Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Custom Windows & Doors Across Pinellas Park
Custom windows and doors in Pinellas Park usually mean one of two things: replacing original jalousie windows that insurance companies no longer accept, or fitting an older concrete block home with openings that were never designed for standard-sized units. That’s our bread and butter. We’ve worked through the Mainlands of Tamarac, along Park Boulevard, and into the neighborhoods off 66th Street enough times to know exactly what inspectors will look for and what the original framing will do when you open the wall. If you’re pricing a replacement or planning a full conversion to impact-rated glass, call us at (954) 280-4413 for a free estimate with real numbers on paper.
Why TruePane Windows & Doors Is Pinellas Park’s Preferred Custom Windows & Doors Company
We don’t run a franchise playbook. We’re a second-generation glazier operation, led by Dale Kessler, and the standard on every job is the same one Dale keeps on the whiteboard: if the pane is not true, the job is not done. That applies to a standard impact window install on 62nd Avenue and to a fully custom arched unit going into a Mainlands rancher. Pinellas Park customers call us because we answer the phone with a live person, we show up when we say we will, and every quote lists manufacturer lines side by side on paper so you can see exactly what you’re buying. Our Custom Windows & Doors team registers both manufacturer warranty layers in writing before the truck leaves your driveway. That’s The Keystone Standard, and we’ve been doing it that way since 2008, building on years of family craft in the trade.
We’re also local in the way that counts. Dispatch and scheduling are coordinated from our Miami office, but our crews work Pinellas Park regularly, and we’ve walked enough Mainlands properties to know the rough opening on a 1964 jalousie unit before we measure it twice. Every technician is background-checked and uniformed, works in your home the way they’d work in their own mother’s, and leaves you with a written workmanship guarantee that runs 90 days with no paper fights.
Our Custom Windows & Doors Services in Pinellas Park
We install, replace, and service residential windows and doors across Pinellas Park, and we’re an authorized installer for more than a dozen manufacturer lines, including, PGT, CGI, and ES Windows. The sub-services below are the ones that come up most often in Pinellas Park’s older housing stock.
Custom Shape Windows
Many Pinellas Park homes from the 1950s through 1970s have window openings that don’t match any standard size on a manufacturer’s order sheet. Arched, radius, angled, shaped to fit a gable or a porch enclosure. We order custom shape windows from manufacturers who cut to the actual opening, not to a catalog, and we account for the framing corrections the original CBS construction usually needs. It’s common in the Mainlands to find an opening that was roughed in for a louvered frame and never updated.
Oversized Glass Panels
For living rooms that face the lake in the Mainlands, or for sections of wall that homeowners want opened up, oversized glass panels deliver light and sightlines that smaller units can’t. These installs require heavier framing, bigger headers, and structural review in Pinellas Park’s wind-borne debris zone. We handle the engineering, the permitting, and the manufacturer-side ordering so a 120-inch panel carries the right Florida Product Approval number and wind rating.
Architectural Grilles & SDLs
Simulated divided lites and architectural grilles matter a lot in Pinellas Park’s 55-plus communities, where homeowners want impact performance without turning the front of the house into a glass wall that reads like a condo. We can build SDL profiles that look like the original divided-light pattern of a 1960s jalousie, with impact-rated laminated glass carrying an FPA number. The result is a window that satisfies the code and keeps the original character of the house. We quote manufacturer lines side by side so you can see the price difference between a true SDL and a grille-between-glass mimic before committing.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Pinellas Park
We’re an authorized installer for the lines that show up most in Pinellas Park insurance-compliance work: PGT, CGI, ES Windows, and CWS. We stock common replacement hardware, rollers, and seals for these lines locally, so a stuck slider or a worn track on a CGI unit doesn’t wait two weeks on a factory order. We also service and replace Andersen, Pella, Marvin, and Milgard products for homeowners who already have those brands and want to keep them consistent.
Common Custom Windows & Doors Problems We See in Pinellas Park Homes
- Jalousie windows that insurers refuse to cover. Original louvered glass and aluminum jalousie doors appear throughout the Mainlands of Tamarac and older blocks off 49th Street. Florida insurers now actively refuse to write or renew policies on homes that still have them because the units cannot meet the wind-borne debris requirements in Pinellas County’s designated region.
- Salt corrosion on frames, hardware, and weep systems. Pinellas Park sits between Tampa Bay and the Gulf of Mexico, and the air carries salt from both directions. Aluminum frames pock and bind, weep holes clog with corrosion, and hardware fails years before it would inland. Any custom window specified for this city needs coastal-rated finishes and stainless steel hardware, not the standard catalog offering.
- Undersized rough openings on CBS homes. The original concrete block openings around jalousie units were framed for louvered glass, not modern impact frames. On most Mainlands conversions, every opening needs bucking, furring, and stucco repair. Contractors who don’t budget for that get red-tagged and hand the homeowner a change order mid-job.
- Missing flashing and waterproofing behind old frames. When a 1960s jalousie frame comes out, we commonly find no flashing tape, no sill pan, and bare block behind the stucco. If the new unit goes back without correcting that, water gets driven in during summer storms and the homeowner deals with a leak inside a year.
Pricing for Custom Windows & Doors in Pinellas Park, FL
A standard impact-rated replacement window in Pinellas Park typically runs $850 to $1,400 per opening installed, depending on size, manufacturer line, and the framing work the rough opening requires. A custom shape window, arched or radius, runs higher: $1,800 to $3,200 per unit on average in this market because the unit is cut to order and the installation almost always includes structural work. Jalousie-to-impact conversions in the Mainlands routinely run $1,400 to $2,200 per opening once you account for bucks, furring, stucco repair, and sill waterproofing. Oversized panels start around $3,500 and climb with engineering and header reinforcement. We write allowances for that framing work into the contract upfront, and any surprise is priced and approved by you in writing before we touch it. Call (954) 280-4413 and we’ll give you a free line-item estimate specific to your home.
We Also Serve Cities Near Pinellas Park
If you’re outside Pinellas Park but nearby, we cover Dunedin, Largo, Seminole, and Bay Pines as well. The same crews, the same Keystone Standard, and the same free estimate process. You can read more about what we do on our Pinellas Park service page, or just call and tell us what you’re dealing with.
Serving Pinellas Park, FL - Our Local Coverage Area
We’re based in the Pinellas Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Custom Windows & Doors in Pinellas Park
Because the original CBS rough openings were sized for louvered frames, not standard impact units, and the code requires the entire assembly including framing, flashing, and anchoring to meet current standards. Inspectors red-tag jobs where the installer tried to wedge a standard unit into an opening without bucks, furring, shims, and stucco repair. When our crew opened up a 1963 Mainlands home to replace its jalousie windows with impact-rated custom units, we found the original openings were undersized on nearly every window, and we wrote allowances for that framing work into the contract so the final permit inspection passed on the first visit. Call (954) 280-4413 to get a quote that includes the real opening work.
You can keep them only if your insurer will still write the policy, and right now most Florida carriers refuse jalousie windows outright in Pinellas County’s Wind-Borne Debris Region. Any replacement window or exterior door must carry a Florida Product Approval number and meet design wind speeds around 130 mph. That means impact-rated glass or an approved shutter system. If you sell the house, the buyer’s insurer will flag the jalousies too, which is why the replacement wave in the Mainlands is so concentrated. We can quote impact units that mimic the original divided-light look, but they will be rated and code-compliant.
Salt from both water bodies accelerates corrosion on aluminum frames, hinges, rollers, and weep-hole systems. A standard aluminum window without a coastal-rated finish will start showing pitting and binding within a few years here, where the same unit might go a decade inland. We specify frames with coastal finishes and stainless steel hardware as the baseline for Pinellas Park installs, not as an upgrade. Oversized glass panels and custom shapes get the same treatment, and we note the finish spec on your quote so there’s no guessing in year six when a cheaper window would be failing.
The framing. Original 1950s-to-1970s CBS homes were built around louvered frames, and when those come out you routinely find no flashing, no sill pan, bare block, and rough openings that don’t match any standard impact unit dimension. You’re not paying more for the glass. You’re paying for bucks, furring, stucco repair, waterproofing, and the labor to make the new assembly code-compliant. We write allowances for that framing work into the contract before demo starts, and every surprise is priced and approved in writing. Call (954) 280-4413 for a quote that accounts for the opening, not just the glass.
Yes. A jalousie has horizontal glass slats in a grid, so we can use simulated divided lites with an impact-rated pane behind the grille to reproduce the original sightline while meeting every code requirement. The grille and SDL pattern gets matched to the original unit’s bar width and spacing, so from the street the house reads the way it did in 1965. You get the old look with an FPA number on the unit and both warranty layers registered in writing. Get a side-by-side quote for CGI, ES Windows, or CWS and we’ll show you exactly what each profile costs in Pinellas Park.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Pinellas Park with custom window and door installations built to the Keystone Standard.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.