Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCGI Shingle, Tile & Metal Roofing in Fort Lauderdale: What to Know First
CGI shingle, tile & metal roofing in Fort Lauderdale is a specialized job, and we treat it that way. We’re an independent CGI service provider, not a franchise crew working off a generic script. Typical turnaround for a shingle, tile or metal roofing repair on a CGI product runs one to two days once we’ve diagnosed the issue and have the right parts on hand. The honest price posture is this: we quote the job on paper before we start, and the number we put down is the number you pay. If you own a CGI roof system and something’s not right, call (954) 280-4413 and we’ll talk through what you’re seeing.
How CGI Products Fail - and How We Fix Them
- Loose or cracked concrete tile on older CGI tile roof systems. In Fort Lauderdale, the summer heat and afternoon thunderstorms work concrete tiles hard. We see hairline cracks along the tile edges where the fastening points sit, usually because the original underlayment has thinned and the tiles are shifting. The fix is replacing the damaged tiles, checking the fastening pattern, and replacing the underlayment in the affected section so the new tiles sit true.
- Shingle granule loss and curling on CGI shingle roofs exposed to salt air east of Federal Highway. Shingles near the coast take a beating from salt and wind. Curling shingles with heavy granule loss are a sign the roof deck is retaining moisture. We replace the damaged shingles, inspect the deck for soft spots, and address the ventilation issue so the new shingles don’t fail the same way.
- Metal roof panel oil-canning and fastener backout on CGI standing seam systems. This is the one we see most on metal jobs. Oil-canning, that wavy look in the metal, happens when panels are fastened too tight or the roof framing has moved. Fasteners back out over time with thermal expansion. We adjust the panel tension, reseat or replace the fasteners, and re-secure the panels so they lay flat and quiet.
- Water intrusion at roof penetrations, especially around vents and skylights on CGI shingle and tile roofs. This is not a CGI defect. It’s a flashing detail that failed, and frankly it’s the most common leak source we find on any brand. We pull the old flashing, inspect the penetration, and install new flashing with the right sealant for Coastal Florida. The product gets a fair chance to do its job.
- Faded or peeling factory finish on older CGI metal roof panels. The coastal sun is unkind. We don’t repaint. We identify whether the finish failure is cosmetic or has compromised the panel coating, then either refinish to spec with a matching system or replace the affected panels. The goal is the same either way: get the roof shedding water and looking right.
Our CGI Shingle, Tile & Metal Roofing Process
- 1
You call, we answer. A live person picks up at (954) 280-4413, 24/7. No voicemail tree. We ask what you’re seeing, where the water’s showing up, and what the roof material is.
- 2
We come out and look. A background-checked, uniformed technician arrives on time, walks the roof or the attic, and documents what’s failing. We don’t guess from the driveway.
- 3
Diagnosis on paper. You get a written diagnosis with photos, and a line-item quote. If the panel is not true, the job is not done. But the quote comes first, and it doesn’t change once we start.
- 4
Parts decision. We run OEM CGI parts when the job calls for it. When a quality aftermarket part does the same job for less without voiding the warranty, we tell you, and we put both options on paper side by side.
- 5
The repair. We fix the issue, clean the work area, and test the repair to confirm it’s shedding water and holding fast.
- 6
The guarantee. Every job carries the Done Right Promise. If it’s not right, we come back and make it right. No paperwork fights, no arguing.
What CGI Shingle, Tile & Metal Roofing Costs in Fort Lauderdale
Straight numbers, because that’s how we do business. These are ranges for the CGI jobs we do most often in Fort Lauderdale:
- Shingle repair (loose, curling, or damaged shingles on a CGI roof): $350-$800 per section, depending on size and roof pitch.
- Tile replacement (cracked or broken CGI concrete tiles): $18-$32 per tile installed, plus underlayment if needed.
- Metal roof fastener reseat and panel adjustment: $400-$900 per affected area, higher if panels must be removed and reinstalled.
- Skylight or vent reflash on a CGI roof: $275-$600 per penetration, depending on flashing condition.
- Full roof underlayment replacement under existing CGI tile: $3.50-$6.00 per square foot; this is a bigger job, not a patch.
What moves the price: roof height and pitch, how much underlayment has failed, and whether we’re matching OEM parts or using a quality aftermarket line. No surprises on the bill. Call (954) 280-4413 for a free estimate, and we’ll put the number in writing before any work starts.
Why Fort Lauderdale Homeowners Call TruePane Windows & Doors for CGI Work
We’ve been doing this work in Fort Lauderdale long enough that the answer writes itself. Dale Kessler grew up in Sailboat Bend, and the company has served local communities since 2008. We train apprentices into journeymen. We sponsor county fairs and church roof funds because we plan to be here in thirty years. Our technicians are background-checked and uniformed, and they measure every opening twice before a crew ever touches a truck. We are an authorized installer for more than a dozen manufacturer lines, including PGT, CWS, ES Windows, and ECO Window Systems, so when a job calls for a different product or a brand-to-brand comparison, we can quote it side by side on paper. As an independent CGI service provider, we also carry the parts knowledge and failure modes specific to CGI products, and we stand behind the work with the Done Right Promise. A square deal, in writing. That’s the whole point.
FAQs
In most cases, no, as long as the repair is done correctly and with parts that meet CGI’s specifications. We use OEM CGI parts when the job calls for it and document the work in writing, so you have the paper trail if a warranty claim ever comes up.
We typically schedule a diagnostic visit within a day or two, and for active leaks we prioritize the call. Call (954) 280-4413 and a live person will get you on the schedule, not a callback form.
We handle repairs first and foremost. When a full replacement is the right call, we’ll quote it honestly and tell you if a different product line might serve the house better. We don’t push replacements when a repair will hold.
Sometimes, yes, and sometimes no. For structural components and warranty-sensitive areas, we use OEM CGI parts. For cosmetic pieces and older models where OEM is discontinued, a quality aftermarket part can do the job at a lower cost. We’ll show you both options on paper before any work begins.
Because we work on CGI products specifically, we know this brand’s failure modes, and we’ve been serving Fort Lauderdale long enough that our name is on the work. No franchise playbook. No surprise line items. If the pane is not true, or the roof is not right, the job is not done.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Fort Lauderdale and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.