For homeowners in the older grid of streets north of Kennedy Boulevard, where many homes still have their original window proportions, matching the grille profile and bar width is the difference between a replacement that disappears into the house and one that announces itself from the street.
Impact-Rated Glazing
Eatonville sits in Orange County’s 130 mph design-wind-speed zone, and the Florida Building Code doesn’t make exceptions for older homes that predate modern impact standards. When you replace a window or door here, the new unit has to meet current wind-load requirements. We install impact-rated glazing from PGT, CGI, and ES Windows, and we’ll walk you through the difference between laminated impact glass, insulating laminated units, and the wind-debris ratings each one carries. This isn’t an upsell. It’s code.
Custom Shape Windows
Some of Eatonville’s older homes have arched, round, oval, or half-round window openings that off-the-shelf rectangular units can’t fill. We cut and set custom shapes to the rough opening, not the other way around. That matters on projects around Lake Bell and the residential streets near Danzler Park, where we’ve seen arched transoms, angled greenhouse windows, and odd trapezoid openings that would defeat a standard retrofit. We measure twice, template the opening, and send the exact shape to the manufacturer. No site-bent trim, no gap-filled frankenwindow.
Commercial Storefront Glazing
Eatonville has a working commercial core along Maitland Avenue and the roads around Hungerford Elementary, and storefront aluminum and glass takes a beating in Florida heat and hurricane wind. We replace fogged or cracked storefront glass, re-glaze aging frames, and upgrade non-impact commercial openings to current code. For a town with this much small-business storefront stock, a failed seal or a pitted frame isn’t cosmetic. It’s water intrusion, it’s energy loss, and it’s a liability during storm season.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Eatonville
We’re an authorized installer for more than a dozen manufacturer lines, and in Eatonville we do most of our residential impact work with PGT, CGI, and ES Windows. Each line has a different wind-debris rating, a different warranty structure, and a different price point, so we quote them side by side and let you see the comparison on paper. We also keep common replacement hardware and seal systems on our trucks for faster turnarounds on service calls. If your window or door brand is one we install, the parts are likely already in our inventory.
Common Custom Windows & Doors Problems We See in Eatonville Homes
- Jalousie window removal exposes crumbling framing behind the frame. The jalousie design and its metal subframe hid decades of water intrusion. Once removed, the surrounding wood is often too soft to hold a new unit, so the opening needs a full rebuild before the window goes in.
- Original hollow-core exterior doors swollen and rotted at the bottom. Eatonville’s humidity and afternoon thunderstorms drive moisture into door bottoms that were never sealed properly. The jamb goes out of square, and any new pre-hung unit binds unless the opening is corrected first.
- Improper flashing on decades-old flanged windows. Wind-driven rain gets behind the siding, rots the structural header, and the homeowner never sees it until the window is removed. By then, the repair is framing work, not window work.
- Single-pane glass with failed or no low-E coating. Homes built before the 1980s in Eatonville rarely have insulated glass or any meaningful solar control. Summer cooling bills reflect it, and the glass surface runs hot enough to radiate heat into the room.
Pricing for Custom Windows & Doors in Eatonville, FL
In Eatonville, a full-frame custom window replacement on a wood-frame home typically runs $900 to $2,200 per opening, depending on size, shape, glass package, and whether we’re rebuilding the rough opening. A standard impact-rated double-hung in a straight opening starts around $1,100 to $1,600 installed. Custom shapes – arches, rounds, trapezoids – add 30% to 50% over the comparable rectangular unit. If we find rot or termite damage, sistering jack studs or replacing a sill plate adds $150 to $650 per opening, and we price that as a written allowance before we start, not as a change order after the wall is open. Custom door replacements run $2,800 to $6,500 depending on glass, impact rating, and hardware. Call (954) 280-4413 for a line-item quote on your exact openings. Estimates are free.
We Also Serve Cities Near Eatonville
Our crews work across Central Florida, and we regularly schedule custom window and door jobs in Custom Windows & Doors in Eatonville and neighboring communities including Acacia Villas, Alafaya, Altamonte Springs, and Altoona. If your home is in one of those areas and you’re dealing with the same older wood-frame issues we see daily here, call us for the same inspection-first pricing and the same Done Right Promise.
Serving Eatonville, FL - Our Local Coverage Area
We’re based in the Eatonville area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Custom Windows & Doors in Eatonville
Because jalousie windows were set into wood frames that have been soaking up Florida humidity and wind-driven rain for fifty to seventy years, and the metal jalousie subframe hid the rot instead of preventing it. Once the frame is removed, you can see the true condition of the sill plate and jack studs, and on most pre-1960 Eatonville homes that wood is too far gone to hold a new unit. We handle this by writing a rot-repair allowance into every contract, so the additional framing work is approved and priced before we open the wall. Call (954) 280-4413 and we’ll walk you through what your specific window style likely means for the job scope.
Almost always a full-frame replacement, because the old casement frame is typically not square, not flashed to current code, and not deep enough to accept a modern insulated impact unit. An insert leaves the old frame, the old flashing, and the old air-sealing problems in place, and you’re paying new-window money to sit old problems inside new glass. On a 1940s wood-frame house in Eatonville, the frame is usually part of what’s failing. Call (954) 280-4413 for an honest assessment of your specific openings, free.
We price it before we ever touch the window. On a 1950s wood-frame home off Gabriel Street, we pulled a rotted casement sash and found the jamb eaten through by termites and the sill plate so soft our tech’s screwdriver sank to the handle. Because the homeowner had already approved our written inspection-first allowance, we sistered in new jack studs, flashed the opening with butyl tape, and set a fusion-welded impact-rated double-hung from Simonton the same week. No open wall, no surprise bill, no argument. That’s how every Eatonville job is scoped.
Eatonville is in Orange County’s 130 mph design-wind-speed zone, which means replacement windows and doors must be either impact-resistant glazing or non-impact units protected by an approved impact cover. In practice, most homeowners choose laminated impact glass from PGT, CGI, or ES Windows because it’s always in place, never requires you to be home to deploy shutters, and drops your insurance premium in many cases. We’ll show you the exact wind-debris rating for each product we quote. Call (954) 280-4413 for a free estimate with the code requirements stated in writing.
A properly built custom exterior door will fix it, as long as the jamb and rough opening are corrected at the same time. The original hollow-core door failed because it was never sealed at the bottom, and decades of Eatonville humidity soaked the core until the bottom swelled and the jamb went out of square. We replace the door, rebuild or shim the jamb, seal the bottom rail and threshold, and flash the opening so water can’t get back in. Then we register the warranty in writing before we leave. Call (954) 280-4413 to have someone look at your door opening and tell you exactly what it needs.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Eatonville and Central Florida with window and door craftsmanship rooted in years of trade experience.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.