Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCGI Windows & Doors in New Port Richey, FL | TruePane Windows & Doors
We service and rebuild CGI windows and doors throughout New Port Richey, and we do it as an independent company, not a manufacturer arm. The one thing that separates our CGI work here is that we treat every unit as if it has to survive Pasco County’s wind-borne debris zone, which most of New Port Richey sits inside. The factory spec doesn’t account for how fast Gulf air eats aluminum hardware on Orchid Lake Drive or the older streets west of US-19. That’s where we come in. Call (954) 280-4413 for a straight answer on your CGI repair or replacement.
Why New Port Richey Residents Choose Us for CGI Service
Dale Kessler grew up around jalousie windows and Florida humidity in Fort Lauderdale’s Sailboat Bend, and he’s spent more than two decades putting impact-rated units into coastal homes from Coral Ridge to Dania Beach. What that means for a New Port Richey homeowner is simple: we’ve seen how CGI products age in salt air, and we’re not guessing when we open your window or door. We keep our CGI sales & service focused on OEM factory components when a unit is still under warranty, and we’re blunt about when a frame has pitted past the point of a reliable repair. We measure twice, we quote on paper, and we register both warranty layers before the truck leaves your driveway. That’s the Keystone Standard, and it applies to every estimate we hand out in New Port Richey.
Common CGI Windows & Doors Problems We Solve in New Port Richey
- Salt-air pitting on aluminum latch tracks and hinges. Homes facing the Gulf within a mile of the coast, which covers much of New Port Richey, often show white chalky spots on CGI aluminum hardware within three to five years. We clean, lubricate, or replace with marine-grade stainless components when the original aluminum is done for.
- Weep-hole clogging and sill rot in single-story CBS ranches. Afternoon storm lines that roll off the Gulf push wind-driven rain straight into the lower tracks of CGI sliding doors and awning units. When the weep holes clog, water backs up and stains interiors and rots sills. We clear the channels, re-slope the track where needed, and re-seal the rough opening.
- Painted-shut jalousie-to-CGI retrofits. Older New Port Richey homes with original louvered awning windows frequently have units that were painted closed decades ago. The hardware is corroded solid, and removal is destructive by nature. We budget stucco patch and re-wrap into the estimate up front.
- Double-pane seal delamination in CGI fixed and picture units. The humidity in New Port Richey works against the seal on fixed glass. Afternoon heat and overnight cooling cycles cause the panes to fog from the inside. We replace failed IGU units and re-set the glazing to factory spec.
- Rough opening shifting in older CBS walls. Concrete block homes from the 1960s and 1970s settle over time, and a shifted rough opening throws a CGI window or door out of square. We address the framing before we reset the unit, because if the opening isn’t square, the window won’t seal right.
CGI Service in New Port Richey: What Local Conditions Mean for Your Equipment
Here’s something specific to New Port Richey that doesn’t apply the same way in Zephyrhills or Wesley Chapel: the original 1960s and 1970s jalousie windows in concrete-block snowbird homes sit inside the one-mile wind-borne debris zone. That means a simple glass swap doesn’t fly. Florida Building Code requires impact-rated or approved shutter protection, and the Pasco County inspector checks the CGI NOA label against the permit, not the homeowner’s word. We’ve watched inspectors walk a property on Orchid Lake Drive and verify every single label before sign-off on a New Port Richey Window Installation. For a homeowner, that means you can’t cut corners on a retrofit here, and you shouldn’t try. We pull the permit, we install to code, and we schedule the inspection with the same care we’d take on our own homes.
A Field Example From New Port Richey
Our crew pulled four original louvered awning windows from a 1969 CBS ranch on Orchid Lake Drive. Every crank mechanism was corroded solid from salt air, and the units were painted shut. Removal peeled stucco on all four openings. We re-framed the rough openings, installed CGI service in Port Richey Estate impact single-hungs with stainless steel hardware, and re-wrapped with a liquid-applied flashing that passed the Pasco County wind mitigation inspection the same week. That’s the kind of work we do regularly in New Port Richey, and it’s why we don’t treat a window replacement as a simple swap.
CGI Models & Products We Service in New Port Richey
We work on the full CGI line: Estate Series, Classic Series, Tribute Series, and Sentinel Series. For units still under factory warranty, we order OEM components so the warranty stays intact. Once a unit is out of warranty and the aluminum hardware has been chewed up by Gulf air, we usually recommend marine-grade stainless steel hinges and rollers that outlast what CGI shipped originally. We don’t stock every part in a warehouse, but we keep the common replacement hardware local for faster New Port Richey turnaround. If you’re in the New Port Richey service area, ask us what’s on hand before you schedule.
CGI Service Pricing in New Port Richey
CGI repair and service pricing depends on what failed and whether the unit is under warranty. Service calls for hardware replacement, track cleaning, and seal repairs generally run from $180 to $450. A full-frame CGI impact window replacement in New Port Richey, where stucco patch and re-wrap are standard, typically starts near $900 per opening and climbs with size and frame condition. If we’re replacing sliding glass door hardware, you’re looking at $220 to $600 depending on the hardware grade. Every estimate is free, written, and line-itemed. We don’t add surprise charges at the end. Call (954) 280-4413 and we’ll give you an exact number for your house.
Serving New Port Richey, FL - Our Local Coverage Area
We’re based in the New Port Richey area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - CGI Windows & Doors in New Port Richey
Yes, in most of New Port Richey you do. The city largely falls within Pasco County’s wind-borne debris region, which extends roughly one mile inland from the Gulf coast. That means building code requires impact-rated or approved shutter protection on any replacement window or door, whether you’re three blocks from the Cotee River or right on the water. Call (954) 280-4413 and we’ll check your address against the current code map before you spend a dollar.
That’s salt-air oxidation. New Port Richey sits directly on the Gulf, and the salt-laden air attacks the aluminum frame and latch tracks on CGI in Tarpon Springs and nearby areas much faster than it would inland. Once pitting covers more than about 20% of the frame surface, we usually recommend full replacement rather than spot repair. For units with light oxidation, we can clean and coat the frames and switch to stainless hardware.
If the rollers and lock hardware are worn but the frame is still square and the pitting is minimal, we can often replace just the moving panels and hardware. If the track itself is pitted or the frame has shifted out of square, a full frame replacement is the honest answer. We’ll tell you which one applies to your door before we quote anything, and we’ll put it in writing.
This happens constantly in older New Port Richey neighborhoods. The inspector isn’t looking for the old windows, but the rough opening damage has to be fixed before the new CGI impact unit goes in. We re-frame to square, re-wrap the opening, and schedule the CGI service in Oldsmar wind mitigation inspection once the stucco patch is done. Pasco County inspectors want to see the NOA label on the new unit, not a story about what was there before. We handle the whole sequence.
Yes, CGI impact windows that carry the proper Miami-Dade or Florida Building Code NOA approvals typically qualify for wind mitigation credits on your homeowners insurance. The discount varies by carrier, but the inspection report documents the opening protection, and New Port Richey homeowners often see a meaningful reduction. We can give you the documentation you need after the install is complete. Call (954) 280-4413 for an exact quote, and bring your current policy if you want us to walk through the paperwork.
Service Areas Near New Port Richey
We take CGI service calls across the surrounding area, including Acacia Villas, Alafaya, Altamonte Springs, Altoona, Anna Maria, and Apollo Beach. If you’re on the fence about whether we cover your street, call and ask. We also handle CGI service in North Bay Village and CGI service in North Lauderdale for customers who own property on both coasts.
Book Your CGI Service in New Port Richey Today
Call (954) 280-4413 and a real person answers, day or night. We’ll schedule your free estimate, measure the openings, and give you a written quote. If the pane is not true, the job is not done.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving New Port Richey since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.