CGI Windows & Doors in Tamarac, FL

CGI Windows & Doors in Tamarac, FL | TruePane Windows & Doors

We provide independent CGI window and door service across Tamarac, from single-panel repairs on 1960s concrete-block homes to whole-house impact retrofits that satisfy both Broward County’s HVHZ code and a 55-plus HOA’s architectural review. What separates our CGI work here from anyone else’s is simple: we know which product approvals apply to a jalousie-to-impact swap in this city, and we’ll tell you on the first visit whether a repair makes sense or a full tear-out does. We are not a CGI dealer and we are not manufacturer-authorized. That independence means we quote the repair that serves you, not the sale that serves a franchise. Call (954) 280-4413 for a free estimate and we’ll put the options on paper.

Call (954) 280-4413

Why Tamarac Residents Choose Us for CGI Service

We have spent more than 15 years working on windows and doors in Tamarac’s concrete-block homes, and the bulk of them were built between 1963 and 1985. Those houses have jalousie glass, thin aluminum frames, and entry doors that were never meant to meet a modern wind-load requirement. That is our normal workday. Dale Kessler, our owner, grew up in Sailboat Bend and learned the trade at McFatter Technical College before putting in impact-rated units from Coral Ridge to Dania Beach. He’s the reason every opening gets measured twice before a truck moves, and why we won’t write a quote we cannot stand behind.

When a Tamarac homeowner calls about a CGI window or door, they’re usually not asking for a catalog. They want to know if the frame is salvageable, whether the glass meets code, and what the permit path looks like. We answer those questions directly, with the model number and the Miami-Dade Notice of Acceptance in hand. We keep genuine CGI OEM parts stocked for the models most common in this city, and when a production-run part is gone, we source a marine-grade aftermarket equivalent only after confirming the same NOA applies.

There is no voicemail tree here. A live person picks up the phone at any hour, every day. The technician who arrives is background-checked and uniformed, and he’ll explain the repair the same way to you he’d explain it to his own mother. That is not a slogan. That is the standard.

Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Tamarac since 2008.

Common CGI Windows & Doors Problems We Solve in Tamarac

Most of the CGI failures we see in Tamarac follow a pattern. The housing stock shares the same decade, the same construction, and the same weather, so the problems repeat. Here is what we handle most weeks:

• Corroded bottom corners on CGI sliding doors. In the 1960s and 70s CBS homes around Tamarac, irrigation runoff and storm water pool at the threshold. Over time the aluminum frame pits at the bottom corners, and eventually the welds fail. We evaluate the extrusion, and if it’s still straight, we replace the roller assembly and re-flash the pan. If the frame is beyond saving, we say so.
• Roller and track wear on CGI Estate sliders. A lot of these doors were re-glazed years ago with heavier laminated impact glass but kept the original standard-duty roller assembly. The extra weight eats the rollers and the track. We install the heavier-duty Sentinel roller assembly when the door’s extrusion can take it.
• Warped or seized casement operator arms on the Classic Line. Tamarac’s summer humidity is relentless, and casement cranks that never get lubricated seize up. The operator arm warps under force. Sometimes it’s a clean-and-replace of the operator assembly. Sometimes the hinge stile has twisted and the sash needs to go.
• Fogged double-pane seals on early impact units. We see this most often after the rainy season starts, when outdoor dew points climb past 75 degrees and the trapped moisture inside the failed seal fogs the glass. The frame may be perfectly sound. The glass unit is not. We can often re-glaze in the field without tearing out the opening, but the answer depends on the frame’s condition and whether the original NOA still covers the replacement.
• Jalousie-to-impact retrofits that were never done right. Tamarac has a dense concentration of original jalousie windows because they cannot be made HVHZ-compliant by any retrofit method. When someone tried a cheap insert over a jalousie frame years ago, the result is usually a leaky, out-of-square mess. We quote the full replacement and handle the HOA paperwork along with the permit.

CGI Service in Tamarac: What Local Conditions Mean for Your Equipment

Tamarac is the only city in Broward County where a 55-plus HOA can force a full-house window package change as a condition of even minor exterior painting approval. The original 1963 to 1985 community covenants still list jalousie replacement as an architectural change, not a repair. We have seen it happen in the Woodlands Country Club section west of University Drive and in communities along Commercial Boulevard: a homeowner wants to paint the house, the association says the windows have to match the current covenant, and suddenly the job is not one window. It’s every opening, one submission. That changes how we price CGI work here. Our estimates are routinely bundled as whole-house retrofits with one HOA submission and one permit package, not single-unit swaps. If you live in one of these communities, call us before you sign anything with the association. We’ll tell you what a compliant path actually looks like, and what it will cost, before the HOA tells you what it thinks.

CGI Models & Products We Service in Tamarac

We service the CGI Estate Collection, the Sentinel Series, the Targa Series, and the Classic Line. We know the extrusions, the roller types, the balance systems, and the gasket profiles on each. When a roller or a latch or a corner key fails, we try a genuine CGI OEM part first, because those tolerances match the original extrusion and the seal geometry stays correct. For older windows installed before low-E argon fills became standard, we explain what re-glazing involves and what the glass will and will not do. We stock the most common OEM rollers, latches, and balances for fast turnaround in Tamarac, and for discontinued production runs, we verify a marine-grade aftermarket part against the same Miami-Dade NOA before we install it. If the frame is pitted beyond safe re-glazing or a corner weld has cracked on the hinge stile, we recommend full replacement. We won’t patch something that will fail the next wind-load inspection.

You will not get a contractor who shows up with a generic parts bin and a shrug. You’ll get a straight answer about what your CGI unit needs, whether it’s worth repairing, and what a compliant replacement costs, side by side.

CGI Service Pricing in Tamarac

FAQs - CGI Windows & Doors in Tamarac

Why do I need a Miami-Dade NOA for a simple window swap in Tamarac if I’m not changing the size? Because the moment the window assembly changes, even as a same-size replacement, Florida code and Broward County’s HVHZ designation require the new product to carry a Miami-Dade Notice of Acceptance. The NOA is what proves the window passed the wind-load, impact, and water-resistance tests required in this wind zone. In Tamarac, there is no legal path around it, regardless of what any contractor from outside South Florida might say. Call (954) 280-4413 and we’ll show you the NOA on the exact product before you sign.

Can I reuse my existing CGI aluminum frames and just replace the glass with impact-rated laminated glass? Only if the frame extrusion is verified sound, the original product design allows for a thicker laminated package, and a valid NOA matches that combination. Many older CGI frames that were engineered for thinner annealed glass cannot legally receive a heavier impact package without voiding the original certification. That is why we pull the frame and check the mullion and gasket geometry before saying yes. Sometimes the honest answer is that a full replacement is the only compliant path in Tamarac.

My HOA requires all windows to match a specific bronze finish. Can you supply a CGI impact product in a custom color? Yes. CGI offers several finish options on the Estate, Sentinel, Targa, and Classic lines, including bronze anodized and painted finishes. We can pull the exact color spec your community’s covenant requires, order the product, and handle the HOA architectural submittal with the finish noted. In Tamarac’s 55-plus communities, this matching requirement is often the difference between an approval and a rejection, so we document it up front. Call (954) 280-4413 for a color match and a firm quote.

What happens if my original CGI window is fogged between the panes but the frame is still good in Tamarac’s humidity? The fog means the double-pane seal has failed and the insulating gas is gone. The frame may look fine, but the unit is no longer performing as an insulating or impact assembly. We can often replace the insulated glass unit in the existing frame, provided the extrusion is straight and the original glazing still meets current code. Since Tamarac’s rainy season pushes dew points high enough to make every failed seal obvious, we recommend checking fogged units before hurricane season, not after. For an exact quote, call (954) 280-4413.

Do I really need a full-frame replacement, or can I use an insert window over my old jalousie frames? In Tamarac, jalousie windows cannot be made HVHZ-compliant by any retrofit method, including an insert. The louvered glass panels have no impact rating path, and the frames were never designed to carry a sealed impact unit. A full-frame replacement is the only code-compliant answer, and it’s the only job we’ll quote in that situation. We have done dozens of these whole-house replacements in Tamarac’s older communities, and we handle the permit and HOA submittal as part of the estimate. Call (954) 280-4413 and we’ll walk the house with you.

Service Areas Near Tamarac

TruePane serves Tamarac and the surrounding Broward communities, including Sunrise, Lauderhill, Margate, Coral Springs, and North Lauderdale. We also regularly work in the Woodlands Country Club section and along McNab Road. If you’re outside the immediate area, reach out and we’ll tell you whether we can get a truck to you. For more on our reach, see the Tamarac service area page, and we offer CGI sales & service across the region. If you’re on the other coast, see CGI service in Tampa and CGI service in Tarpon Springs.

Book Your CGI Service in Tamarac Today

Call (954) 280-4413 for a free, line-item estimate on your CGI windows or doors in Tamarac. We measure twice, quote on paper, and register both warranty layers before we leave the driveway. If the pane is not true, the job is not done.

Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Tamarac since 2008.