Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Custom Windows & Doors Across Hunters Creek
Custom window and door work in Hunters Creek means more than swapping glass. It means architectural review through the Hunters Creek Community Association before Orange County will even look at a permit. It means staging on narrow residential streets without blocking a neighbor’s driveway. It means knowing which 1990s aluminum sliders are rotted behind the stucco before you quote a retrofit. Our crews handle all of it. From Osprey Lakes Circle to the townhomes off Town Center Boulevard, we measure twice, pull the right permits, and leave the job site clean. Call (954) 280-4413 for a free estimate.
Why TruePane Windows & Doors Is Hunters Creek’s Preferred Custom Windows & Doors Company
Hunters Creek is a tight-knit master-planned community, and word travels fast when a contractor leaves a mess or a fogged unit behind. We have spent years earning our standing here one job at a time, and the reputation is built on showing up when we say, keeping the work area clean, and standing behind the install in writing. Dale Kessler founded TruePane in 2008 on a rule that still governs every job: if the pane is not true, the job is not done.
Our Hunters Creek customers consistently point to three things. First, we know the HOA review process cold, which keeps projects from stalling before they start. Second, our pricing is upfront and itemized, so the bill matches the quote. Third, a live person answers the phone 24 hours a day, seven days a week. Not a voicemail tree. Not a call center. When a sliding door binds in August, you reach a person who knows Hunters Creek.
We also do not rush the paperwork. The Keystone Standard means both manufacturer warranty layers get registered in writing before our truck leaves your driveway, and every job carries a Done Right Promise. If something is not right, we make it right. No arguing.
Our Custom Windows & Doors Services in Hunters Creek
Impact-Rated Glazing
Homes throughout Hunters Creek were built between 1988 and 2000, which means most original openings predate Florida’s post-Hurricane Andrew wind-load requirements. We replace those aging aluminum frames with impact-rated units from manufacturers like PGT, CGI, and Andersen, engineered for Orange County code and the storm tracks that reach this far inland. On shared-wall townhomes, we coordinate the structural review carefully so your upgrade does not create issues for the unit next door.
Custom Shape Windows
Arched transoms, radius tops, angled bays. Hunters Creek’s production-built homes were not designed for off-the-shelf replacement glass, and trying to force a standard unit into a non-standard opening is how you end up with voids and seal failure. We template every opening, order through our authorized manufacturer lines, and set the unit true. Whether it is a half-round over a front entry or a trapezoid beside a volume ceiling, we have done it on streets across Hunters Creek.
Architectural Grilles & SDLs
Simulated divided lites give a home the look of true muntins without the thermal loss, and Hunters Creek homeowners often pair them with impact glass for storm protection and curb appeal. We quote grille patterns side by side on paper so you see exactly what you are buying before a single pane is ordered. For homes with HOA design standards, we help you match the community’s approved exterior appearance.
Commercial Storefront Glazing
Hunters Creek has a growing commercial corridor along Orange Blossom Trail and Town Center Boulevard. We install and replace storefront glass, entrance systems, and curtain wall components for local businesses, always working around business hours to limit disruption. Permitting for commercial glazing in Orange County has its own set of inspections, and we manage that process end to end.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Hunters Creek
We are an authorized installer for more than a dozen manufacturer lines, and on custom work in Hunters Creek we lean on ES Windows, ECO Window Systems for their consistency in custom sizing and impact performance. We do not push one brand for every job. We quote at least two manufacturer lines side by side on paper, so you can compare glass packages, frame materials, and warranty durations in writing. Our warehouse keeps common weather-stripping, rollers, and hardware in stock for Hunters Creek jobs, which cuts turnaround time when a repair is needed. A senior or veteran discount of 5% is permanent, and we do not hide it in the fine print.
Common Custom Windows & Doors Problems We See in Hunters Creek Homes
- Failed sliding glass doors from the 1990s tract builds. The original aluminum sliders were installed with minimal weather-stripping, and after 30 years of Central Florida humidity, the wooden subframes behind the stucco have swollen. Doors bind, leak into the wall cavity, and often fail current Orange County wind-load code.
- Fogged insulated glass in original single-pane aluminum frames. Once the seal fails, the unit is done. You cannot clean the fog. On Hunters Creek homes, this is usually a full-frame replacement because the original aluminum does not meet modern code.
- Warped early-generation vinyl frames. Inland sun and daily summer humidity work on cheap vinyl until sashes no longer close square. Oversized custom panels are especially risky in warped openings without a proper structural review.
- HOA-driven compliance gaps. Hunters Creek Community Association requires architectural review before Orange County issues a permit. Miss that step and your project stalls, or worse, you install something the HOA flags after the fact.
Pricing for Custom Windows & Doors in Hunters Creek, FL
A custom shape window in Hunters Creek typically runs $900 to $2,400 per opening, depending on glass package, frame material, and whether the opening needs structural correction. Full-frame replacement of a 1990s aluminum sliding glass door with an impact-rated unit generally falls between $3,200 and $6,800. Architectural grilles and SDLs add $175 to $400 per sash, on top of the window cost. Curtain wall and commercial storefront work is quoted per project after site measurement, but smaller storefront glass replacements in the Hunters Creek commercial corridor usually start around $1,500. The variables that move your number: opening condition, HOA-required finishes, and whether the existing frame is square. We give you a written, itemized quote before any work begins. Call (954) 280-4413 to schedule your free estimate.
How We Handle Hunters Creek’s Tight Lots and HOA Requirements
Hunters Creek was built as a master-planned community in a compressed window of time, and most lots are tight. Street parking is limited, driveways are short, and neighbors live close. We plan every job around that reality. Our crews stage materials on the driveway or immediately in front of the home, never across a neighbor’s access, and we remove debris daily rather than letting it stack. When a project touches a shared wall, we notify the adjoining unit in writing before the first tool comes off the truck.
Permitting here has an extra layer. The Hunters Creek Community Association requires architectural review before Orange County will issue a window or door permit. We handle that sequence for you. Our team prepares the submittal, documents the product specs, and coordinates the approval timeline so the permit does not stall the job. If your project involves work-hour restrictions, we schedule the noisy phase within the community’s allowed window and use hand tools where a power tool would carry further than it should.
We learned the value of that planning on a job off Osprey Lakes Circle. A bowing aluminum-frame slider on a tight lot had swollen the wooden subframe behind the stucco. We staged everything on the driveway, got the HOA architectural review squared before pulling the Orange County permit, and kept the stucco cutback to hand tools so the neighbor’s shared wall never felt a thing. The Milgard impact unit went in true, the inspection passed, and the site was spotless by dinner. That is how the work should go in Hunters Creek.
We Also Serve Cities Near Hunters Creek
From our dispatch office serving South Florida, our crews cover Hunters Creek and the surrounding Orange County communities, including Acacia Villas, Alafaya, Altamonte Springs, and Altoona. If you are in one of those areas, the same team that handles Custom Windows & Doors throughout the region can schedule your estimate. Learn more about our work Custom Windows & Doors in Hunters Creek or call (954) 280-4413 directly.
Serving Hunters Creek, FL - Our Local Coverage Area
We’re based in the Hunters Creek area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Custom Windows & Doors in Hunters Creek
Yes. Hunters Creek Community Association requires architectural review before Orange County will issue a permit for window or door replacement. We prepare the submittal, include the manufacturer specs, and track the approval so your project does not stall. Call (954) 280-4413 and we will walk you through the exact sequence for your street.
Our crews stage all materials on your driveway or directly in front of the home, never across a neighbor’s access or a shared sidewalk. On the tightest lots, we schedule material delivery in phases so there is never a pile of glass on the street. We also remove debris daily. It keeps the site clean and the neighbors off your back.
Orange County generally restricts noisy construction work to daytime hours, and Hunters Creek’s HOA may add its own quiet-hour expectations. We schedule the loudest demolition for mid-morning and switch to hand tools for stucco cutbacks or shared-wall work when the job is close to a neighbor’s bedroom. Most jobs in Hunters Creek are completed during standard weekday working hours.
Yes, but the structural review matters more on a shared-wall build. We verify the wall assembly, coordinate with the HOA on exterior appearance, and confirm the opening accepts the thicker impact frame without compromising the party wall. We have done it on townhomes across Hunters Creek, and the key is measuring correctly before ordering.
The original aluminum-frame sliders in Hunters Creek’s tract homes were installed with minimal weather-stripping, and 30 years of Florida humidity has swollen the wooden subframes behind the stucco. The doors bind, leak, and often fail current Orange County wind-load code. It is a multi-trade repair we flag during estimates, and the fix is usually a full-frame impact replacement. Call (954) 280-4413 for an exact quote on your door.
Get Your Custom Windows & Doors Estimate in Hunters Creek
Whether you are replacing a fogged 1993 slider, upgrading to impact-rated glass, or finally building that custom arch window, the process starts with a free estimate and a straight answer. We will measure every opening twice, quote manufacturer lines side by side on paper, and explain exactly how the HOA review and Orange County permit will work for your property. No guesswork. No surprise line items. Call (954) 280-4413 today to schedule your free estimate.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Hunters Creek and Orange County. If the pane is not true, the job is not done.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.