Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCGI Windows & Doors in Anna Maria, FL | TruePane Windows & Doors
We provide independent CGI service across Anna Maria, and the quick answer is this: TruePane Windows & Doors has spent more than 20 years working on CGI’s StormGARD, Estate Collection, and Commercial Storefront lines in coastal Manatee County. What makes our work here different is the dual-salt exposure. Every home on this barrier island takes corrosive air from the Gulf and the Bay at the same time, and CGI hardware fails differently under that load than it does even a mile inland. Call (954) 280-4413 for a free estimate on any CGI window or door in Anna Maria.
We’re not a CGI factory branch, and we don’t claim to be. Dale Kessler founded TruePane in 2008 after decades in the trade, and his rule on the whiteboard has not changed: if the pane is not true, the job is not done. That standard shapes every CGI repair and replacement we take on in the 34216 and 34217 ZIP codes. For a full picture of what CGI sales & service covers, see our brand page.
Why Anna Maria Residents Choose Us for CGI Service
CGI builds a marine-grade product, but Anna Maria demands a marine-grade service approach to match. The island sits less than a mile wide between the Gulf of Mexico and Tampa Bay, and that geometry means salt-laden air reaches both the east and west sides of every structure. Frames pit faster here. Hardware seizes faster. Gaskets break down faster. A crew that treats CGI service in Seminole or inland the same as Anna Maria is setting you up for a callback.
Dale Kessler learned the trade at McFatter Technical College in Davie and spent close to two decades installing and repairing impact-rated units along South Florida’s coastal corridor before founding TruePane. He’s put impact glass in homes from Coral Ridge to Dania Beach, and brought that experience here to Anna Maria. We hire local, train apprentices into journeymen, and approach every job like we plan to answer the phone in this town thirty years from now. Because we do. We also maintain our service footprint across the broader Anna Maria service area, from the cottages on the west end to the newer elevated homes near the bay.
Common CGI Windows & Doors Problems We Solve in Anna Maria
- Fused or corroded hinge pins on StormGARD casement sashes. Salt spray attacks the stainless hardware on casement windows faster here than anywhere inland. On Anna Maria’s west end, we regularly see hinge pins that have locked solid within three to four years. We replace them with OEM CGI hinge kits and re-bed the hardware in marine-grade sealant.
- Failed compression bulb gaskets on Estate double-hungs. The afternoon sea breeze off Passage Key drives moist, salty air directly against window frames, and the compression bulb gaskets on CGI Estate double-hungs are the first wear point. When they go, water intrusion starts at the meeting rail. We stock OEM gasket sets and replace them before the damage spreads to the sash or jamb.
- Deteriorating sill dams on sliding glass doors. Sand and salt spray collect in the sill tracks of Anna Maria homes, and on CGI sliding doors the sill dam is what keeps that brine from rolling into the house. Once it deteriorates, the track corrodes and the rollers bind. We replace sill dams, clean the track, and install new OEM rollers when the wear warrants it.
- Stress cracks at impact-glazed corner seams on elevated piling homes. Houses built on pilings flex differently than slab-on-grade homes. The repeated wind-load movement can stress the corner seams on impact glazing, particularly on larger fixed units. We assess the crack, determine whether it’s cosmetic or structural, and present repair-versus-replace honestly.
- Corrosion-welded balance shoes on double-hungs. This is the one that catches homeowners off guard. The zinc-plated balance shoe inside the jamb liner corrodes, expands, and locks the sash in place. We see it constantly on older Anna Maria cottages with Gulf-facing bedrooms. We free the sash, install OEM stainless shoes, and rebalance the window.
CGI Service in Anna Maria: What Local Conditions Mean for Your Equipment
Here is the fact that does not appear on generic CGI pages: on Anna Maria’s west end, the prevailing afternoon sea breeze drives salt spray directly across Passage Key and into window tracks on South Bay Boulevard and Gladiolus Street. CGI frames there show pitting on the latch side of double-hungs within three to four years. That same corrosion pattern does not show up even one mile inland in Palmetto or Bradenton Beach. It is a function of the island’s dual exposure. The Gulf drives salt from the west. Tampa Bay adds a second layer from the east. Combine that with Manatee County’s Wind-Borne Debris Region requirements, and every CGI window on this island is working harder than the manufacturer’s coastal test standard assumes.
For homeowners here, that means maintenance schedules get shorter. Weatherstripping that would last seven years on the mainland might last four on Anna Maria. Hardware that would hold up a decade in Bradenton might seize in five seasons here. We plan our service recommendations around that timeline, not around a generic product manual.
CGI Models & Products We Service in Anna Maria
We work on the full CGI residential and light commercial lineup. That includes the StormGARD impact casement and fixed windows, the Estate Collection double-hung and sliding windows, the Classic Series awning and picture windows, and CGI Commercial Storefront and curtain wall systems. Our parts strategy is straightforward: we stock OEM CGI replacement parts whenever possible because aftermarket tolerances rarely match CGI’s marine-grade extrusions. Hinge kits, gaskets, rollers, and lock sets. For discontinued or cosmetic trim, we source high-quality aftermarket profiles and always show you repair-versus-replace in terms of remaining service life against Anna Maria’s salt corrosion cycle.
CGI Service Pricing in Anna Maria
CGI service pricing depends on the failure mode and the part. Here is an honest table of what we typically see:
- StormGARD casement hinge replacement: labor and OEM parts run $180 to $320 per sash, depending on access. Elevated piling homes often require ladder work, which adds to the labor.
- Estate double-hung gasket replacement: typically $140 to $260 per window, including new OEM compression bulb gaskets and exterior perimeter resealing.
- Sliding glass door sill dam and roller rebuild: $220 to $390 per door, with OEM rollers and marine-grade sealant.
- Balance shoe replacement on double-hungs: $150 to $280 per sash, including freeing the corrosion-welded component and installing OEM stainless shoes.
- Full service call diagnostic: applied toward any repair we perform. If you decide not to proceed, you pay only the diagnostic fee.
These are honest ranges for Anna Maria’s market, not phone quotes. Every job starts with a written line-item estimate, so you see exactly where the money goes. Call (954) 280-4413 to schedule yours. Estimates are free.
Serving Anna Maria, FL - Our Local Coverage Area
We’re based in the Anna Maria area and know this community well, just as we know Dunedin CGI service needs. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - CGI Windows & Doors in Anna Maria
Your casement hinges are failing because Anna Maria’s dual-salt exposure attacks the stainless hardware at a much faster rate than Bradenton’s single-exposure environment. Salt-laden air from both the Gulf and Tampa Bay bonds with the grease and accelerates galvanic corrosion. We replace the seized hardware with OEM CGI hinge kits and re-bed them in marine-grade sealant to slow the cycle, similar to CGI repair in Holmes Beach. On west-end homes along South Bay Boulevard, this repair is typically needed every three to four years. Call (954) 280-4413 and we’ll come take a look.
Generally, no. Jalousie frames were never engineered to carry the weight or withstand the wind load of CGI impact glazing. The proper path on Anna Maria’s older cottages is full-frame replacement with impact-rated units, often custom-sized to fit the original wood-frame openings while maintaining the low-profile coastal look. We do this work regularly, and we can guide you through the options. Call (954) 280-4413 to have us measure the openings.
Yes, provided they are the impact-rated Estate Collection units with the proper glazing and framing. CGI’s impact-rated double-hungs are designed and tested to meet Florida Building Code wind-borne debris requirements without supplemental shutters. But the installation must be correct, with proper anchoring to the existing structure. A window that meets code in the lab still fails inspection if the install is sloppy. That’s why we measure twice before the crew touches a truck.
On Anna Maria, plan on replacing weatherstripping on CGI sliding doors every three to five years. The dual-exposure salt air breaks down the compression bulbs and brush seals faster than on the mainland. If you can see light through the seal, feel a draft, or hear the door rattle in the frame, the weatherstripping is done. Call (954) 280-4413 for a no-pressure inspection; we’ll tell you if you’ve got life left in the seal.
It depends on the extent of the corrosion and the inspector’s assessment. If the corrosion is surface-level and the frame remains structurally sound, a proper repair with marine-grade sealant and OEM hardware will typically satisfy a wind mitigation inspection. If the corrosion has compromised the frame’s structural integrity or the anchoring points, replacement is the only path. We’ll assess honestly and tell you before any money changes hands. Call (954) 280-4413 for a written evaluation.
Service Areas Near Anna Maria
TruePane serves Anna Maria and the surrounding coastal and inland communities. For CGI service near the Orlando area, see our CGI service in Apopka page. We also cover CGI service in Astatula for homeowners and light commercial clients in that area. From the barrier island communities of Bradenton Beach and Holmes Beach to the mainland neighborhoods of Manatee County, we’re the CGI service crew that answers the phone.
Book Your CGI Service in Anna Maria Today
If your CGI windows or doors are binding, leaking, or showing salt corrosion, don’t wait for the next storm season to test them. Call (954) 280-4413 to schedule your free estimate. A live person answers, any hour, any day. We’ll measure twice, price the job on paper, and stand behind the work.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Anna Maria since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.