Custom Windows & Doors in Fort Lauderdale - Free In-Home Measure, Written Price

Fast, Reliable Custom Windows & Doors Across Fort Lauderdale

Custom windows and doors in Fort Lauderdale are not a luxury upgrade. They are a structural requirement, shaped by the Miami-Dade Notice of Acceptance rule, salt-driven corrosion, and post-Surfside inspection law. Most homes we open up in Coral Ridge, Victoria Park, or Rio Vista still carry original single-pane aluminum sliders or jalousies that cannot legally be reinstalled once removed. TruePane Windows & Doors handles the full replacement: NOA-compliant product selection, Broward County permits, and installation crewed by background-checked, uniformed technicians. Call (954) 280-4413 to schedule a free estimate. We serve all of Fort Lauderdale, and a live person answers the phone 24 hours a day, 7 days a week.

Call (954) 280-4413

What makes our Custom Windows & Doors team different comes down to one rule Dale Kessler keeps on the whiteboard: if the pane is not true, the job is not done. That governs every cut, every shim, every seal. In Fort Lauderdale, where a window has to hold back 170-mph wind-borne debris and keep salt moisture out of the wall cavity, out-of-true is not a cosmetic issue. It is a code failure waiting for the next inspection.

Why TruePane Windows & Doors Is Fort Lauderdale’s Preferred Custom Windows & Doors Company

Fort Lauderdale homeowners call us because we write the contract the way a glazier should: with allowances for what is likely behind the wall, and a change order process that gets every surprise priced and approved in writing before we touch it. No surprise line items on the bill. No second appointment left hanging.

We carry both manufacturer warranty layers registered in writing, with durations stated, before the truck leaves the driveway. That is The Keystone Standard, and it is not a slogan. It is a document. We back every job with the Done Right Promise: if it is not done right, we make it right. No paperwork fights, no arguing.

Local reputation matters in Fort Lauderdale. Crews here see the same failure patterns week after week: corroded slider tracks in Tarpon River, fogged insulated glass units along Las Olas Isles, rotted lintels behind 1960s stucco in Victoria Park. That repetition is why we can quote accurately and install efficiently. We measure every opening twice, quote manufacturer lines side by side on paper, and register both warranty layers before we leave. Serving the Fort Lauderdale area is not a satellite assignment for us; our crews work these neighborhoods every week, and our dispatch is coordinated from our South FL office so scheduling follows local traffic, local permitting, and local inspection cycles.

We are an authorized installer for more than a dozen manufacturer lines, including, PGT, and CGI. When you call (954) 280-4413, you get a live person. Not a voicemail tree. Not a regional call center. That matters when a board vote is coming on a bulk condo contract along A1A, or when a homeowner needs a straight answer about whether their existing frames are worth saving.

Our Custom Windows & Doors Services in Fort Lauderdale

Custom work in Fort Lauderdale is a different trade than replacement-only work. These are not off-the-rack openings. The homes are older, the openings are irregular, and the products must clear a higher bar than almost anywhere in the country. Here is what we handle most.

Custom Shape Windows

Fort Lauderdale’s 1950s and 1960s CBS ranches, especially in Coral Ridge and Victoria Park, often feature arched, radius, octagonal, or trapezoidal window openings that were original to the home. Big-box replacement lines do not fabricate to these shapes. We do. In Fort Lauderdale, every custom shape must still carry a Miami-Dade NOA, which means the product gets engineered and tested to the shape you have, not pulled from a stock size. We commonly fabricate radius-top casements and half-rounds with laminated impact glass to match both the architectural character and the HVHZ code.

Architectural Grilles & SDLs

For homeowners trying to preserve the look of a 1962 Victoria Park ranch or a Coral Ridge mid-century, simulated divided lites (SDLs) with architectural grilles are the standard move. But the grille profile, bar width, and finish have to be specified correctly or the window looks like a retrofit. We quote SDL configurations side by side against flat glass so you see the unit price difference before you commit. On that Victoria Park ranch where our crew pulled original jalousies and found the lintel rotted out behind the stucco, the fix was a new galvanized lintel and flashing tape, followed by custom architectural-grille casements with low-E argon fill, all NOA-rated and all installed before the inspector came back. Salt air had eaten the steel all the way through. The homeowner got the change order in writing, approved it, and we did not stop work for an argument.

Commercial Storefront Glazing

Storefronts along Las Olas Boulevard, Flagler Village, and the commercial strips near US-1 carry their own code burden. Impact-rated storefront glazing in Fort Lauderdale must survive both wind-borne debris and the constant humidity that corrodes cheaper aluminum framing. We install curtain wall and storefront systems rated for the HVHZ, with finishes specified for salt exposure. For retail owners, the choice of finish is not cosmetic; it determines whether the frame pits in year seven or holds for twenty.

Curtain Wall Systems

Bulk condo and commercial work has grown sharply in Fort Lauderdale since SB 4-D Milestone Inspections began forcing recertification on aging beachfront towers. Original 1960s and 1970s sliding balcony doors are routinely flagged as deficiencies. We bid curtain wall replacements for condo associations along the A1A corridor, with the paperwork a board actually needs: NOA documentation, permit drawings, and both warranty layers registered in writing. Boards are not shopping for the cheapest bid; they are shopping for a contractor who will still answer the phone in thirty years. So are we.

Oversized Glass Panels

Homes on the water in Las Olas Isles, Rio Vista, and the Landings often call for oversized fixed panels and lift-and-slide doors with glass that runs floor to ceiling. These panels carry enormous wind load and salt exposure. The glass package, the interlayer, and the frame engineering all have to be specified for the specific exposure. A standard impact rating is not enough inside the HVHZ. We specify per opening, with the NOA documentation that Broward County inspectors ask for by name.

Trusted Brands We Service in Fort Lauderdale

We install and service more than a dozen manufacturer lines, and for Fort Lauderdale work we regularly quote PGT, CGI, and CWS because their NOA documentation is the most straightforward for Broward County permits. We stock common replacement hardware and weather seals for local inventory, which cuts turnaround on service calls. If you have an existing Andersen or Pella product that is failing under salt exposure, we will tell you whether it can be serviced or whether replacement is the honest answer. We quote manufacturer lines side by side on paper so you can see what you are buying. No veiled brand loyalty, no pushing a house line.

Common Custom Windows & Doors Problems We See in Fort Lauderdale Homes

• Original aluminum slider tracks corroded by salt-laden humidity. Homes built between the 1950s and 1980s in Fort Lauderdale almost universally carry aluminum sliders with exposed tracks. Decades of salt air pit the track surface until the sash binds, locks fail, or the panel cannot be lifted out for cleaning. We replace these with marine-grade stainless hardware and sealed track systems rated for the HVHZ.
• Fogged insulated glass units near the Intracoastal. Salt moisture accelerates seal delamination on dual-pane IGUs. Fog between the panes is not just cosmetic; it means the argon insulation is gone and the glass unit is no longer performing. Homes within a mile of the Intracoastal Waterway, especially in Las Olas Isles and Rio Vista, see this at twice the rate of inland neighborhoods.
• Rotted or undersized lintels behind original stucco. On older CBS construction, steel lintels above window and door openings corrode invisibly behind the stucco. The first sign is usually a hairline crack at the corner of the opening. When we open the wall, the lintel is often partially gone. This is a code-mandated structural repair under Broward County permits, and it is exactly the kind of condition we write allowances for ahead of time.
• Outdated wiring or undersized framing discovered only after walls are opened. Once an opening is enlarged for a custom door or a window, the inspector may require electrical upgrades or framing reinforcement triggered by current code. If the home still carries original wiring at the opening, it becomes visible and becomes the inspector’s business. We plan for this in the contract. Surprises get priced and approved in writing before we proceed.

Pricing for Custom Windows & Doors in Fort Lauderdale, FL

We Also Serve Cities Near Fort Lauderdale

Our crews serve Fort Lauderdale neighborhoods daily, and we run the same fully documented process in Plantation, Pompano Beach, Hollywood, and Coconut Creek. If your home is within a half hour of Fort Lauderdale, you get the same NOA-compliant product selection, the same Keystone Standard warranty registration, and the same live person on the phone. Call (954) 280-4413 to confirm we cover your street.

FAQs - Custom Windows & Doors in Fort Lauderdale