Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCGI Windows & Doors in Boca Raton, FL | TruePane Windows & Doors
We provide independent CGI window and door service across Boca Raton, from Boca West to the Intracoastal, and also offer Deerfield Beach Cgi service. The work here is shaped by one fact most contractors miss: nearly every replacement in Boca Raton has to clear both a Palm Beach County impact inspection and a community Architectural Review Committee vote before a permit gets issued. Our techs rebuild and retrofit CGI Estate, Targa, Sentinel, and Classic units for both standards at the same address. Call (954) 280-4413 for a free estimate.
Why Boca Raton Residents Choose Us for CGI Service
Dale Kessler learned the trade at McFatter Technical College and spent two decades working glass and framing along South Florida’s coastal corridor before founding TruePane. That matters in Boca Raton because the CGI units here take abuse from two directions: salt air east of I-95 and sand grit from the landscaping everywhere else. Our techs have worked inside Boca’s gated communities long enough to know which CGI hardware fails first in which neighborhood. We carry a parts bench of CGI-specific locking hooks, rollers, and glazing beads so repairs happen without waiting on a distributor shipment from upstate. Every job gets measured twice before a truck rolls, and both warranty layers get registered in writing before we leave the driveway. That’s The Keystone Standard, and it’s how we’ve done things since 2008 of community service.
If you’re weighing repair against replacement, we’ll tell you straight. We rebuild a sash or swap a roller before quoting a full window. But if the frame shows corner weld failure or pitting from years of salt air, replacement is the cheaper long-term call. That’s the honest answer, and it’s the one we’d give our own mothers.
Common CGI Windows & Doors Problems We Solve in Boca Raton
- Seized locking hooks on Estate Series casements. The factory-installed hooks strip or seize after repeated exposure to salt-laden air east of I-95. A window that won’t lock won’t hold a positive seal, and Palm Beach County inspectors flag it during wind mitigation reviews. We replace the hook assembly with OEM hardware and set the closure force to manufacturer spec.
- Targa Series rollers that bind and jump the track. Sand and shell grit from Boca Raton’s landscaping mix works into the sill track and delaminates the horizontal rollers. Woodfield Country Club and Boca Pointe homes see this constantly. We flush the track, replace the roller cartridges, and adjust the alignment so the door glides instead of grinding.
- Fogged glass on original Targa insulated units. Argon leaks at the glazing bed turn the glass cloudy, and a lot of Boca HOAs flag fogged units during resale inspections. If the frame is sound, we can often replace the insulated glass unit without replacing the whole sash. If the extrusion shows corrosion at the glazing channel, we’ll quote a new sash instead.
- Hairline stress cracks at corner welds. Western exposure units in communities like Boca West take brutal afternoon sun, and aluminum frames expand enough to crack at the corner welds. That lets air and water through. A cracked weld isn’t repairable; we’ll quote a replacement that matches the ARC-approved finish.
- Jalousie window compliance failures. Scores of Arvida-era homes across Boca Raton still have original louvered glass, which fails current Florida Building Code wind standards outright. We replace these with CGI impact-rated units that satisfy the building inspector and the HOA’s aesthetic requirements at the same time.
CGI Service in Boca Raton: What Local Conditions Mean for Your Equipment
Boca Raton’s ARC-driven replacement market creates a dual-compliance headache that doesn’t exist in Delray Beach or Boynton Beach. A window can pass Palm Beach County impact testing and still get rejected by a community like Broken Sound because the frame color or glass tint doesn’t match the approved palette. We learned this the hard way on a job off St. Andrews Boulevard in Boca West. Our crew replaced a row of corroded single-pane aluminum jalousies with CGI Sentinel impact casements, but the ARC committee initially rejected the bright-white frame as too stark against the original bronze finish. We pulled a CGI custom bronze anodized extrusion sample, resubmitted with the glazing cut sheet, and got approval without changing the structural spec. The homeowner’s wind mitigation credit was issued the same week. That’s why every quote we write for Boca Raton includes an ARC submittal package with CGI finish swatches and glazing samples. If it is not right on paper, it will not be right on the wall.
CGI Models & Products We Service in Boca Raton
We service the full residential CGI line: the Estate Series, Targa Series, Sentinel Series impact casements and awnings, and the Classic Series single and double hungs. We default to OEM CGI hardware and glazing beads because the extrusions and cam locks are not interchangeable across series. Aftermarket rollers or weatherstripping only go in when CGI has discontinued the profile, and only after we stress-test for fit and closure force. Our parts bench holds CGI locking hooks, roller cartridges, glazing beads, and balances for fast turnaround across Boca Raton. Call (954) 280-4413 for CGI sales & service help.
CGI Service Pricing in Boca Raton
CGI repair pricing in Boca Raton runs roughly $185 to $340 for roller and lock hardware replacement, $240 to $410 to replace a fogged insulated glass unit, and $520 to $1,050 for a full sash rebuild with new glazing and hardware. Full-frame replacements run higher, and the ARC submittal package adds a small fixed fee. Two things push cost up here: salt-air corrosion that complicates every hardware removal, and the dual-permit reality that demands more prep work than a standard unincorporated county job or a Pompano Beach Cgi service call. Every estimate is free, written, and line-itemed, with no surprise entries on the final bill. Call (954) 280-4413 for an exact quote on your CGI windows or doors.
Serving Boca Raton, FL - Our Local Coverage Area
We’re based in the Boca Raton area and know this community well, with Coconut Creek Cgi service also available. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - CGI Windows & Doors in Boca Raton
Not automatically. Boca Pointe’s ARC has an approved finish palette, and a non-standard frame color will likely get rejected even if the window meets Palm Beach County impact code. We include CGI finish swatches and glazing samples with every ARC submittal so the committee sees exactly what they’re approving. Call (954) 280-4413 and we’ll bring the full swatch set to your estimate.
The binding comes from sand and shell grit working into the sill track, which delaminates the original factory rollers. Winter’s drier air makes the problem louder and more abrupt, but the wear happens year-round. We replace the roller cartridges with OEM or stress-tested aftermarket parts and realign the door. Call (954) 280-4413 for a repair quote, estimates are free.
Usually you can replace just the insulated glass unit. If the frame shows corrosion at the glazing channel or the corner welds are cracking, a new sash is the smarter investment. We’ll open the unit up and tell you which path makes sense before quoting anything. Call (954) 280-4413 to schedule an inspection.
CGI doesn’t manufacture an impact-rated jalousie, because no louvered design meets current wind-borne debris standards. What we’ve done on several Boca Raton homes is install CGI Sentinel impact casements in a bronze anodized finish that reads visually similar to the old jalousie profile from the street. The ARC committees we’ve worked with have accepted it. Call (954) 280-4413 and we’ll bring finish samples so you can see it against your home before committing.
If the existing frame is structurally sound and the corner welds are intact, an insert replacement preserves the interior trim and costs less. If salt air has pitted the extrusion or cracked the welds, a full frame replacement is the only way to guarantee the impact rating. We’ll measure every opening twice and show you the numbers side by side on paper before you decide.
Service Areas Near Boca Raton
TruePane serves Boca Raton and the surrounding coastal corridor, including Boca Raton service area communities and nearby cities. We also provide CGI service in Boynton Beach and CGI service in Briny Breezes for homeowners whose communities face the same wind-borne debris requirements and coastal corrosion issues.
Book Your CGI Service in Boca Raton Today
We’ll be there when we say, in uniform and ready to work. Call (954) 280-4413 to schedule your free estimate, or ask about our maintenance check and permanent 5% discount for seniors and veterans. A live person answers, any hour, every day.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Boca Raton since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.