Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCGI Windows & Doors in Ocean Ridge, FL | TruePane Windows & Doors
Ocean Ridge Window Installation and door service means working on impact-rated CGI units that face salt air from two directions at once. We’re TruePane Windows & Doors, an independent CGI service provider, and we handle repairs, parts replacement, and full unit swaps for CGI Sentinel, Estate, Classic, and 900 Series products throughout Ocean Ridge. The difference here is simple: our crews understand what the Atlantic on one side and the Intracoastal on the other do to aluminum frames, tracks, and seals. Call (954) 280-4413 for a free estimate on any CGI repair or replacement in Ocean Ridge.
Why Ocean Ridge Residents Choose Us for CGI Service
Dale Kessler founded TruePane in 2008 after spending nearly two decades working glass and framing in South Florida’s coastal corridor, from Coral Ridge down to Dania Beach. He grew up in Sailboat Bend, watching his father reseal jalousie windows against the humidity, and the lesson stuck: coastal glass work is only as good as the details nobody sees. Our technicians work on CGI windows and doors every week in Ocean Ridge’s dual-salt environment, and they know which finishes hold up and which fail early. We carry genuine CGI replacement parts for impact glazing assemblies and safety-critical hardware, and we keep marine-grade stainless rollers, hinges, and screws on the truck because standard components don’t last here. Every job gets measured twice before anything gets ordered. If it is not right on paper, it will not be right on the wall.
We’ve served Ocean Ridge service area homeowners for years, and the call volume tells us one thing clearly: people here don’t want a sales pitch. They want a straight answer about whether to repair or replace, and they want it from someone who’s pulled enough corroded CGI tracks out of CBS openings to know the difference. That’s what we do. For broader CGI coverage, see our CGI sales & service page.
Common CGI Windows & Doors Problems We Solve in Ocean Ridge
- Aluminum frame pitting on east-facing elevations. The Atlantic side of any Ocean Ridge home gets salt-laden wind, and CGI frames on the latch side of double-hungs often show pitting within three to four years. We strip, treat, and reseal where the frame is sound; where the pitting has compromised the extrusion, we replace the unit.
- Sliding door tracks seized from corrosion. Original anodized aluminum hardware on ocean-facing exposures rusts shut within two to three seasons. We swap in marine-grade stainless rollers and tracks, and we don’t reuse factory hardware that’s already compromised.
- Weep system clogging on the Intracoastal side. Salt residue and blown sand pack into weep holes facing the waterway, trapping water inside the frame. That leads to seal failure and water intrusion. We clear the weeps and install sleeved inserts to slow the buildup.
- Thermal seal delamination on fixed and picture windows. Ocean Ridge homes run air conditioning hard against salt-saturated outdoor air, and the temperature swing stresses sealed units. When the thermal seal goes, the glass fogs permanently, which means replacement, not repair.
- Hardware failure on original CGI installs from the 2000s. Many Ocean Ridge homes were upgraded after the 2004-2005 hurricane seasons, and those fifteen-to-twenty-year-old CGI units are now hitting the end of their hardware life. Latches, hinges, and balance systems fail in sequence, and we service all of it.
CGI Service in Ocean Ridge: What Local Conditions Mean for Your Equipment
Ocean Ridge is one of the only barrier island municipalities in Palm Beach County where both the Atlantic and Intracoastal sides are within walking distance of every home. That’s not a real estate detail; it’s a corrosion detail. A single CGI window can show pitted, rusted hardware on the east face while the west face has bio-fouled weep holes packed with salt residue, and both conditions demand different treatments on the same unit. On the ocean side, we’re treating aluminum pitting and replacing steel hardware with stainless. On the waterway side, we’re clearing organic growth and replacing seal systems. Any contractor who treats one CGI window in Ocean Ridge the way they’d treat the same window in Boynton Beach is going to miss half the problem. Our crews inspect both exposures on every service call because here, both exposures are always live.
On Spanish River Drive, we pulled an original 1968 sliding glass door from a CBS ranch and found the anodized aluminum track rusted solid on the ocean side. We replaced it with a CGI Sentinel impact slider, swapped the factory rollers for marine-grade stainless, and added sleeved weep holes. Then we sealed the new flange with a double layer of polyurethane caulk, because the salt spray there eats standard silicone in under a year. That’s the kind of call that shapes how we approach every CGI job in Ocean Ridge.
CGI Models & Products We Service in Ocean Ridge
We service the full CGI residential lineup: the Sentinel Series, Estate Series, Classic Series, and 900 Series. That covers impact casements, double-hungs, fixed and picture windows, and sliding glass doors across all four product families. On warranty-covered and safety-critical components like impact glazing assemblies and stainless steel hardware, we use genuine CGI parts. On rollers, hinges, and screws, we source marine-grade aftermarket stainless or brass where they outperform what the factory shipped, because Ocean Ridge conditions are harder than the standard spec assumes. We stock the common replacement parts for these model lines locally, which means most Ocean Ridge service calls are resolved in a single visit.
CGI Service Pricing in Ocean Ridge
CGI service pricing in Ocean Ridge depends on what’s failed and which exposure it’s on. Hardware replacement, track swaps, and weep system clearing typically fall in the $180 to $340 range per window or door. Full unit replacement, including a new CGI impact-rated window or slider, runs higher because the unit itself carries the impact rating and the installation has to meet Palm Beach County wind-load code. The salt and sand here mean we quote replacement more often than repair when frames are compromised, because patched aluminum fails again within a couple of seasons. Our estimates are free and written line-item on paper, side by side. Call (954) 280-4413 and we’ll come out, measure, and tell you exactly what it costs before anything gets ordered.
Key Takeaways
- Ocean Ridge’s dual-salt environment means CGI units need exposure-specific treatment, not one-size service.
- Genuine CGI parts on safety components; marine-grade aftermarket where they outperform OEM.
- Replacement recommended over repair when frames are corroded or seals are blown.
- Free written estimates with pricing stated before work begins.
Serving Ocean Ridge, FL - Our Local Coverage Area
We’re based in the Ocean Ridge area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - CGI Windows & Doors in Ocean Ridge
Ocean Ridge sits on a narrow barrier island with salt-laden air arriving from both the Atlantic and the Intracoastal, so your CGI frames take corrosive exposure from two directions, every day. Boynton Beach homes further inland face one salt source at most, and often none. That’s why we inspect both exposures on every Ocean Ridge service call. Call (954) 280-4413 for a corrosion assessment.
Palm Beach County’s Wind-Borne Debris Region designation means any replacement window or door in Ocean Ridge must be impact-rated or protected by an approved shutter system, so yes, if you’re replacing original jalousies, the new units have to meet current Florida Building Code wind-load requirements. CGI impact products meet that standard, and we size them to fit your original CBS rough openings. Call (954) 280-4413 and we’ll spec the right units for your openings.
On the Intracoastal-facing side of an Ocean Ridge home, we recommend checking weep holes every six months and cleaning them at least annually, because salt residue and blown sand pack into them faster than in any inland location. East-facing weeps need the same inspection cycle. If you see water pooling inside the frame track after rain, the weeps are already blocked. Call (954) 280-4413 for a service visit.
In Ocean Ridge, standard anodized aluminum tracks on sliding glass doors rust shut within two to three seasons on ocean-facing exposures, so no, it’s not worth installing anything less than marine-grade stainless or brass hardware on a CGI slider here. We stock the upgraded components and install them as standard practice on every Ocean Ridge Door Installation. Call (954) 280-4413 for a parts and labor quote.
No, replacing only the glass won’t get you the wind mitigation credit, because the inspector is checking the frame anchoring, the impact rating of the full assembly, and the installation method, not just the pane. The unit has to be a complete, labeled, impact-rated assembly installed to code, which is what we provide on every Ocean Ridge replacement. Call (954) 280-4413 and we’ll walk you through what your insurer needs to see.
Service Areas Near Ocean Ridge
We provide CGI service throughout Palm Beach County’s coastal corridor from Ocean Ridge down to Boynton Beach, Delray Beach, Gulf Stream, and Briny Breezes. If you’re further out, we also cover CGI service in Ocoee and CGI service in Okeechobee for homeowners who want the same parts-first approach on their CGI windows and doors.
Book Your CGI Service in Ocean Ridge Today
If your CGI windows or doors are showing salt damage, fogged glass, or hardware that’s starting to bind, don’t wait until the next storm season. Call (954) 280-4413 and we’ll schedule a free estimate, measure everything twice, and give you a written quote before any work begins. A live person answers.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Ocean Ridge since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.