Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Custom Windows & Doors Across Plantation Mobile Home Park
Custom window and door work in Plantation Mobile Home Park is not the same job it is in a stick-built neighborhood a mile away. You’re dealing with HUD Manufactured Housing standards, narrower rough openings, aluminum exterior skins, and wind-load documentation that a standard residential quote often leaves out entirely. We know the difference because we’ve done the re-skin work, the buck resizing, and the compliance paperwork here more times than we can count. Call (954) 280-4413 and we’ll walk you through what your unit actually needs, in plain terms, before any money changes hands.
Our Custom Windows & Doors crew has replaced everything from single-pane jalousies to full-wall glass in this community, and we understand that a mobile home rough opening rarely matches what’s sitting on a shelf at a supply house. We measure every opening twice, order to the exact frame, and register both warranty layers in writing before we leave your driveway. That’s the standard, not a guarantee buried in fine print.
Why TruePane Windows & Doors Is Plantation Mobile Home Park’s Preferred Custom Windows & Doors Company
Most window contractors in the Plantation area cut their teeth on concrete-block homes with standard framing. They’re good at that. But Plantation Mobile Home Park is a different animal. A 32-inch door buck instead of 36. Thin aluminum skin that has to be patched or re-skinned after every frame modification. HUD wind-load requirements under 24 CFR 3280.405(c) instead of the Florida Building Code. If a contractor doesn’t know that difference, you find out the hard way: a door that binds, a leak that rots the floor framing behind the panel, or an insurance agent who won’t accept the install paperwork after a named storm.
We’re the company homeowners here call after another outfit has already made a mess. Dale Kessler built TruePane’s Plantation Mobile Home Park service around a simple rule: if the pane is not true, the job is not done. That means background-checked, uniformed technicians on every visit. It means we don’t hand you a quote with a wind-load rating that’s just a number on a sticker. It means we register both manufacturer warranty layers in writing, with durations stated, before the truck pulls away. We’ve been doing it this way across South Florida since 2008, and we plan to be answering the phone in this community for the next thirty.
Our Custom Windows & Doors Services in Plantation Mobile Home Park
Impact-Rated Glazing for Mobile Home Rough Openings
Most of the older units in Plantation Mobile Home Park still carry single-pane jalousie or louvered windows. They’re not hurricane resistant in any practical sense, and they bleed conditioned air all summer. We replace them with impact-rated units sized to your existing rough opening and matched to the design pressure your specific wind zone requires. Every install includes the documentation your insurer can actually use, not just a receipt.
Aluminum Re-Skin & Flashing for Non-Standard Bucks
This is the part that catches unprepared contractors off guard. Mobile home window and door frames sit in thin aluminum exterior panels, not wood or block. When an opening is resized or a buck is modified, that panel has to be cut, shaped, and sealed back to factory-level integrity. We re-skin with the correct HUD tie-down and sealant method, not the site-built flashing technique that creates leak paths and rots the floor framing behind the panel. A door swap on a site-built home is an afternoon. Done right in a mobile home, it can be a half-day sheet-metal job, and we quote it accurately from the start.
Custom Shape Windows Sized to HUD Wind-Load Requirements
Sometimes the window you want doesn’t exist in a standard mobile home catalog. Arched tops, radius corners, fixed picture units with venting side panels: we order custom shape windows from manufacturers who build to spec, then verify the design pressure rating against your unit’s wind zone under 24 CFR 3280.405(c). We’ve done exactly that for units along Cypress Drive and the interior roads around the park, and the paperwork gets registered before the job is signed off.
Architectural Grilles & SDLs
Grilles and simulated divided lites are as much about the look as the glass. For Plantation Mobile Home Park homeowners who want the appearance of divided-light windows without sacrificing wind-load performance, we install SDLs applied inside the impact-rated glazing. The grille pattern is matched to the window line you already have, or a new one if you’re going for a full changeout. Either way, the performance rating stays intact.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Plantation Mobile Home Park
We are an authorized installer for more than a dozen manufacturer lines, including, PGT, CGI, and ES Windows. That matters here because mobile home rough openings often require a manufacturer that builds to non-standard dimensions. We quote side by side on paper, so you see exactly what each line costs and what its wind-load rating is for your specific zone. We carry a range of stock from CGI, CWS, and ES Windows that fits many of the common mobile home frame sizes in this community, which shortens turnaround when you need a fast replacement. If a unit goes out of production, we’ll tell you that on the phone before you commit.
Common Custom Windows & Doors Problems We See in Plantation Mobile Home Park Homes
- Corroded aluminum frames and tracks. South Florida’s salt-laden air eats aluminum, especially the thinner profiles used in mobile home construction. We regularly see tracks so pitted that a new window won’t seat properly, and the fix involves re-skinning the opening, not just dropping in a new unit.
- Standard 36-inch doors ordered for 32-inch bucks. This is the most common mistake we’re called in to correct. The contractor measured the door itself, not the rough opening and surrounding frame. The result is a buck that has to be cut, a half-day sheet-metal patch, and a door that may still bind in July’s humidity.
- Wind-load documentation that never gets registered. A cheap quote sometimes includes an impact-rated sticker with no design pressure report filed with the manufacturer and no compliance paperwork for the homeowner’s insurance file. When a storm hits and a claim is filed, that missing document is the difference between a payout and a denial.
- Leak paths from site-built flashing techniques. Homes on slabs with wood framing can use standard flashing. Mobile homes cannot, because water that gets behind the thin aluminum skin has nowhere to drain and rots the floor framing from the inside. We use the HUD tie-down and sealant method every time.
Pricing for Custom Windows & Doors in Plantation Mobile Home Park, FL
Here are real numbers for this community. A single impact-rated custom window for a mobile home rough opening in Plantation Mobile Home Park typically runs $450 to $900 installed, including the aluminum re-skin if the frame needs it. A full changeout of jalousie windows to impact-rated units on an older single-wide usually lands in the $3,800 to $7,200 range depending on the number of openings and the wind-zone documentation required. A custom door buck modification with a new 32-inch impact-rated entry door runs $1,200 to $2,600, with the high end covering a full re-skin of the surrounding panel. Architectural grilles and SDLs add $80 to $220 per window depending on the pattern. These numbers include manufacturer warranty registration and the compliance paperwork for your insurer. Call (954) 280-4413 for a written line-item quote, and we’ll also check whether the maintenance check or the $50-off-any-repair-over-$250 offer applies to your job. Seniors and veterans get a permanent 5% discount.
We Also Serve Cities Near Plantation Mobile Home Park
Our crews serve Plantation Mobile Home Park and the surrounding communities, including Acacia Villas, Alafaya, Altamonte Springs, and Altoona. If you’re in one of those areas and need custom windows or doors sized to a mobile home or manufactured unit, call the same number and we’ll schedule from our South Florida office.
Serving Plantation Mobile Home Park, FL - Our Local Coverage Area
We’re based in the Plantation Mobile Home Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Custom Windows & Doors in Plantation Mobile Home Park
Both can come into play. Manufactured homes in Plantation Mobile Home Park fall under HUD Manufactured Home Construction and Safety Standards rather than the Florida Building Code, so the wind-load verification follows 24 CFR 3280.405(c). The City of Plantation may still require a permit for the job, and our quotes include the permit work and the HUD compliance documentation so there’s no gap in coverage. Call (954) 280-4413 and we’ll confirm exactly what your unit needs before we order anything.
Jalousie windows have interlocking glass slats that sit in thin aluminum channels with no structural frame sealing the opening against wind pressure. Under hurricane-force loading, the slats flex, the tracks fail, and the opening becomes a hole in the wall. Impact-rated units are tested and labeled for the design pressure your wind zone requires, and that rating is registered with the manufacturer so it’s verifiable after the storm. A working jalousie isn’t protected; it’s just not broken yet.
No. Mobile home door bucks in this community are typically 32 inches wide, and the surrounding frame is thin aluminum skin. Forcing a 36-inch door into that opening means cutting the buck, and that weakens the wall’s structural connection to the frame. It also leaves you with a half-day sheet-metal patch job that most contractors never factored into the quote. The right move is a door sized to the actual buck, with the aluminum re-skinned and sealed to HUD standards. We quote that work accurately up front.
The specific design pressure depends on your unit’s wind zone under 24 CFR 3280.405(c), and that zone is determined by the home’s location and exposure. We verify the zone for your specific address before ordering anything, then match every unit to the required rating. The compliance report ties each window’s design pressure to your home’s wind zone, which is the document your insurer wants after a storm. A cheap quote that omits this step leaves you with glass that may not hold up and no way to prove it should have.
Your installer should provide a written compliance report that ties each window’s design pressure rating to your home’s specific wind zone under HUD standards, plus copies of the manufacturer warranty registrations with durations stated. We do this as part of every install in Plantation Mobile Home Park, and the paperwork goes to you before the crew leaves. If your agent wants to review it, we’ll walk them through it on the phone. Call (954) 280-4413 before you start the project and we’ll explain exactly what the documentation package includes.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Plantation Mobile Home Park with custom windows and doors built to HUD wind-load standards.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.