Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Custom Windows & Doors Across Jensen Beach
Custom window and door work in Jensen Beach runs $1,800 to $11,000 per opening depending on size, material, and whether you need full-frame tear-out replacement. Most coastal homes here need full-frame work because the original 1960s-1980s aluminum frames have corroded past the point where an insert would hold. Our crews work Jensen Beach weekly and know the difference between a barrier-island house and one set back near Savannas Preserve State Park. Call (954) 280-4413 for a free estimate and a straight answer on what your house actually needs.
Salt air near Jensen Beach decides the materials before it ever decides the schedule. Homes here sit between the Indian River Lagoon and the Atlantic, so every window and door takes salt spray from two directions at once. Standard aluminum extrusions pit and oxidize. Zinc-coated fasteners seize. Foam weatherstripping crumbles in under two years. We specify stainless hardware, fusion-welded frames, and marine-grade finishes because anything less fails early, and a cheap spec costs more within a decade.
Why TruePane Windows & Doors Is Jensen Beach’s Preferred Custom Windows & Doors Company
TruePane has built its name on Custom Windows & Doors done to a standard that holds up in salt air. Dale Kessler founded this company in 2008 as a second-generation glazier who was tired of seeing out-of-true installs and voided warranties. The rule on the whiteboard has not changed since: if the pane is not true, the job is not done. We bring that standard to every Jensen Beach opening we set.
Jensen Beach homeowners have been asking us for years about pitted frames, fogged seals, and doors that bind in July. We know the difference between a 1970s concrete-block ranch off NE Ocean Boulevard and a newer stilt home near the lagoon. That local knowledge shapes the product lines we quote and the way we schedule tear-outs around Martin County’s building permit cycle. Our technicians are background-checked, uniformed, and measure every opening twice before a quote lands in your hand.
When you call TruePane, a live person answers. Not a voicemail tree, not a callback form. That matters to the homeowner who has a non-renewal notice from Citizens Insurance sitting on the kitchen counter and needs to know what impact-rated products will satisfy their carrier. We answer the phone twenty-four hours a day, seven days a week, and we will tell you the truth about your windows.
Our Custom Windows & Doors Services in Jensen Beach
Custom Shape Windows
Round-tops, arch-tops, trapezoids, and radius corners show up all over Jensen Beach’s older coastal cottages and newer custom builds. The problem is that most off-the-shelf shapes are glazed with standard hardware that cannot survive dual-salt exposure. We order custom shapes with stainless hinges, stainless balances, and fusion-welded vinyl or heavy-gauge aluminum frames specified for marine environments. A radius window over a front door off Skyline Drive takes the same full-blast salt air as the oceanfront, and we treat it that way.
Commercial Storefront Glazing
Jensen Beach’s commercial strip along Jensen Beach Boulevard has storefronts that face the lagoon and the ocean at once, depending on the block. We see aluminum storefront extrusions pitting within five to eight years and zinc-plated door hardware rusting in place. TruePane replaces storefront systems with marine-grade aluminum and stainless hardware, and we work around business hours so a shop does not lose a Saturday. Storefront glazing near the Treasure Coast Square corridor takes a beating, and we spec it like we would a boat hull.
Curtain Wall Systems
Larger commercial and multi-story projects in Jensen Beach occasionally call for curtain wall replacement, usually after years of salt-driven seal failure. Curtain wall work is structural by nature, and Martin County’s Wind-Borne Debris Region status means every lite has to meet impact standards. We coordinate with local building officials, pull permits, and pass inspections the first time. This is not work to hand to a crew that does not understand barrier-island conditions.
Architectural Grilles & SDLs
Simulated divided lites and architectural grilles give a coastal home character, but they also trap salt and moisture if the finish is not sealed properly. We see grilles on lagoon-facing homes on the west side of the island corrode faster than the window itself. TruePane installs SDL bars with factory-applied marine finishes and specifies stainless connectors so the decorative layer does not become a maintenance problem. For the homeowner who wants the look of a divided window without the rust, that spec matters.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Jensen Beach
We are an authorized installer for more than a dozen lines, and for Jensen Beach work we lean on product families that hold up in salt air: ES Windows, ECO Window Systems. ViewLux impact-rated casements with fusion-welded frames and stainless hardware have become a recurring answer for barrier-island tear-outs because they end the corrosion cycle rather than slowing it. We stock commonly needed hardware and parts for these lines at our South Florida metro office, which means a Jensen Beach repair call does not wait on a freight truck when a sash needs a new balance. When we quote, we put manufacturer lines side by side on paper so you see exactly what you are buying and why one product costs more than another. Both manufacturer warranty layers get registered in writing before our truck leaves your driveway.
Common Custom Windows & Doors Problems We See in Jensen Beach Homes
- Pitting and exfoliation corrosion on aluminum frames. Cross-island salt spray from the lagoon and the Atlantic oxidizes standard aluminum within five to eight years, often starting along the jambs and bottom rails where water sits. Once the extrusion pits, the corner seals fail and the sash loses structural integrity.
- Foam weatherstripping degrading in under two years. Constant marine humidity and salt break down factory weatherstrip, leaving gaps that drive up the U-factor and let wind-driven rain through. What lasts a decade inland in Stuart rots out on Jensen Beach in a fraction of that time.
- Seized hardware and rusting fasteners. Standard zinc-coated steel screws, hinges, and roller assemblies cannot handle a lagoon-plus-ocean salt mix. We routinely find stainless that has seized, and zinc-plated parts that have rusted solid, especially in older single-track sliders and commercial storefronts.
- Jalousie windows that predate Florida impact code. Many 1960s and 1970s Jensen Beach homes still carry original jalousie windows, which do not come close to meeting current Wind-Borne Debris Region requirements. They leak, they corrode, and they are a liability at insurance renewal.
Pricing for Custom Windows & Doors in Jensen Beach, FL
A custom aluminum window with marine-grade hardware in a standard opening runs $1,800 to $4,200 installed. Custom shape windows, like arches and radius-tops, land between $3,000 and $6,500 per opening because of the tooling and lead time. Oversized glass panels for a living room wall or patio run $4,500 to $11,000 depending on size and impact rating. Full-frame tear-out replacement on a 1970s ranch adds 20 to 35 percent over an insert because we remove the old frame down to the rough opening, correct the opening if it is out of square, and re-flash the entire perimeter for salt and water protection.
Commercial storefront glazing in Jensen Beach runs $60 to $180 per square foot installed, and curtain wall work starts around $120 per square foot and climbs with height, access, and impact requirements. Architectural grilles and SDLs add $35 to $90 per lite depending on the profile and finish spec. We give line-item written quotes, not verbal ballparks, and we stand by the price. No surprise line items on the bill, no second appointment left hanging. Call (954) 280-4413 for a free estimate.
We Also Serve Cities Near Jensen Beach
TruePane serves Jensen Beach and the surrounding Treasure Coast communities: Stuart, Palm City, Port Salerno, and Hobe Sound. If you are just up the road in Stuart or across the lagoon in Palm City, the same crews and the same Keystone Standard apply. Read our city page for Custom Windows & Doors in Jensen Beach and call (954) 280-4413 to book a free estimate wherever you are on the Treasure Coast.
Serving Jensen Beach, FL - Our Local Coverage Area
We’re based in the Jensen Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Custom Windows & Doors in Jensen Beach
Because Jensen Beach is the only Treasure Coast city flanked by the Atlantic Ocean on one side and the Indian River Lagoon on the other, your windows take salt spray from two directions at once. That dual-saltwater exposure pits standard aluminum extrusions within five to eight years, even on houses a few blocks from the beach. The fix is not to keep scrubbing the frames. It is to replace them with marine-grade aluminum or fusion-welded vinyl built for this environment. Call (954) 280-4413 and we will tell you what your frames are worth saving.
No, you cannot do a like-for-like jalousie swap. Martin County sits within Florida’s Wind-Borne Debris Region, which means any replacement window or door must meet impact-rated or protected-opening standards. A simple like-for-like jalousie replacement is legally impossible and would fail a building inspection. We quote impact-rated options that fit the original openings, which usually means full-frame tear-out work. Call (954) 280-4413 for a free estimate and we will show you the compliant options.
It means your windows are attacked by salt spray from the Indian River Lagoon to the west and the Atlantic Ocean to the east, while a Stuart home typically only faces one direction of exposure. The cross-island salt mix corrodes standard aluminum frames and zinc fasteners roughly twice as fast as on the mainland. That is why we specify stainless hardware and marine-grade finishes on Jensen Beach work, and why the coastal spec costs more than the inland spec. The inland spec on a barrier island house will fail within a decade and cost you more in the long run.
Citizens Insurance and many private coastal carriers serving Jensen Beach now require documented impact-rated openings at policy renewal. Homeowners regularly come to us not because they chose to replace their windows, but because their insurer sent a non-renewal notice demanding proof of impact-rated openings. That means product selection is tied directly to your insurance standing from the first conversation. We register both manufacturer warranty layers in writing and provide the documentation your carrier wants. Call (954) 280-4413 to sort out what your policy actually requires.
Full-frame tear-out replacement runs 20 to 35 percent more than an insert, typically adding $700 to $1,500 per opening on a standard-sized window. It is usually necessary in Jensen Beach because most homes here date from the 1960s through 1980s and still carry original single-track aluminum sliders whose frames are too oxidized to accept an insert. A pocket insert into a corroded frame will fail at the perimeter and void its own warranty. Tear-out lets us correct the rough opening, re-flash the entire perimeter against salt and water, and bring the house into current Wind-Borne Debris Region compliance.
Call TruePane Windows & Doors at (954) 280-4413 for a free estimate on custom windows and doors in Jensen Beach. A live person answers, and we will give you a written, line-item quote. We stand behind it.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Jensen Beach and the Treasure Coast with custom window and door work done right.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.