Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCGI Windows & Doors in Lake Worth Beach, FL | TruePane Windows & Doors
Lake Worth Beach Window Installation for CGI products means working on impact-rated frames that have spent years in salt air, often inside rough openings that were built when Eisenhower was president. TruePane handles CGI repair, parts replacement, and retrofit work across Lake Worth Beach, from the barrier island to the bungalow blocks west of the Intracoastal. The one thing that makes our CGI work here different: we know the jalousie-to-impact conversions, the historic district restrictions, and the wind-borne debris inspection stickers that this city’s housing stock throws at every job. Call (954) 280-4413 for a free estimate.
Why Lake Worth Beach Residents Choose Us for CGI Service
Our crew works on CGI windows and doors across Palm Beach County daily, which means we have seen every coastal-series frame fail in the exact same salt air that eats Lake Worth Beach hardware, and we keep the replacement parts and sealant systems on the truck to fix them the first visit. Dale Kessler grew up in Sailboat Bend over in Fort Lauderdale, learned the trade at McFatter Technical College, and has spent the better part of two decades putting impact-rated units into South Florida’s coastal corridor. That background matters when you’re looking at a CGI Estate slider with seized rollers and trying to figure out whether the frame is still worth saving. We’re an independent CGI service provider, not a manufacturer affiliate, which means we diagnose honestly: when a repair makes sense, we say so, and when a replacement is the only square answer, we put that on paper too. We service the full CGI sales & service range, and we have been doing it in Lake Worth Beach long enough to know which failures repeat on which streets.
Common CGI Windows & Doors Problems We Solve in Lake Worth Beach
- Salt-air pitting on Estate aluminum frames. The powder-coat finish on CGI Estate Series frames breaks down fastest at the bottom weep holes and latch keepers facing the Atlantic. In Lake Worth Beach, that means frames on the eastern-facing elevations go first. We strip, treat, and recoat the affected areas before the pitting eats through to the structural aluminum underneath.
- Slider lock cylinder and roller seizure. Salt crust builds up in the lower track of CGI sliding doors, especially on older beachside and Intracoastal homes. The rollers freeze, the lock cylinder binds, and the door becomes a fight to open. We pull the door, clean the track, and replace rollers with marine-grade stainless parts where the OEM spec was never meant for direct salt-laden exposure.
- Seal gasket shrinkage and glass fogging. Years of high humidity compress and shrink the seal gaskets around the fixed sash of impact-rated CGI Estate windows. Air leaks form, then moisture works its way between the panes and you get the fog. Replacing the sash or the glazing assembly stops the leak before the glass fails completely.
- Jalousie-to-CGI rough opening failures. The 1940s through 1960s bungalow blocks west of the Intracoastal are full of old jalousie openings that were over-cut in soft Florida pine bucks. When the new impact frame goes in, it relies on injected foam and caulk instead of a proper water-shedding flange. Eventually water finds its way in at the head. We reframe those openings with pressure-treated bucking so the CGI unit actually sheds water.
- Missing or unreadable wind-borne debris stickers. On the barrier island, Palm Beach County inspectors check for the wind-borne debris region sticker on every replacement window. We have seen final inspections fail because the original CGI warranty label was peeled or faded, not because the glass was wrong. We verify every sticker before the inspector arrives.
CGI Service in Lake Worth Beach: What Local Conditions Mean for Your Equipment
Lake Worth Beach’s concentration of 1920s through 1950s Florida bungalows, Craftsman cottages, and Mediterranean Revival buildings in and around its designated Historic District forces window and door contractors to satisfy two masters at once: Palm Beach County’s impact-resistance wind codes and historic preservation guidelines that restrict frame profiles, materials, and grid patterns. That dual compliance pressure is rare in newer neighboring cities like Boynton Beach or Greenacres, and it defines nearly every retrofit project in the older residential core. For CGI owners, the practical result is that a straightforward water leak or fogged sash on North D Street or Lakeside Drive can turn into a permit, a historic board review, and a custom frame detail before you ever get to the glass itself. We handle the whole sequence: the permit, the board paperwork where required, the reframing, and the CGI unit that actually satisfies both the wind code and the preservation office.
CGI Models & Products We Service in Lake Worth Beach
We work on the full CGI residential line: the Estate Series, Classic Series, 700 Series, and Estate Vinyl Series. When a CGI part is still available as an OEM replacement, especially sash locks, balance assemblies, or impact-rated glazing beads, we install original CGI components to keep the warranty intact and the frame alignment precise. For slider rollers or weatherstripping on units older than ten years, we often use heavier aftermarket stainless or marine-grade rubber parts because the OEM spec was never meant for direct salt-laden exposure and the job becomes a recurring repair otherwise. We keep common CGI hardware and sealant systems stocked on our trucks for faster turnaround across the Lake Worth Beach service area.
CGI Service Pricing in Lake Worth Beach
CGI service pricing in Lake Worth Beach depends on whether we are repairing or replacing, and on how much of the original rough opening needs reframing. Here are the ranges you can expect:
- Repair labor: $75 to $150 per hour, depending on the scope and difficulty
- Service call / diagnostic fee: $49 to $125 on average
- OEM CGI parts: sash locks $25 to $85, balance assemblies $45 to $140, impact glazing beads $30 to $90 each
- Aftermarket marine-grade parts: slider rollers $12 to $35 each, weatherstripping $4 to $10 per linear foot
- Complete jalousie-to-impact retrofit: varies widely with rough-opening condition and glass package, typically in the low four figures per opening
Our free estimates include line-item pricing and a written explanation of exactly what we found and what we plan to do. A square deal, in writing, before any work starts. Call (954) 280-4413 to schedule yours.
Serving Lake Worth Beach, FL - Our Local Coverage Area
We’re based in the Lake Worth Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - CGI Windows & Doors in Lake Worth Beach
No. Painting and re-roofing alone do not trigger a requirement to replace original jalousie windows with impact-rated glazing. The change comes when you pull a permit for work on the opening itself: replacing a window, enlarging an opening, or adding a new Lake Worth Beach Door Installation. At that point, Palm Beach County’s wind-borne debris code applies and the opening must be brought into impact compliance. If you’re planning a renovation that touches any opening, call (954) 280-4413 and we will tell you exactly what the permit triggers before you commit to the work.
The lower track on a CGI slider collects salt crust from the Atlantic air, and that crust grinds against the aluminum rollers until they seize. Homes east of Dixie Highway and especially on the barrier island see this constantly; the same model five miles inland rarely has the problem. The fix is to replace the OEM rollers with marine-grade stainless steel units and to reseal the track, which keeps the door sliding in the environment it actually lives in.
Yes. The Historic District guidelines allow compliant shutter systems, including the visible wind-borne debris inspection sticker requirements on the barrier island, without removing original wood windows. The catch is that any permitted work on the opening itself, like rebuilding a rotted wood buck or replacing a damaged sash, may require the entire opening to be brought into impact compliance. We handle the historic preservation side and the code side so you do not end up with a stop-work order halfway through. Call (954) 280-4413 and ask for Dale.
No. Fogging between the panes means the insulated glass unit has lost its seal, but it does not always mean the frame is compromised. On most CGI Estate units, we can replace the glazing assembly or the affected sash without pulling the entire frame out of the wall. The frame gets inspected for the salt-air pitting and gasket shrinkage that often accompany the fogging, and if that is all that’s wrong, the repair is a fraction of a full replacement. Call (954) 280-4413 for an exact quote; estimates are free.
No. Replacing rollers, weatherstripping, and other wear parts on an existing CGI sliding door is a maintenance repair and does not require a permit in Palm Beach County. The permitting requirement kicks in when you are replacing the entire door, changing the rough opening, or altering the structural frame. Simple hardware replacement stays a same-day service call, no paperwork with the county involved.
Service Areas Near Lake Worth Beach
TruePane runs CGI service calls throughout Palm Beach County, including the neighborhoods and towns right around Lake Worth Beach. That includes CGI service in Lantana, just south across the Lantana Bridge, and up the coast we cover CGI service in Largo. We also handle work in Boynton Beach, Greenacres, Palm Springs, and the unincorporated pockets east of the Intracoastal where CGI frames get hammered by the same salt air as the beachside homes.
Book Your CGI Service in Lake Worth Beach Today
Our crew pulled a CGI Estate impact slider from a 1950s CBS ranch on North D Street, just west of the Intracoastal, where the original jalousie rough opening had been poorly furred out with untreated pine. The old CGI frame was pitted along the bottom track from decades of salt spray and the screen door rollers had seized solid. We reframed the opening with pressure-treated bucking, installed a new Estate impact slider with marine-grade stainless rollers, and touched up the stucco to match the Mediterranean Revival facade. Same-day service is available for many repair calls. Call (954) 280-4413 for your free estimate.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Lake Worth Beach since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.